Будерус 7738324180

Buderus Logafix универсалдуу ванна бөлмөсүнө арналган радиатор клапандарынын комплекти 7738324180 колдонуу боюнча колдонмо

Модель: 7738324180

Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Buderus Logafix Universal Bathroom Radiator Valve Kit, model 7738324180. Please read these instructions carefully before installation and retain them for future reference. This kit includes a chrome universal valve and a T-head valve set, designed for standard 2-tube heating systems.

Продукт өзгөчөлүктөрү

Buderus Logafix Universal Radiator Valve Kit

Image 1: Buderus Logafix Universal Radiator Valve Kit. This image displays the chrome-finished valve unit with its two connection points and the thermostatic control knob.

Орнотуу жана орнотуу

Installation of this radiator valve should be performed by a qualified professional to ensure correct function and prevent leaks. Incorrect installation can lead to system damage or personal injury.

  1. Системаны даярдоо: Ensure the heating system is depressurized and drained before beginning installation.
  2. Клапан багыты: Determine whether an angle or straight-through connection is required for your radiator. The universal design accommodates both.
  3. Thermostatic Head Adjustment: The thermostatic valve head can be rotated to either the right or left side for optimal access and aesthetic integration. Adjust this before final tightening.
  4. Байланыш: Connect the valve to the radiator and the heating pipes using appropriate sealing materials. The valve features a standard 50 mm connection.
  5. Катуулоо: Secure all connections firmly but avoid over-tightening, which can damage threads or seals.
  6. System Refill and Test: After installation, refill the heating system, bleed air from the radiator, and check all connections for leaks.

Refer to your radiator and heating system manuals for specific connection requirements and safety guidelines.

Иштөө нускамалары

The Buderus Logafix Universal Radiator Valve allows you to control the heat output of your radiator, contributing to energy efficiency and comfort.

Allow time for the room temperature to stabilize after adjusting the valve setting.

Техникалык тейлөө

Regular maintenance ensures the longevity and efficient operation of your radiator valve.

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
Радиатор жылыбай жатат.Valve is closed or stuck. Air in the radiator.Turn the thermostatic head to a higher setting. Rotate the head through its full range of motion. Bleed the radiator.
Radiator is too hot, even on low setting.Valve not closing completely.Ensure the thermostatic head is correctly seated. Rotate the head through its full range of motion to free the valve pin. If problem persists, professional inspection may be needed.
Water leak at connections.Loose connection or faulty seal.Depressurize the system. Carefully tighten the connection. If leak persists, replace the seal or contact a professional.

Техникалык шарттар

АтрибутДеталь
ӨндүрүүчүBuderus
Модель номери7738324180
Продукциянын өлчөмдөрү22.2 x 14 x 5.8 см
Элемент Салмагы580 грамм
Туташуу түрүUniversal (Angle or Straight-through)
Туташуу өлчөмүСтандарттык 50 мм
Системанын шайкештигиStandard 2-tube heating systems
БүтүрүүChrome
Батареялар талап кылынатЖок

Кепилдик жана колдоо

Information regarding specific warranty terms and conditions for the Buderus Logafix Universal Bathroom Radiator Valve Kit is not available in the provided product data. For warranty claims or technical support, please contact Buderus directly or refer to the documentation provided at the time of purchase.

Өндүрүүчү: Buderus

Модель номери: 7738324180