VOX BC108 Black Cab Series Ampкөтөргүч кабинет

1. Киришүү

The VOX BC108 Black Cab Series Amplifier Cabinet is a compact and portable speaker cabinet designed to deliver quality sound for guitar amplification. Featuring an 8-inch speaker and 25 Watts of power handling, it is ideal for practice, studio use, and small venues. This manual provides essential information for the safe and effective use of your BC108 cabinet, ensuring optimal performance and longevity.

Сүрөт 1: Алдыңкы view of the VOX BC108 Amplifier Cabinet.

2. Коопсуздук чаралары

To prevent electric shock, fire, or damage to the unit, please read and follow all instructions carefully.

• Кубат булагы: This cabinet is passive and does not require direct power. Ensure any connected amplifier is properly grounded and uses the correct voltage.
• Вентиляция: Do not block any ventilation openings. Ensure adequate airflow around the cabinet.
• Суу жана ным: Агрегатты жамгырга, нымдуулукка же ашыкча нымдуулукка дуушар кылбаңыз. Суюктукка толгон нерселерди аппараттын үстүнө же жанына койбоңуз.
• Жылуулук: Аппаратты радиаторлор, жылуулук регистрлери, мештер же жылуулук чыгарган башка аппараттар сыяктуу жылуулук булактарынан алыс кармаңыз.
• Тазалоо: Кургак чүпүрөк менен гана тазалаңыз. суюк тазалагычтар же аэрозолдук тазалагычтар колдонгон жок.
• Тейлөө: Бул продуктту өзүңүз тейлөөгө аракет кылбаңыз. Бардык тейлөөнү квалификациялуу тейлөө кызматкерлерине тапшырыңыз.
• Жайгашкан жери: Place the cabinet on a stable, level surface to prevent it from falling.
• Динамик кабельдер: Use high-quality speaker cables with appropriate gauge for connections to prevent signal loss or damage.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• VOX BC108 Ampкөтөргүч кабинет
• Speaker Cable (may vary by region/retailer)
• Көрсөтмө (бул документ)

4. Орнотуу

Follow these steps to set up your VOX BC108 amplifier cabinet:

1. Жайгашкан жери: Position the BC108 cabinet on a stable surface. For optimal sound projection, consider placing it on the floor or on a sturdy stand.
2. а туташуу Amplifier Head:

   Locate the speaker output jack on your amplifier head and one of the input jacks on the rear of the BC108 cabinet. Use a high-quality speaker cable to connect these two points. Ensure both the amplifier and the cabinet are powered off before making connections.

   

   Figure 2: The BC108 cabinet paired with an MV50 ampкөтөргүч баш.

   

   Figure 3: Rear panel of the BC108, illustrating the parallel speaker jacks.

3. Импеданстын дал келиши: The BC108 has an impedance of 8 Ohms. Ensure your amplifier head's output impedance setting matches or is compatible with the cabinet's impedance to prevent damage to your ampөмүрлүү.
4. Parallel Speaker Jacks: The BC108 features two parallel speaker jacks. One jack serves as the input from your amplifier, and the other can be used to connect an additional speaker cabinet in parallel. When connecting two 8-Ohm cabinets in parallel, the total impedance presented to the amplifier will be 4 Ohms. Ensure your amplifier can safely operate at this lower impedance.

5. Операция

The BC108 is a passive speaker cabinet and its operation is directly controlled by the connected ampкөтөргүч баш.

• Күйгүзүү/өчүрүү: Өзүңүздү күйгүзүңүз amplifier head after all connections are securely made. Turn off the amplifier head before disconnecting any cables.
• Үндү көзөмөлдөө: Adjust the volume and tone settings directly on your ampкөтөргүч баш.
• Daisy-Chaining (Connecting Multiple Cabinets): If you wish to connect a second 8-Ohm cabinet, use a speaker cable to connect the second parallel jack on the BC108 to the input of the additional cabinet. Remember that this configuration will result in a 4-Ohm load for your ampөмүрлүү.


Figure 4: Two BC108 cabinets stacked, demonstrating a potential multi-cabinet setup.

6. Техникалык тейлөө

Proper maintenance ensures the longevity and performance of your BC108 cabinet.

• Тазалоо: Wipe the exterior of the cabinet with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish.
• Сактагыч: When not in use for extended periods, store the cabinet in a dry, temperature-controlled environment, away from direct sunlight and extreme temperatures.
• Текшерүү: Periodically check speaker cables for any signs of wear or damage. Replace damaged cables immediately.

7. Кыйынчылыктарды

If you encounter issues with your BC108 cabinet, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact VOX customer support or a qualified service technician.

8. Техникалык шарттар

9. Кепилдик маалыматы

The VOX BC108 Amplifier Cabinet comes with a 1 жылдык чектелген кепилдик from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, unauthorized repair, or normal wear and tear.

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VOX webсайт.

10. Кардарларды колдоо кызматы

If you have any questions, require technical assistance, or need to arrange for service, please contact VOX customer support:

• Webсайт: Visit the official VOX webКөп берилүүчү суроолор, колдоо ресурстары жана байланыш маалыматы үчүн сайт.
• Байланыш: Refer to the contact section on the VOX webтелефон номерлери же электрондук почта колдоо сайты.
• Дилер: Contact your authorized VOX dealer for local support and service options.