BTF-LIGHTING 16.4ft Warm White SMD5630 LED Strip Light User Manual

Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your BTF-LIGHTING 16.4ft Warm White SMD5630 LED Strip Light. Please read this manual thoroughly before use and retain it for future reference.

Коопсуздук маалыматы

Орнотуудан же техникалык тейлөөдөн мурун электр кубаты өчүрүлгөнүн текшериңиз.
This LED strip is designed for 12V DC power only. Connecting to a higher voltagе буюмга зыян келтирет.
This product is IP30 rated, meaning it is non-waterproof. Avoid exposure to water or high humidity.
Do not bend the LED strip sharply or apply excessive force, as this may damage the circuit board or LEDs.
Ensure proper ventilation around the LED strip to prevent overheating.
Балдар жетпеген жерде сактаңыз.
Only use the recommended power adapter (DC12V3A) or a compatible power supply.

Пакеттин мазмуну

Бардык компоненттердин бар экендигин жана жакшы абалда экендигин текшериңиз:

1 x BTF-LIGHTING 16.4ft (5m) Warm White SMD5630 LED Strip Light
1 x Remote Control (if included with your specific package)
Note: Power adapter is typically sold separately.

Техникалык шарттар

Бренд	BTF-Жарыктандыруу
Модель номери	56305MWW60W30
LED түрү	SMD5630
LED саны	300 LEDs (60 LEDs/meter)
Strip Length	16.4 фут (5 метр)
FPCB Board Width	10мм
Ачык түс	Жылуу ак
Түс температурасы	2700K-3000K
LED үчүн люмен	23-25 lm/LED
Working Voltage	DC 12V
Сунушталган кубат адаптери	DC 12V 3A (36W) or higher
Ватtage	30 Ватт
Суу өткөрбөйт деңгээл	IP30 (Non-Waterproof)
Иштөө температурасы	-20°Cден 50°Cге чейин
Өмүр	>50,000 саат
Сертификаттар	CE & RoHS

Орнотуу нускамалары

Бетти даярдоо: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can reduce the adhesive's effectiveness.
Сүрөт: Жакын план view of the LED strip, highlighting individual SMD5630 LEDs and designated cut points marked with a scissor icon. The strip also shows the adhesive backing being peeled.
Өлчөө жана кесүү (кошумча): If a shorter length is required, cut the LED strip only at the designated cut marks (usually indicated by a scissor icon and copper pads). Cutting elsewhere will damage the circuit and prevent the section from lighting up.
Туташуу кубаты:
- Identify the 2-pin connectors on the LED strip.
- Connect the LED strip's 2-pin connector to a compatible DC 12V power adapter (not included). Ensure polarity is correct (positive to positive, negative to negative).
- If a remote control is included, connect the LED strip to the remote controller, and then connect the controller to the power adapter.
Image: Two separate sections of the LED strip, each terminating with a 2-pin connector (red and black wires), ready for connection to a power source or controller.
Test Before Adhering: Before removing the adhesive backing, plug in the power adapter to test if the LED strip lights up correctly. This allows for troubleshooting before permanent installation.
Стопту жабыңыз: Once tested, peel off the protective backing from the adhesive tape on the back of the LED strip. Carefully press the strip onto the desired clean, dry surface. Apply firm, even pressure along the entire length to ensure good adhesion.

Иштөө нускамалары

Once the LED strip is properly installed and connected to a 12V DC power supply:

Күйгүзүү/өчүрүү: Plug the power adapter into a wall outlet to turn the strip light on. Unplug it to turn it off.
Using the Remote Control (if applicable): If your package included a remote control, refer to its specific instructions for functions such as brightness adjustment or on/off control.

Examples of warm white LED strip lighting in various indoor settings

Сүрөт: Visual examples of LED strip lighting used in different indoor environments, demonstrating the warm white illumination. This image also shows Cool White and Nature White, but this product is Warm White.

Техникалык тейлөө

Тазалоо: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Текшерүү: Periodically check the strip for any signs of damage, loose connections, or adhesive degradation.
Сактагыч: If storing the LED strip, ensure it is kept in a dry, cool place, away from direct sunlight and extreme temperatures.

Проблемаларды чечүү

Көйгөй	Мүмкүн себеп	Чечим
LED тилкеси күйбөйт.	Адаптерге электр кубаты тийген жок. Incorrect power connection (polarity reversed). Бузулган кубат адаптери. Бузулган LED тилкеси. Remote control battery dead or not paired (if applicable).	Розеткага жана кубат адаптерине туташууну текшериңиз. Ensure positive (+) and negative (-) connections are correct. Test with a known working 12V DC power adapter. Inspect the strip for visible damage, especially at cut points. Replace remote battery or re-pair according to remote instructions.
Part of the LED strip is not lighting up.	Damage to a section of the strip. Incorrect cutting.	Inspect the unlit section for physical damage or a broken circuit. Ensure cuts were made only at designated marks. Damaged sections cannot be repaired.
LEDs are dim or flickering.	Электр энергиясы жетишсиз. Бошоң байланыш.	Кубат адаптери жетиштүү кубаттуулукту камсыз кылаарын текшериңизtage (minimum 30W for this strip). Бардык туташуулардын бекем орнотулгандыгын текшериңиз.

Кепилдик жана колдоо

BTF-LIGHTING products are designed for reliability and performance. For warranty information, technical support, or assistance with your product, please contact BTF-LIGHTING customer service through the retailer where the product was purchased or visit the official BTF-LIGHTING webсайт.

Please have your model number (56305MWW60W30) and purchase details ready when contacting support.

BTF-LIGHTING 56305MWW60W30