1. Продукт бүтүп калдыview
The MISTRAL CUT MOVE.006 is a professional cordless hair clipper designed for efficient and precise hair trimming. It features an 8-hour battery autonomy and a super silent comb system for a comfortable user experience. This device is suitable for various grooming needs, including beard, mustache, nose, ear, and body hair trimming, as well as dry shaving.
2. Коопсуздук боюнча маанилүү маалымат
Сураныч, шайманды колдонуудан мурун бардык коопсуздук нускамаларын кылдат окуп чыгыңыз.
- Do not use the clipper on eyes, sensitive skin areas, or other delicate body parts.
- Шайманды балдар жетпеген жерде сактаңыз.
- Do not immerse the clipper or charger in water or other liquids. Keep away from water sources.
- Шайманды колдонбогондо кургак жерде сактаңыз.
- Always follow the recommended cleaning and maintenance instructions to ensure safe operation and longevity of the device.
- Ensure the appliance is fully charged before initial use.
3. Пакеттин мазмуну
Пакетте бардык буюмдар бар экенин текшериңиз:
- MISTRAL CUT MOVE.006 Hair Clipper
- Charging Cable / Power Adapter
- Comb Guides (3mm, 6mm, 9mm)
- Тазалоочу щетка
- Майлоочу май
Image 1: Contents of the MISTRAL CUT MOVE.006 package, including the clipper, charger, three comb guides, a small cleaning brush, and a bottle of lubricating oil.
4. Орнотуу
4.1. Аппаратты заряддоо
Before first use, fully discharge the battery, then charge it completely.
- Клиппердин өчүрүлгөнүн текшериңиз.
- Connect the charging cable to the clipper's charging port.
- Plug the power adapter into a suitable electrical outlet (100-240V, 50/60Hz).
- Кубаттоо көрсөткүчү күйөт. Толук кубаттоо болжол менен 8 саатты талап кылат.
- Once fully charged, disconnect the charger from the outlet and the clipper.
4.2. Тарак багыттагычтарын бекитүү
Select the desired comb guide for your preferred hair length.
- Клиппердин өчүрүлгөнүн текшериңиз.
- Align the comb guide with the clipper blade.
- Gently push the comb guide onto the blade until it clicks securely into place.
- To remove, gently pull the comb guide away from the blade.
5. Иштөө нускамалары
5.1. Жалпы колдонуу
- Ensure the clipper is fully charged. The working time on a full charge is approximately 80 minutes.
- Attach the desired comb guide (3mm, 6mm, or 9mm) if you wish to trim hair to a specific length. For a very close cut (0.1-0.3mm), use without a comb guide.
- Switch on the clipper using the power button.
- Hold the clipper with the blade flat against the skin and move it slowly against the direction of hair growth.
- After use, switch off the clipper.
5.2. Hair Length Adjustment
The MISTRAL CUT MOVE.006 comes with three comb guides to achieve different hair lengths:
- 3mm Comb Guide: For short trims.
- 6mm Comb Guide: For medium-short trims.
- 9mm Comb Guide: For longer trims.
For a very close cut, ranging from 0.1mm to 0.3mm, operate the clipper without any comb guide attached.
6. Техникалык тейлөө жана тазалоо
Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your clipper.
6.1. Бычактарды тазалоо
- Ensure the clipper is switched off and disconnected from the power source.
- Бардык тиркелген тарак жетектерин алып салыңыз.
- Use the provided cleaning brush to remove loose hairs from the blades and the clipper head.
- For thorough cleaning, the blade set can be carefully detached (refer to specific instructions if provided in a physical manual, otherwise proceed with caution).
- Do not rinse the clipper under water unless explicitly stated as waterproof.
6.2. Майлоо
After every few uses, or if the blades feel sluggish, apply a small amount of the provided lubricating oil to the blades.
- Ensure the clipper is clean and dry.
- Apply 1-2 drops of lubricating oil evenly across the blade teeth.
- Switch on the clipper for a few seconds to distribute the oil.
- Ашыкча майды жумшак чүпүрөк менен сүртүңүз.
6.3. Сактоо
Чач кыркуучу машинаны кургак, салкын жерде, күн нуру түз тийбеген жана нымдуулуктан алыс сактаңыз. Балдар жетпеген жерде сактаңыз.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Clipper күйбөйт. | Батарея заряды түгөнгөн. | Чач кыркуучу машинаны 8 саатка заряддаңыз. |
| Клиппер жай чуркайт же чачты тартат. | Бышактар кир же майланбаган. | Чачтарды тазалап, майлоочу май сүйкөңүз. |
| Clipper адаттан тыш ызы-чуу чыгарат. | Blades may be misaligned or dirty. | Clean and lubricate blades. If issue persists, contact support. |
| Батареянын иштөө мөөнөтү күтүлгөндөн кыска. | Батарея толук заряддала элек же эскирип калган. | Ensure full 8-hour charge. If battery is old, consider replacement if available. |
8. Техникалык шарттар
- Модел: MOVE.006
- Бренд: MISTRAL
- Өлчөмдөрү: 143.7 x 34.5 мм
- Тtage: 100-240V, 50/60 Гц
- Output Voltage: 5V / 600 мА
- Батарея: 2000mAh / Ni-Mh / 2.4V
- Күч: 5W
- Заряддоо убактысы: 8 саат
- Иш убактысы: 80 мүнөт
- Бышактын материалы: Stainless Iron
- Haircutting Length: 0.1-0.3 mm (without comb guide)
- Кубат булагы: Батарея менен иштейт (зымсыз)
- Өзгөчө өзгөчөлүгү: Super Silent Comb System
- Сунушталган колдонуулар: Beard trimming, mustache trimming, nose and ear hair trimming, body hair trimming, dry shaving.
- Камтылган аксессуарлар: 3mm, 6mm, 9mm comb guides, cleaning brush, lubricating oil.
Image 2: Back of the MISTRAL CUT MOVE.006 product box, displaying detailed technical specifications and features in multiple languages.
9. Кепилдик жана колдоо
For information regarding warranty coverage, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or inquiries, please reach out to the manufacturer, MISTRAL, through their official support channels.