BN-LINK SU101C

BN-LINK SU101C 7-Day Programmable In-Wall Timer Switch User Manual

Model: SU101C

1. Киришүү

The BN-LINK SU101C 7-Day Programmable In-Wall Timer Switch is designed to automate the control of your indoor lighting, fans, and motors. It offers flexible scheduling with up to 18 ON/OFF programs and 7-day options, enhancing convenience and energy efficiency in your home. This timer switch is compatible with both single-pole and 3-way wiring configurations and requires a neutral wire for installation. It is ETL listed, ensuring quality and safety standards are met.

2. Коопсуздук маалыматы

WARNING: Risk of electric shock. Installation should only be performed by a qualified electrician or a person with a thorough understanding of electrical wiring and systems. Always turn off power at the circuit breaker or fuse box before installation or servicing.

  • Үй ичинде гана колдонуу үчүн.
  • Ensure the power is OFF at the circuit breaker before beginning any work.
  • Туура иштеши үчүн нейтралдуу зым талап кылынат.
  • Do not exceed the maximum load ratings: 15A/1875W Resistive or General Purpose, 10A/1250W Tungsten, 10A/1250W Ballast, 1/2HP, 125VAC, 60Hz.
  • Conforms to UL Std.60730-1, 60730-2-7.

3. Пакеттин мазмуну

  • 1 x BN-LINK SU101C In-Wall Timer Switch
  • 1 x Дубал плитасы
  • Wire Nuts
  • Instruction Manual
Contents of the BN-LINK SU101C package including the timer switch, wall plate, and wire nuts.

Image: Package contents showing the timer switch, wall plate, and wire nuts.

4. Продукт бүтүп калдыview

The BN-LINK SU101C features a clear digital display and intuitive buttons for setting time and programs. A hinged cover protects the programming buttons and provides a manual ON/OFF switch.

Diagram of the BN-LINK SU101C timer switch control panel with labels for Prog, CLR, ON/OFF, Day, Hour, Min, and Reset buttons.

Сүрөт: деталдуу view of the timer switch control panel, highlighting buttons for programming and settings.

  • Дисплей: Учурдагы убакытты, күндү жана программанын абалын көрсөтөт.
  • Prog (Program) Button: Used to set the clock and ON/OFF programs.
  • CLR (Clear) Button: Clears previous settings or restores previous settings if pressed twice.
  • Day Button: Sets the day for current time and program modes.
  • Саат баскычы: Sets the hour for current time and program modes.
  • Min (Minute) Button: Sets the minutes for current time and program modes.
  • R (Random) Icon: Indicates Random mode is active.
  • DST (Daylight Saving Time) Icon: Indicates Daylight Saving Time is active.
  • Калыбына келтирүү баскычы: Resets all programming and the clock.
  • System Switch (behind cover): ON/OFF switch for the entire device.
  • Manual ON/OFF Door: Press the door to manually turn the attached device ON or OFF.

5. Орнотуу

Before proceeding, ensure power is OFF at the circuit breaker. This timer switch is designed for both single-pole and 3-way applications. A neutral wire is required.

5.1 Single-Pole Installation

Wiring diagram for single-pole installation of the BN-LINK SU101C timer switch, showing connections for Load Red, Hot Wire, Neutral Wire, Ground Wire, Red Wire, Black Wire, White Wire, and Green Wire.

Image: Single-pole wiring diagram for the timer switch.

Connect the wires as shown in the diagram. Ensure the blue wire is twisted with a wire nut if not used in a 3-way setup. The neutral wire must be connected.

5.2 3-Way Installation

Wiring diagram for 3-way installation of the BN-LINK SU101C timer switch, showing connections for 3-Way Wire, Load Red, Hot Wire, Neutral Wire, Ground Wire, Blue Wire, Red Wire, Black Wire, White Wire, and Green Wire.

Image: 3-way wiring diagram for the timer switch.

For 3-way setups, connect the blue wire to the 3-way wire. Follow the diagram carefully. The neutral wire must be connected.

5.3 Физикалык орнотуу

  1. After wiring, carefully place the timer into the wall box, ensuring no wires are pinched. The LCD screen should be at the top.
  2. Securely fasten the timer to the wall box using the provided screws.
  3. Attach the wall plate around the timer.
  4. Автоматтык өчүргүчтөгү кубаттуулукту калыбына келтириңиз.

Video: Official BN-LINK instruction video for the BND-60 SU101C timer switch, demonstrating installation steps.

6. Орнотуу

6.1 Баштапкы күйгүзүү жана баштапкы абалга келтирүү

  1. After restoring power, open the cover on the timer.
  2. Position the SYSTEM switch (located behind the cover) to the 'ON' position.
  3. Press the 'Reset' button (R) with a small pointed object (e.g., a pen tip) to clear all previous settings. The display will show '12:00 AM'.

Video: Official BN-LINK video demonstrating how to set up the programmable timer switch, including initial reset and time setting.

