1. Продукт бүтүп калдыview
The Jamar Hand Dynamometer is a precision instrument designed for accurately measuring isometric grip strength. It is widely used in clinical settings, rehabilitation, and research to assess hand and forearm strength. This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your Jamar Hand Dynamometer to ensure reliable and consistent measurements.
Сүрөт 1: Алдыңкы view of the Jamar Hand Dynamometer, showing the display and control buttons.
2. Орнотуу жана чогултуу
Before first use, ensure all components are present and inspect the device for any visible damage. The Jamar Hand Dynamometer typically comes pre-assembled, but proper handling and initial checks are crucial.
2.1 Пакеттен чыгаруу
- Carefully remove the dynamometer from its packaging.
- Verify that the device is intact and free from any shipping damage.
- Түпнуска таңгагын келечекте сактоо же ташуу үчүн сактаңыз.
Figure 2: The Jamar Hand Dynamometer stored within its protective carrying case.
2.2 Тутканы тууралоо
The dynamometer features an adjustable handle to accommodate various hand sizes. To adjust the handle position:
- Динамометрдин капталынан жөндөө механизмин табыңыз.
- Adjust the handle to one of the five available positions to ensure a comfortable and secure grip for the user.
- Ensure the handle is securely locked in place before proceeding with measurements.
3. Иштөө нускамалары
Follow these steps for accurate grip strength measurement using the Jamar Hand Dynamometer.
3.1 Күйгүзүү/өчүрүү
- басыңыз КҮЙГҮЗҮҮ/ӨЧҮРҮҮ button to turn the device on. The display will illuminate.
- Аппаратты өчүрүү үчүн басып, кармап туруңуз КҮЙГҮЗҮҮ/ӨЧҮРҮҮ button until the display turns off. The device may also have an auto-off feature to conserve battery.
3.2 Ченөө
- Ensure the device is powered on and the display shows "0.0" or is ready for a new measurement. If not, press the RESET баскычы.
- Instruct the user to grip the dynamometer handle firmly. Ensure their hand is positioned correctly, with the base of the fingers aligned with the handle.
- Have the user squeeze the handle with maximum effort. The peak force will be displayed on the screen.
- Record the measurement.
- To clear the current reading and prepare for the next measurement, press the RESET баскычы.
Figure 3: Proper technique for holding and operating the Jamar Hand Dynamometer during a grip strength test.
3.3 Using Advanced Features (if applicable)
- SELECT/TEST: This button may be used to cycle through different test modes or to confirm selections. Refer to the on-screen prompts.
- AVG/CLEAR: This button typically allows you to view the average of multiple readings or to clear stored data. Consult the device's display for specific functions.
4. Техникалык тейлөө
Proper maintenance ensures the longevity and accuracy of your Jamar Hand Dynamometer.
4.1 Тазалоо
- Wipe the exterior of the dynamometer with a soft, damp кездеме.
- Use a mild disinfectant solution if necessary, but avoid harsh chemicals or abrasive cleaners.
- Аппаратты сууга же башка суюктукка салбаңыз.
- Сактоодон мурун, түзмөк толугу менен кургак экенине ынаныңыз.
4.2 Сактоо
- Store the dynamometer in its protective carrying case when not in use.
- Аппаратты салкын, кургак жерде, тике күндүн нурунан жана экстремалдык температурадан алыс сактаңыз.
4.3 Калибрлөө
For optimal accuracy, it is recommended to have your Jamar Hand Dynamometer calibrated periodically by a qualified service technician. Consult the manufacturer's guidelines or contact customer support for recommended calibration intervals.
5. Кыйынчылыктарды
If you encounter issues with your Jamar Hand Dynamometer, refer to the following common problems and solutions.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Түзмөк күйбөй жатат. | Төмөн же өлүп калган батарейкалар. | Replace batteries (if applicable). Ensure correct battery orientation. |
| Туура эмес же дал келбеген окуулар. | Improper grip technique; Device needs calibration; Environmental factors. | Ensure proper grip. Consider professional calibration. Use in a stable environment. |
| Дисплей ката жөнүндө билдирүүнү көрсөтөт. | Internal malfunction; Overload. | Turn off and restart the device. If error persists, contact customer support. Avoid exceeding maximum capacity. |
If the problem persists after attempting these solutions, please contact Jamar customer support for further assistance.
6. Техникалык шарттар
Key technical specifications for the Jamar Hand Dynamometer Model 51731.
- Модель номери: 51731
- Өлчөмдөрү: 30.48 x 38.1 x 12.7 см (12 x 15 x 5 дюйм)
- Салмагы: 1.94 кг (4.28 фунт)
- Өндүрүүчү: Жамар
- ASIN: B06WW9JM3V
- Биринчи жеткиликтүү датасы: 24-апрель, 2013-жыл
4-сүрөт: Өлчөмдүүview of the Jamar Hand Dynamometer.
7. Кепилдик жана колдоо
Jamar products are known for their quality and reliability. Most Jamar products, including this hand dynamometer, are designed for both home and clinical use and often come with a lifetime warranty.
7.1 Кепилдик маалыматы
The manufacturer, Jamar, typically offers a lifetime warranty on many of its products. Please refer to the warranty card included with your purchase or visit the official Jamar website for specific terms and conditions regarding your Model 51731 Hand Dynamometer.
7.2 Кардарларды колдоо
For technical assistance, calibration services, or any inquiries regarding your Jamar Hand Dynamometer, please contact Jamar customer support. You can usually find contact information on the manufacturer's official webсайт же продукт сатылып алынган сатуучу аркылуу.
Эскертүү: Always provide your model number (51731) and ASIN (B06WW9JM3V) when contacting support to expedite assistance.