BONTEC Single Arm Monitor Mount User Manual

1. Киришүү

Thank you for choosing the BONTEC Single Arm Monitor Mount. This product is designed to enhance your workspace by providing a stable, adjustable, and ergonomic solution for your monitor. It helps free up valuable desk space and allows for flexible screen positioning to reduce neck and back strain.

2. Коопсуздук маалыматы

Монтаждоо жана колдонуудан мурун бардык нускамаларды кунт коюп окуп чыгыңыз.
Ensure your monitor's weight and VESA pattern are within the specified limits (max 10 kg, VESA 75x75mm or 100x100mm).
Бурамаларды өтө катуу тартпаңыз, анткени бул зыян келтириши мүмкүн.
кичинекей бөлүктөрүн балдардан алыс кармаңыз.
Эгерде кандайдыр бир бөлүктөрү жок же бузулуп калса, дароо кардарларды колдоо менен байланышыңыз.

3. Пакеттин мазмуну

Монтаждоону баштоодон мурун бардык компоненттердин бар экендигин текшериңиз:

Монитор курал ассамблеясы
Desk Clamp Компонент
Тырмакчанын негизинин компоненти
Орнотуу жабдуулары (бурамалар, шайбалар, аралыктар)
Allen Keys (Hex Wrenches)
Кабелдик башкаруу клиптери
Instruction Manual

4. Орнотуу жана орнотуу

The BONTEC monitor mount offers two primary installation methods: Desk Clamp and Grommet Base. Choose the method that best suits your desk setup.

4.1. Desk Clamp Орнотуу

Бул ыкма 10 ммден 85 ммге чейинки калыңдыктагы столдор үчүн ылайыктуу.

C-cl тиркеңизamp столуңуздун четине коюңуз.amp is securely tightened to provide maximum stability.
Негизги устунду клапанга салыңызamp base and secure it with the provided screw.
Slide the monitor arm onto the pole at your desired height and tighten the adjustment screw.

4.2. Grommet Base Installation

This method is suitable for desks with a pre-existing bolt hole (diameter 10mm to 85mm) and desk thicknesses between 10mm and 80mm.

C-clди демонтаждооamp to use the grommet base components.
Insert the grommet bolt through the desk hole.
Secure the grommet base from underneath the desk using the provided washer and nut.
Insert the main pole into the grommet base and secure it.
Slide the monitor arm onto the pole at your desired height and tighten the adjustment screw.

Two installation methods: Desk Clamp жана Grommet базасы — Figure 1: Illustration of the two available installation methods: Desk Clamp and Grommet Base. The Desk Clamp supports desk thicknesses from 10mm to 85mm. The Grommet Base supports desk thicknesses from 10mm to 80mm with a hole diameter from 10mm to 85mm.

4.3. Мониторду орнотуу

This mount is compatible with monitors between 13 and 32 inches, with VESA mounting patterns of 75x75mm or 100x100mm, and weighing up to 10 kg.

Carefully align your monitor's VESA holes with the mounting plate on the arm.
Secure the monitor to the plate using the appropriate screws provided. Ensure they are tightened firmly but do not overtighten.

Monitor mounted on the BONTEC arm, showing screen size compatibility and weight capacity — Figure 2: A monitor securely mounted on the BONTEC arm, demonstrating compatibility with screens from 13 to 32 inches and a maximum capacity of 10 kg. The image also highlights VESA compatibility for 75x75mm and 100x100mm patterns.

5. Пайдалануу боюнча нускамалар жана жөндөөлөр

The BONTEC monitor mount offers a range of adjustments for optimal viewсооронуч.

5.1. Бийиктигин тууралоо

To adjust the monitor's height, loosen the screw on the pole collar, slide the arm to the desired position, and then re-tighten the screw firmly.

Adjustable height feature of the monitor arm, showing a range of 430mm — Figure 3: The monitor arm's adjustable height feature, illustrating the vertical movement range of up to 430mm along the main pole.

5.2. жантайып тууралоо

The monitor can be tilted up or down to reduce glare and optimize viewing angles. Loosen the tilt screw on the VESA plate, adjust the angle, and then re-tighten.

Full motion adjustment showing tilt and rotation capabilities — Figure 4: Demonstrates the full motion adjustment capabilities, including a tilt range of ±90° and 360° rotation for portrait or landscape orientation.

5.3. Swivel and Rotation

The arm allows for 180-degree swivel at multiple joints, and the VESA plate can rotate 360 degrees, enabling easy switching between landscape and portrait orientations.

Angle adjustment illustration showing 180 degree swivel at arm joints — Figure 5: An illustration detailing the angle adjustment, showing the arm's ability to swivel 180° at its joints for flexible positioning.

5.4. Кабелдик башкаруу

Utilize the integrated cable management clips along the arm to route and organize your power and AV cables, keeping your workspace neat and clutter-free.

Multiple features including integrated cable management and Allen key storage — Figure 6: Highlights multiple features of the monitor arm, including the integrated cable management system to keep wires organized and a convenient storage slot for the included Allen keys on the main pole.

6. Техникалык тейлөө

Бардык бурамалар менен байланыштарды дайыма текшерип туруңуз, алар бекем жана коопсуз бойдон калууда.
Орноткучту жумшак, d менен тазалаңызamp кездеме. Абразивдүү тазалагычтардан же эриткичтерден качыңыз.
Do not lubricate any parts of the mount unless specifically instructed.

7. Кыйынчылыктарды

Көйгөй	Мүмкүн себеп	Чечим
Monitor is wobbly or unstable.	Mounting screws are loose; desk clamp/grommet base is not tight enough; monitor weight exceeds limit.	Ensure all screws are tightened. Re-tighten the desk clamp or grommet base. Verify monitor weight is within 10 kg.
Колдун кыймылын тууралоо кыйынчылыгы.	Муундар өтө катуу.	Use the provided Allen keys to slightly loosen the screws at the arm joints until desired movement is achieved.
VESA plate does not align with monitor holes.	Incorrect VESA pattern; plate installed backward.	Verify your monitor's VESA pattern (75x75mm or 100x100mm). Ensure the VESA plate is oriented correctly as per instructions.

8. Техникалык шарттар

Бренд: BONTEC
Түсү: Кара
Шайкеш түзмөктөр: Monitors (LCD, LED)
Экрандын өлчөмү шайкештиги: 13-32 inches (33-81cm diagonal)
VESA шайкештиги: 75x75мм, 100x100мм
Монтаж түрү: Desk Mount (Clamp же Громмет)
Өзгөчө өзгөчөлүгү: Adjustable (Height, Tilt, Swivel, Rotation)
Материал: Эритме болот
Элементтин өлчөмдөрү (L x W x Y): 39 x 7.5 x 43 сантиметр
Салмак чеги: 10 килограмм
Сууга туруктуулук деңгээли: Сууга чыдамдуу эмес

9. Кепилдик жана колдоо

BONTEC is committed to providing high-quality products and excellent customer service. This product is backed by technical support to assist you with any questions or concerns you may have during assembly or use.

For technical assistance or warranty inquiries, please refer to the contact information provided with your purchase or visit the official BONTEC webсайт.