6.2 Учурдагы убакытты орнотуу

  1. Press the 'Prog' button once. The 'CLK' icon will appear on the display.
  2. Press the 'Day' button to select the current day of the week.
  3. Press the 'Hour' button to set the current hour. Pay attention to AM/PM indicators.
  4. Press the 'Min' button to set the current minute.
  5. Wait approximately 6 seconds, and the time will be automatically saved.

6.3 Жайкы убакытты (DST) жөндөө

Жайкы убакытка өтүү үчүн:

  • Locate the DST icon (sun symbol) above the 'Hour' button.
  • Press and hold the 'Hour' button for approximately 4 seconds. The clock will adjust by one hour, and the 'DST' icon will appear on the display, indicating DST is active.
  • Repeat the process to deactivate DST.

6.4 Random Security Mode

The Random Security Mode can be used to deter intruders by turning lights ON/OFF at random intervals while you are away.

  • Locate the 'RND' icon (R symbol) above the 'Min' button.
  • Press and hold the 'Min' button for approximately 4 seconds to activate or deactivate Random Security Mode. The 'RND' icon will appear on the display when active.

7. Иштөө

7.1 Иш-чараларды программалоону күйгүзүү/өчүрүү

Таймер 18ге чейин КҮЙГҮЗҮҮ/ӨЧҮРҮҮ программаларына мүмкүндүк берет. Ар бир программа КҮЙГҮЗҮҮ убактысынан жана ӨЧҮРҮҮ убактысынан турат.

  1. Press the 'Prog' button twice to enter event setup. The display will show '1 ON' and 'PROG'.
  2. Press the 'Day' button to select the desired day(s) for this program. You can select individual days or preset combinations.
  3. Use the 'Hour' and 'Min' buttons to set the desired ON time. Pay attention to AM/PM.
  4. Press the 'Prog' button once to save the ON time. The display will now show '1 OFF' and 'PROG'.
  5. Use the 'Hour' and 'Min' buttons to set the desired OFF time.
  6. Press the 'Prog' button once to save the OFF time and move to the next program ('2 ON').
  7. Кошумча программалар үчүн 2-6-кадамдарды кайталаңыз.
  8. To exit programming, press the 'Manual' button or wait approximately 6 seconds for the timer to return to the clock display.

7.2 Reviewing, Changing, or Deleting Events

Кайраview programmed events, press the 'Prog' button repeatedly. It will cycle through all 18 ON/OFF events.

  • To Change an Event: Navigate to the desired event using the 'Prog' button. Then use the 'Day', 'Hour', and 'Min' buttons to adjust the settings. Press 'Prog' to save changes.
  • To Delete an Event: Navigate to the desired event using the 'Prog' button. Press the 'CLR' button once. The time and day will be replaced with dashes. Note: You must delete both the ON and OFF settings for a program to be fully removed.

7.3 Кол менен күйгүзүү/өчүрүү функциясын өзгөртүү

The timer can operate in two modes: AUTO (timed ON/OFF) and MANUAL (manual ON/OFF).

  • With the cover closed, press the manual ON/OFF door. This will temporarily override the current program and switch the attached device ON or OFF.
  • To switch between AUTO and MANUAL modes, press and hold the manual ON/OFF door for approximately 4 seconds. The display will show 'MAN' for manual mode or 'AUTO' for automatic mode.
  • When in 'MAN' mode, the device will remain ON or OFF until manually changed again.
  • When in 'AUTO' mode, the device will follow the programmed schedule. A temporary manual override will be canceled by the next programmed event.

7.4 System ON/OFF Switch

The SYSTEM switch (located behind the cover) allows you to completely turn off the timer and the attached device.

  • Slide the SYSTEM switch to 'OFF'. The display will go blank, and the attached device will turn off.
  • All clock and program settings will remain stored even when the system is off.
  • Slide the SYSTEM switch to 'ON' to resume normal operation.

8. Техникалык тейлөө

To ensure optimal performance and longevity of your BN-LINK SU101C timer switch, follow these maintenance guidelines:

  • Тазалоо: Wipe the surface of the timer switch and wall plate with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
  • Текшерүү: Periodically check the timer switch for any signs of damage, loose connections, or unusual operation. If any issues are observed, turn off power at the circuit breaker and consult a qualified electrician.
  • Батареянын камдык көчүрмөсү: The timer switch includes a built-in rechargeable battery to maintain settings during power outages. Бул батареяны колдонуучунун тейлөөсү талап кылынбайт.
  • Экологиялык шарттар: Ensure the timer is installed in an indoor environment within the specified operating temperature range (Upper Temperature Rating: 140 °F). Avoid exposure to excessive moisture or extreme temperatures.

9. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Таймердин дисплейи бош.No power to the switch; SYSTEM switch is OFF.Check circuit breaker. Ensure SYSTEM switch (behind cover) is ON. Verify neutral wire connection.
Жарыктар программаланган убакта КҮЙГҮЗҮЛГӨ/ӨЧҮРҮЛБӨЙТ.Timer is in Manual mode; incorrect programming; SYSTEM switch is OFF.Ensure timer is in AUTO mode (press and hold manual door for 4 seconds). Review and correct program settings. Ensure SYSTEM switch is ON.
Cannot set time or programs.Timer is locked or unresponsive.Press the 'Reset' button with a pointed object. Re-enter time and program settings.
Lights flicker or do not work with LED bulbs.Incompatibility with certain LED types or minimum load requirements not met.Ensure LED bulbs are dimmable (if applicable) and compatible with timer switches. Consult bulb manufacturer specifications.
Random mode or DST not activating.Incorrect activation procedure.Press and hold the respective 'Hour' (for DST) or 'Min' (for Random) button for 4 seconds until the icon appears.

10. Техникалык шарттар

  • Бренд: BN-LINK
  • Модел: SU101C
  • Иштөө режими: ON-OFF-ON
  • Учурдагы рейтинг: 15 А
  • Operating Voltage: 125 вольт
  • Байланыш түрү: Адатта ачык
  • Которуу түрү: Push Button
  • Материал: Metal (Copper, Brass contacts)
  • Элементтин өлчөмдөрү (L x W x Y): 4.92 x 3.23 x 2.44 дюйм
  • Схема түрү: 2-way (Single-pole, 3-way compatible)
  • Монтаж түрү: Дубалга орнотуу
  • Кызматтардын саны: 18 (for programming)
  • Жогорку температура рейтинги: 140 °F
  • Туташуу протоколу: X-10
  • Ватtage: 1875 ватт
  • Шайкеш түзмөктөр: Lights, fans, motors, 3-way switches, single pole switches
  • Түсү: Арткы жарык жок
  • Эл аралык коргоо рейтинги: IP54
  • Техникалык мүнөздөмөлөрү: ETL, UL
  • UPC: 680474115662
  • Камтылган компоненттер: Wire Nuts

11. Кепилдик жана колдоо

For warranty information or technical support, please refer to the contact details provided in the original product packaging or visit the official BN-LINK webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

© 2026 BN-LINK. Бардык укуктар корголгон.

Тектеш документтер - SU101C

Preview BN-LINK BND-60/SU101c 7 күндүк дубалга орнотулуучу санарип таймерди орнотуу жана колдонуучунун колдонмосу
BN-LINK BND-60/SU101c 7 күндүк дубалга орнотулуучу санарип таймерин орнотуу жана иштетүү боюнча кеңири колдонмо. Техникалык мүнөздөмөлөрдү, бир уюлдуу, 3 жана 4 тараптуу орнотуулар үчүн зым схемаларын, программалоо боюнча көрсөтмөлөрдү жана мүчүлүштүктөрдү оңдоо боюнча кеңештерди камтыйт.
Preview BN-LINK SU101D 7-Day Programmable In-Wall Digital Timer Switch User Manual
User manual for the BN-LINK SU101D 7-day programmable in-wall digital timer switch. Covers installation, wiring (single-pole and 3-way), programming, operation, and troubleshooting for automating lights, fans, and motors.
Preview BN-LINK 7-Day In-Wall Digital Timer Installation and User Manual
Comprehensive guide for the BN-LINK BND-60/SU101d 7-Day In-Wall Digital Timer, covering technical specifications, installation for single-pole, 3-way, and 4-way setups, programming, and troubleshooting.
Preview BN-LINK BNC-U3S 6 футтук шнур менен 6 розеткалуу 7 күндүк санариптик таймер - сырткы аба ырайына туруктуу
BN-LINK BNC-U3S 7 күндүк санарип таймеринин деталдуу мүнөздөмөлөрү жана функциялары. Бул аба ырайына туруктуу сырткы таймер 6 розеткага, программалануучу графиктерге жана сырткы жарыктандырууларды жана шаймандарды ыңгайлуу башкаруу үчүн камдык батареяга ээ.
Preview BN-LINK 7 күндүк санариптик кош розеткалуу сырткы таймер - BND-60/U58S моделинин колдонуучу колдонмосу
BN-LINK 7 күндүк санариптик кош розеткалуу сырткы таймер (BND-60/U58S модели) үчүн колдонуучунун колдонмосу. Сырткы жарыктандыруу, жылытуу жана башкаларды натыйжалуу башкаруу үчүн кокустук функция жана DST сыяктуу функцияларды кантип орнотууну, программалоону жана колдонууну үйрөнүңүз.
Preview BN-LINK BND-60/U97A Кыска мөөнөттүү кайталоочу цикл таймери Колдонуучунун колдонмосу
BN-LINK BND-60/U97A Кыска мөөнөттүү кайталоо циклинин таймери үчүн колдонуучу колдонмосу. Бул колдонмо өнүмдүн өзгөчөлүктөрүн, орнотууну, 24 сааттык, күндүзгү жана түнкү башкаруунун кошумча жөндөөлөрүн, жалпы көйгөйлөрдү чечүү жана кепилдик маалыматын камтыйт.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.