NEWTRY S/N:20002 Miniature Shear Brake and Manual Bending Machine User Manual

1. Коопсуздук нускамалары

Read all instructions carefully before operating the machine. Failure to follow safety guidelines may result in injury or damage to the equipment.

• Ар дайым тиешелүү жеке коргонуу шаймандарын (ЖКК), анын ичинде коргоочу көз айнектерди жана кол каптарды кийиңиз.
• Ensure the machine is securely mounted or placed on a stable, level surface before use.
• Keep hands and fingers clear of moving parts, especially the shear blade and bending dies, during operation.
• Do not exceed the machine's specified material capacities.
• Жумушчу жерди таза жана жакшы жарыктандырыңыз.
• Эгерде бөлүктөрү бузулуп же жок болсо, машинаны иштетпеңиз.
• Балдарды жана уруксаты жок адамдарды машинадан алыс кармаңыз.

2. Продукт бүтүп калдыview

The NEWTRY S/N:20002 Miniature Shear Brake is a versatile manual tool designed for both shearing and bending various sheet materials. Its compact size makes it suitable for small-scale fabrication, prototyping, and hobbyist projects. This machine allows for precise cuts and bends in materials such as aluminum, copper, circuit boards, and brass within specified thickness limits.

2.1-сүрөт: алдыңкы жагы view of the NEWTRY S/N:20002 Miniature Shear Brake.

3. Техникалык шарттар

Материалдык сыйымдуулук

4. Орнотуу

1. Таңгактан чыгаруу жана текшерүү: Carefully remove the machine from its packaging. Inspect all components for any signs of damage during transit. Report any damage to the supplier immediately.
2. Жайгашкан жери: Place the shear brake on a sturdy, level workbench or table capable of supporting its weight (16 KGS). Ensure there is adequate space around the machine for safe operation and material handling.
3. Component Assembly (if required): The main handle may need to be attached. Secure it firmly using the provided hardware. Ensure all bolts and fasteners are tightened before use.

Figure 4.1: ашыкview of machine components and setup.

5. Операция

5.1 Shearing Operation

1. Материалды даярдоо: Ensure the material to be cut is clean, flat, and within the specified thickness capacity.
2. Позиция материалы: Lift the shear handle. Carefully slide the material under the shear blade, aligning the desired cut line with the blade's edge.
3. Cut аткаруу: Firmly and smoothly pull down the shear handle to cut the material. Ensure your hands are clear of the blade path.
4. Remove Material: Lift the handle and remove the cut material.

Figure 5.1: Demonstrating the shearing process.

5.2 Bending Operation

1. Материалды даярдоо: Ensure the material is clean, flat, and within the specified thickness capacity.
2. Adjust Bending Dies: Depending on the desired bend angle and material thickness, adjust the bending dies. Refer to the machine's markings or trial and error for optimal settings.
3. Позиция материалы: Place the material between the bending dies, aligning the bend line with the edge of the upper die.
4. Execute Bend: Apply steady, even pressure to the bending handle to form the desired angle. Release the handle once the bend is complete.
5. Remove Material: Carefully remove the bent material.

Figure 5.2: Demonstrating the bending process.

Figure 5.3: Close-up of the bending dies and material.

6. Техникалык тейлөө

• Тазалоо: After each use, clean the machine to remove any metal shavings or debris. Use a brush or compressed air. Do not use harsh chemicals that may damage the finish.
• Майлоо: Periodically apply a light machine oil to all pivot points and moving parts to ensure smooth operation and prevent rust.
• Бычак текшерүү: Regularly inspect the shear blade and bending dies for wear, nicks, or damage. Dull blades can lead to poor cuts and require more force. Replace worn components as necessary.
• Сактагыч: Store the machine in a dry, clean environment to prevent corrosion.

7. Кыйынчылыктарды

• Uneven Cuts or Rough Edges:
  Мүмкүн болгон себеп: Dull shear blade, incorrect material positioning, or material exceeding capacity.
  Чечим: Inspect and sharpen/replace blade. Ensure material is properly aligned. Verify material thickness is within specifications.
• Difficulty Bending Material:
  Мүмкүн болгон себеп: Material too thick, incorrect die adjustment, or insufficient force.
  Чечим: Check material thickness against capacity. Adjust bending dies. Apply more consistent force.
• Машина туруктуу эмес:
  Мүмкүн болгон себеп: Not placed on a level surface, or mounting bolts are loose.
  Чечим: Relocate to a stable, level surface. Tighten all mounting bolts.
• Squeaking or Sticking Parts:
  Мүмкүн болгон себеп: Lack of lubrication or accumulation of debris.
  Чечим: Clean the machine thoroughly and apply lubricant to all moving parts.

8. Кепилдик жана колдоо

For warranty information, technical support, or to order replacement parts, please contact NEWTRY customer service. Refer to your purchase documentation for specific contact details or visit the official NEWTRY webсайт.