Колдонмолор+

PEAKMETER MS6812

PEAKMETER MS6812 Cable Tracker Test Meter User Manual

Модели: MS6812

1. Киришүү

The PEAKMETER MS6812 Cable Tracker Test Meter is a professional tool designed for the installation, inspection, and maintenance of cable lines, including telephone and network cables. It assists in identifying the operational status of telephone lines, tracing wires, and performing continuity tests, making it an essential device for telecommunication and network technicians.

This manual provides detailed instructions on how to set up, operate, and maintain your MS6812 Cable Tracker Test Meter to ensure optimal performance and longevity.

2. Коопсуздук маалыматы

Please read and understand all safety instructions before using the device. Failure to follow these instructions may result in electric shock, fire, or personal injury.

  • Эгер аппарат бузулуп калса, аны колдонбоңуз.
  • Батареялар полярдуулук белгилерине ылайык туура салынганын текшериңиз.
  • Avoid contact with live circuits exceeding the device's specified voltage чектөөлөр.
  • Түзмөктү кургак жана таза кармаңыз. Аны нымдуулукка же өтө жогорку температурага дуушар кылбаңыз.
  • Түзмөктү ушул колдонмодо сүрөттөлгөндөй, анын максаттуу багытына гана колдонуңуз.

3. Продукт бүтүп калдыview

The PEAKMETER MS6812 consists of two main units: a Transmitter (MS6812T) and a Receiver (MS6812R).

PEAKMETER MS6812 Cable Tracker Test Meter showing both transmitter and receiver units

Figure 1: PEAKMETER MS6812 Transmitter (left) and Receiver (right).

3.1 Transmitter (MS6812T)

  • CONT/SCAN Switch: Selects between continuity test mode and wire tracing/scanning mode.
  • TEST баскычы: Initiates the selected test function.
  • LED көрсөткүчтөрү: Display continuity status (CONT), telephone line status (phone icon), and scan signal (SCAN).
  • RJ11/RJ45 порттору: For connecting telephone and network cables.
  • Аллигатор клиптери: Жылаңач зымдарга же терминалдарга туташтыруу үчүн.

3.2 Receiver (MS6812R)

Жакын план view of the PEAKMETER MS6812 Receiver unit

Figure 2: Close-up of the MS6812 Receiver.

  • SCAN баскычы: Activates the scanning function to detect the signal from the transmitter.
  • Үндү башкаруу терүү: Adjusts the sensitivity and volume of the audible tone.
  • LED жарык баскычы: Turns on/off the integrated LED flashlight.
  • ON/OFF баскычы: Powers the receiver on or off.
  • Гарнитура уячасы: For connecting headphones for clearer audio in noisy environments.
  • Текшерүү кеңеши: Used to detect the signal along the cable.
PEAKMETER MS6812 Cable Tracker Test Meter with its black carrying case

Figure 3: MS6812 units with included carrying case.

4. Техникалык шарттар

  • Бренд: PEAKMETER
  • Модел: MS6812
  • Материал: ABS+PVC
  • Түсү: Кара
  • Кубат булагы: Батарея менен иштейт
  • Батареялар: 1x 9V 6F22 battery (for Transmitter), AA batteries (for Receiver). Батареялар камтылган эмес.
  • Сертификаттар: CE, RoHS
  • Approximate Dimensions (Main Unit): 8.35 дюйм x 4.33 дюйм x 1.57 дюйм (21.2 см x 11 см x 4 см)
  • Approximate Weight (Main Unit): 5.64 унция (160 г)
  • Негизги функциялар: Wire tracking, telephone line testing, continuity testing.

5. Орнотуу

5.1 Батареяны орнотуу

  1. Locate the battery compartments on both the Transmitter and Receiver units.
  2. Батарея капкактарын ачыңыз.
  3. Insert one 9V 6F22 battery into the Transmitter, observing correct polarity.
  4. Insert the required AA batteries into the Receiver, observing correct polarity.
  5. Батареянын капкактарын бекем жабыңыз.

