HyperX Savage DDR4 Memory Module User Manual

Introduction

This manual provides essential information for the installation, operation, and maintenance of your HyperX Savage DDR4 memory modules. The HyperX Savage DDR4 memory is designed to complement Intel's 2, 4, 6, or 8 core processors, offering enhanced performance for tasks such as video editing, 3D rendering, gaming, and AI processing. These modules feature speeds up to 3000MHz and latencies of CL15, optimized for Intel's 100 series chipset and X99 chipset motherboards, supporting easy overclocking via XMP profiles.

Сүрөт: алдыңкы view of the HyperX Savage DDR4 memory module, showcasing its black heat spreader with the HyperX logo and Savage DDR4 branding.

Пакеттин мазмуну

Пакетиңизде төмөнкү заттар бар экенин текшериңиз:

• 2 x HyperX Savage DDR4 Memory Modules (8GB each, 16GB Kit)

Орнотуу жана орнотуу

Before installing the memory modules, ensure your system is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

1. Даярдоо

1. Шайкештикти текшерүү: Confirm that your motherboard supports DDR4 DIMM memory modules and the specified speed (3000MHz). Refer to your motherboard's manual for details.
2. Өчүрүү: Shut down your computer completely and disconnect the power cable.
3. Ачык иш: Open your computer's side panel to access the motherboard.

2. Модулду орнотуу

1. DIMM уячаларын табыңыз: Энелик платаңыздагы DDR4 DIMM уячаларын аныктаңыз. Кош каналдуу эс тутум үчүн туура уяча конфигурациясы жөнүндө энелик платаңыздын колдонмосун караңыз.
2. Ачык клиптер: Gently push down the retention clips at both ends of the DIMM slot.
3. Тегиздөө модулу: Hold the memory module by its edges, avoiding contact with the gold pins. Align the notch on the module with the key in the DIMM slot.
4. Модулду киргизүү: Apply even pressure to both ends of the module until it seats firmly into the slot and the retention clips snap into place. Do not force the module.
5. Кайталоо: Install the second memory module into the corresponding slot as indicated by your motherboard manual.

Сүрөт: бурчтуу view of the HyperX Savage DDR4 memory module, showing the heat spreader design and the gold contact pins.

3. Орнотуудан кийинки

1. Ишти жабуу: Компьютериңиздин каптал панелин кайра бекитиңиз.
2. Кубатты кайра туташтыруу: Электр кабелин кайра компьютериңизге сайып, аны күйгүзүңүз.

Иштөө нускамалары

After physical installation, it is important to configure your system's BIOS/UEFI to utilize the full potential of your HyperX Savage DDR4 memory modules.

Enabling XMP Profile

HyperX Savage DDR4 memory modules come with built-in Intel XMP (Extreme Memory Profile) проfileс. Бул проfiles are optimized for Intel 100 series chipsets and X99 motherboards, allowing for easy overclocking without manual timing adjustments.

1. BIOS/UEFI кирүү: Системаны ишке киргизүү учурунда, белгиленген баскычты кайра-кайра басыңыз (адатта DEL, F2, F10, же F12) to enter your motherboard's BIOS or UEFI settings. The specific key varies by motherboard manufacturer.
2. XMP жөндөөсүн табыңыз: Navigate to the memory or overclocking section within the BIOS/UEFI. Look for an option related to 'XMP', 'DOCP', 'A-XMP', or 'Memory Profile'.
3. Pro'ну иштетүүfile: Select the XMP profile (usually 'Profile 1' or 'Enabled') to automatically configure the memory to its rated speed (3000MHz) and timings (CL15) at 1.35V.
4. Сактоо жана чыгуу: Өзгөртүүлөрдү сактап, BIOS/UEFIден чыгыңыз. Системаңыз жаңы эс тутум жөндөөлөрү колдонулганда кайра жүктөлөт.

If your system does not support XMP, the memory will operate at a default JEDEC speed, typically 2133MHz or 2400MHz, depending on your motherboard and CPU.

Техникалык тейлөө

HyperX Savage DDR4 memory modules are designed for durability and reliability. Minimal maintenance is required to ensure optimal performance and longevity.

• Тазалыкты сактоо: Periodically clean the interior of your computer case to prevent dust buildup on the memory modules and other components. Use compressed air to gently remove dust.
• Туура иштетүү: Эстутум модулдарын кармаганда, алтын түстүү контакттарга же интегралдык микросхемаларга тийип албаш үчүн аларды ар дайым четтеринен кармаңыз.
• Температураны көзөмөлдөө: Ensure adequate airflow within your computer case to maintain optimal operating temperatures for all components, including memory.

Проблемаларды чечүү

If you encounter issues after installing your HyperX Savage DDR4 memory, consider the following troubleshooting steps:

• Система жүктөлбөй жатат:
  • Ensure the memory modules are fully seated in their slots and the retention clips are locked.
  • Verify that your motherboard supports the installed memory type and speed.
  • Try booting with only one module installed to identify a potentially faulty module.
• Incorrect Speed Detected:
  • Access your BIOS/UEFI settings and ensure the XMP profile иштетилген.
  • Update your motherboard's BIOS/UEFI to the latest version, as this can improve memory compatibility and stability.
• Системанын туруксуздугу же бузулушу:
  • Каталарды текшерүү үчүн эстутумду диагностикалоо куралын (мисалы, Windows Memory Diagnostic же MemTest86) иштетиңиз.
  • Кубат булагы (PSU) бардык компоненттерге жетиштүү жана туруктуу кубат берээрин текшериңиз.
  • Check for proper cooling within your system to prevent overheating.

Техникалык шарттар

Кепилдик жана колдоо

HyperX Savage DDR4 memory modules are backed by a lifetime warranty, ensuring long-term reliability and peace of mind. Free technical support is also available to assist with any questions or issues you may encounter.

For warranty claims or technical assistance, please visit the official HyperX support webсайтка же кардарларды тейлөөгө кайрылыңыз. Кепилдикти текшерүү үчүн сатып алганыңыздын далилин сактаңыз.

HyperX Support: www.hyperx.com/support