Fuxtec FX-FSR152 Wheeled Thermal Brush Cutter User Manual

1. Маанилүү коопсуздук нускамалары

Read this entire manual carefully before operating the Fuxtec FX-FSR152 wheeled thermal brush cutter. Failure to follow these instructions can result in serious injury or property damage. Keep this manual for future reference.

• Жеке коргонуу каражаттары (ЖКК): Always wear safety glasses or goggles, hearing protection, heavy-duty long pants, and sturdy, non-slip footwear when operating the machine.
• Күйүүчү май иштетүү: Gasoline is highly flammable. Handle fuel outdoors in a well-ventilated area, away from sparks, open flames, or other ignition sources. Do not smoke while fueling.
• Иш чөйрөсү: Clear the work area of debris, rocks, and other objects that could be thrown by the cutting line. Keep bystanders, children, and pets at least 15 meters (50 feet) away from the operating machine.
• Машинаны текшерүү: Before each use, inspect the machine for loose parts, damaged components, or fuel leaks. Do not operate a damaged machine.
• Мотордун чыгышы: The engine produces carbon monoxide, an odorless and deadly gas. Never operate the machine in an enclosed area.
• Ысык беттер: The engine and muffler become very hot during operation and can cause burns. Avoid contact with hot surfaces.
• Туруктуулук: Operate the wheeled brush cutter on stable ground. Be cautious on slopes and uneven terrain to prevent tipping.

2. Продукт бүтүп калдыview

The Fuxtec FX-FSR152 is a powerful 52cc wheeled thermal brush cutter designed for efficient trimming and clearing of large areas. Its wheeled design reduces operator fatigue compared to traditional shoulder-mounted brush cutters.

2.1-сүрөт: Жалпысынан view of the Fuxtec FX-FSR152 wheeled thermal brush cutter.

Негизги компоненттер:

• Мотор: 52cc 2-stroke gasoline engine.
• Рул: Ergonomic handlebar with integrated controls.
• Дөңгөлөктөр: Large pneumatic wheels for easy maneuverability.
• Кесүү башчысы: Professional trimmer head with 3mm line.
• Коопсуздук күзөтчүсү: Таштандылардын ыргытылышынан коргойт.

3. Ассамблея

The Fuxtec FX-FSR152 requires some assembly before first use. Follow these steps carefully.

1. Рулду бекитүү: Secure the handlebar to the main shaft using the provided bolts and nuts. Ensure all connections are tight.


3.1-сүрөт: Handlebar assembly point.

2. Дөңгөлөктөрдү орнотуу: Attach the pneumatic wheels to the axle. Ensure they are securely fastened and can rotate freely.


3.2-сүрөт: Wheels and cutting head assembly.

3. Mount the Safety Guard: Position the safety guard over the cutting head and secure it with the designated screws. The guard must be firmly attached to protect against debris.
4. Attach the Trimmer Head: Install the professional trimmer head onto the shaft. Refer to the specific instructions for the trimmer head for correct line insertion (3mm line).

3.3-сүрөт: Detail of the trimmer head.

4. Операция

4.1 Fueling the Machine

The FX-FSR152 uses a 2-stroke engine and requires a gasoline-oil mixture. Use unleaded gasoline mixed with high-quality 2-stroke engine oil at a ratio of 1:40 (2.5% oil). Always use fresh fuel mixture.

• Май куюудан мурун кыймылдаткычтын өчүрүлгөнүн жана муздаганын текшериңиз.
• Clean the area around the fuel cap to prevent dirt from entering the fuel tank.
• Slowly open the fuel cap to release any pressure.
• Fill the tank carefully, avoiding spills. Do not overfill.
• Securely close the fuel cap. Wipe up any spilled fuel immediately.

4.2 Моторду ишке киргизүү

1. Машинаны тегиз, туруктуу бетке коюңуз.
2. Set the ON/OFF switch to the "ON" position.
3. Кайтаруу сызыгында күйүүчү май көрүнгүчө, праймер лампочкасын бир нече жолу басыңыз.
4. Дроссельди күйгүзүңүз (муздак от алса).
5. Pull the Easy Starter cord firmly and smoothly until the engine starts. Do not pull the cord to its full extension.
6. Once the engine fires, disengage the choke. Allow the engine to warm up for a few moments before operating at full throttle.

4.1-сүрөт: Handlebar controls including throttle and stop switch.

4.3 Operating the Brush Cutter

• Hold the handlebar firmly with both hands.
• Engage the throttle to increase engine speed and activate the cutting line.
• Move the machine slowly and steadily across the area to be trimmed.
• Avoid hitting hard objects like rocks, fences, or tree trunks, as this can damage the cutting line and machine.
• To stop the engine, release the throttle and move the ON/OFF switch to the "OFF" position.

4.2-сүрөт: Fuxtec FX-FSR152 in operating stance.

5. Техникалык тейлөө

Regular maintenance ensures optimal performance and extends the lifespan of your Fuxtec FX-FSR152.

• Тазалоо: After each use, clean the machine, especially the cutting head and engine cooling fins, to remove grass, dirt, and debris. Use a brush or compressed air.
• Триммер линиясын алмаштыруу: Replace the 3mm trimmer line as needed. Refer to the trimmer head instructions for the correct procedure. Always use recommended line specifications.
• Аба чыпкасы: Periodically inspect and clean the air filter. A dirty air filter can reduce engine performance. Replace if damaged.
• Свеча: Check the spark plug periodically for wear or carbon buildup. Clean or replace as necessary.
• Күйүүчү май чыпкасы: Inspect the fuel filter in the fuel tank and replace if clogged.
• Майлоо: Ensure all moving parts are adequately lubricated as per the detailed manual.
• FUXTEC Oils: For optimal and durable operation, FUXTEC recommends using their original FUXTEC oils, manufactured in Germany.

6. Кыйынчылыктарды

For issues not listed here or if solutions do not resolve the problem, please contact Fuxtec customer support.

7. Сактоо

Proper storage ensures the longevity of your FX-FSR152, especially during off-season periods.

• Кылдат тазалоо: Clean the entire machine, removing all grass, dirt, and debris.
• Күйүүчү май: Run the engine until it runs out of fuel, or drain the fuel tank and carburetor. This prevents fuel degradation and carburetor clogging.
• Свеча: Remove the spark plug and add a small amount of 2-stroke oil into the cylinder. Pull the starter cord a few times to distribute the oil, then reinstall the spark plug.
• Сактоо үчүн бүктөлүңүз: The FX-FSR152 features a foldable structure for easy storage. Loosen the designated clamps and fold the handle assembly.

7.1-сүрөт: Fuxtec FX-FSR152 in folded position for storage.


7.2-сүрөт: Фронт view of the Fuxtec FX-FSR152 in folded position.

• Кургак жерде сактоо керек: Store the machine in a clean, dry, and well-ventilated area, away from direct sunlight and extreme temperatures.

8. Техникалык шарттар

9. Кепилдик жана колдоо

Fuxtec, as a European company based in Germany, ensures high-quality products and customer satisfaction. In case of a claim, a long-term supply of spare parts is guaranteed.

• For warranty claims or technical assistance, please refer to the official Fuxtec webсайтка же жергиликтүү дилериңизге кайрылыңыз.
• Ensure you have your model number (FX-FSR152) and proof of purchase available when contacting support.
• Original instruction manuals are available online for detailed information.