5.2 Туташтыруучу кабельдер

The MS6812 comes with various connection options:

PEAKMETER MS6812 Cable Tracker Test Meter with included accessories like RJ11/RJ45 cables and headphones

Figure 4: MS6812 with connection cables and headphones.

  • RJ11 кабели: Телефон линияларына туташуу үчүн.
  • RJ45 кабели: For connecting to network (LAN) cables.
  • Alligator Clip Cable: For connecting to bare wires or terminals where standard connectors are not available.

Connect the appropriate cable from the item under test to the corresponding port on the Transmitter (MS6812T).

6. Иштөө нускамалары

6.1 Wire Tracking (Scanning)

  1. Connect the cable to be traced to the Transmitter (MS6812T) using the appropriate connector (RJ11, RJ45, or alligator clips).
  2. Set the Transmitter's CONT/SCAN switch to the SCAN позиция.
  3. басыңыз СЫНОО button on the Transmitter to send a signal. The SCAN LED on the Transmitter should illuminate.
  4. Turn on the Receiver (MS6812R) by pressing its КҮЙГҮЗҮҮ/ӨЧҮРҮҮ баскычы.
  5. басыңыз SCAN кабыл алгычтагы баскычты басыңыз.
  6. Adjust the Volume Control Dial on the Receiver to a suitable sensitivity.
  7. Move the Receiver's probe tip along the suspected cable path. A loud audible tone indicates the presence of the signal, helping you locate the cable. The tone will be strongest when the probe is directly over the cable.

6.2 Үзгүлтүксүздүк тести

  1. Connect the cable or wire to be tested to the Transmitter (MS6812T).
  2. Set the Transmitter's CONT/SCAN switch to the УЛАНДЫ позиция.
  3. басыңыз СЫНОО button on the Transmitter.
  4. Observe the LED indicators on the Transmitter:
    • Эгерде УЛАНДЫ LED illuminates, it indicates continuity (a closed circuit).
    • Эгерде УЛАНДЫ LED does not illuminate, it indicates an open circuit or break in the wire.

6.3 Telephone Line Testing

  1. Connect the telephone line to the RJ11 port on the Transmitter (MS6812T).
  2. Set the Transmitter's CONT/SCAN switch to the УЛАНДЫ позиция.
  3. басыңыз СЫНОО button on the Transmitter.
  4. Observe the LED indicators on the Transmitter:
    • The phone icon LED will indicate the status of the telephone line (e.g., ringing, busy, idle). Refer to the specific LED patterns for detailed status interpretation (if provided on the device itself).

6.4 LED жарыгын колдонуу

Close-up of the PEAKMETER MS6812 Receiver's probe tip with the LED light illuminated

Figure 5: Receiver's LED light in operation.

The Receiver unit (MS6812R) includes an integrated LED flashlight for working in dimly lit areas.

  • To turn on the LED light, press the LED жарык баскычы on the Receiver.
  • LED жарыгын өчүрүү үчүн баскычты кайра басыңыз.

7. Техникалык тейлөө

7.1 Тазалоо

Түзмөктү жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз, анткени алар түзмөккө зыян келтириши мүмкүн.asing же ички компоненттер.

7.2 Сактоо

When not in use for extended periods, remove the batteries from both units to prevent leakage and store the device in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.

7.3 Батареяны алмаштыруу

Replace batteries when the device's performance degrades or if the low battery indicator (if present) illuminates. Always use fresh batteries of the specified type and dispose of old batteries responsibly.

8. Кыйынчылыктарды

  • Кубат жок: Батарея орнотулганын текшерип, батарейкалардын жаңы экенин текшериңиз.
  • No Signal During Wire Tracking: Ensure the Transmitter is powered on and in SCAN mode. Verify the cable connection. Adjust the Receiver's volume/sensitivity.
  • Inaccurate Continuity Test: Ensure proper connection to the wire/cable. Check for breaks or shorts in the cable itself.
  • Алсыз сигнал: Replace batteries in both units. Ensure the cable is not excessively long or shielded, which can attenuate the signal.

9. Кепилдик жана колдоо

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or further assistance, please contact the manufacturer or your local distributor.