VIVOHOME VH012 Scissor Motorcycle Lift Instruction Manual

1. Коопсуздук боюнча маанилүү маалымат

Read and understand all instructions before using this product. Failure to follow all instructions listed below may result in serious injury.

• Always operate the lift on a flat, level, and stable surface.
• Ensure the motorcycle or ATV is centered and stable on the lift platform before raising.
• 500 кг (1100 фунт) максималдуу салмактан ашпаңыз.
• Keep hands and feet clear of the scissor mechanism during operation.
• Never work under a vehicle supported only by the lift. Use additional support stands.
• Ар бир колдонуудан мурун лифттин бузулгандыгын же эскиргендигин текшериңиз. Бузулган болсо, колдонбоңуз.
• Балдарды жана жанында жүргөндөрдү жумуш аймагынан алыс кармаңыз.
• Тиешелүү жеке коргонуу шаймандарын (ЖКК) кийиңиз.

2. Продукт бүтүп калдыview

The VIVOHOME VH012 Scissor Motorcycle Lift is designed for safely raising motorcycles, ATVs, and UTVs for maintenance and repair. It features a robust steel construction and a user-friendly crank handle mechanism.

Негизги өзгөчөлүктөрү:

• Оор жүк ташуучу болот конструкциялары: Durable frame with red and black powder-coated finish for oil, grease, and rust resistance.
• Тайгаланбаган платформа: Large top platform (37 cm x 23 cm) with a durable rubber pad and striped pattern to prevent slippage and scratches.
• Crank Handle Operation: Easy-to-use crank handle with two removable screw adapters for efficient lifting and lowering.
• Кеңири колдонуу: Suitable for most motorcycle models, including cruisers, tricycles, Can-Am Spyders, ATVs, UTVs, dirt bikes, and snowmobiles.
• Компакт дизайн: Space-saving and portable for storage in garages or workshops.

Image 2.1: The VIVOHOME Scissor Motorcycle Lift supporting a motorcycle, highlighting its lifting capacity and range.

3. Техникалык шарттар

Image 3.1: Detailed dimensions and specifications of the lift.

4. Орнотуу

Before using the VIVOHOME Scissor Motorcycle Lift, ensure proper setup to guarantee safety and optimal performance.

1. Компоненттерди таңгактан чыгаруу: Бардык бөлүктөрүн таңгактан этияттык менен алып салыңыз. Бардык компоненттердин бар экенин жана бузулбаганын текшериңиз.
2. Ылайыктуу жерди тандаңыз: Select a flat, level, and solid surface for operation. Avoid uneven ground, slopes, or soft surfaces.
3. Inspect the Lift: Before first use, and before each subsequent use, thoroughly inspect the lift for any signs of damage, loose bolts, or wear on the scissor mechanism or rubber pad. Do not use if any damage is found.
4. Position the Lift: Place the lift directly under the center of gravity of the motorcycle or ATV you intend to raise. Ensure the rubber pad on the platform will make full contact with the vehicle's frame or designated lifting points.

Image 4.1: The lift is adaptable for various motorcycle and ATV models.

5. Иштөө нускамалары

Follow these steps for safe and effective operation of your VIVOHOME Scissor Motorcycle Lift.

1. Унаанын орду: Carefully roll or drive your motorcycle/ATV onto the lift, ensuring it is centered and balanced on the rubber platform. The vehicle should be stable before lifting.
2. Engage Crank Handle: Insert the crank handle into the designated slot on the side of the lift. If needed, attach the screw adapters to the handle for better grip and leverage.
3. Унааны көтөрүү: Turn the crank handle clockwise to raise the lift platform. Observe the vehicle as it rises, ensuring it remains stable and balanced. Raise the vehicle only to the necessary height for your task, up to a maximum of 37 cm (14.5 inches).
4. Secure the Vehicle (Optional but Recommended): For extended work or added safety, use tie-down straps to secure the motorcycle/ATV to the lift or to stable anchor points in your workspace.
5. Унааны түшүрүңүз: To lower the vehicle, turn the crank handle counter-clockwise slowly and steadily. Control the descent to prevent sudden drops. Ensure the area around the lift is clear before lowering.
6. Remove Vehicle: Once the lift is fully lowered and stable, carefully remove the motorcycle/ATV from the platform.

Image 5.1: Operating the crank handle for effortless lifting.

Image 5.2: The stable wide platform with its non-slip rubber pad.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and safe operation of your VIVOHOME Scissor Motorcycle Lift.

• Тазалоо: After each use, wipe down the lift with a clean cloth to remove any oil, grease, or dirt. The powder-coated finish is designed to be resistant to these substances, making cleaning easier.
• Текшерүү: Periodically check all bolts, nuts, and moving parts for tightness and wear. Tighten any loose fasteners. Inspect the rubber pad for damage or excessive wear.
• Майлоо: Apply a light lubricant to the scissor mechanism pivot points and the crank screw thread as needed to ensure smooth operation.
• Сактагыч: Store the lift in a dry, clean area when not in use. Its compact design allows for storage in small spaces.

Image 6.1: The robust construction ensures durability and ease of maintenance.

7. Кыйынчылыктарды

This section addresses common issues you might encounter with your VIVOHOME Scissor Motorcycle Lift.

8. Кепилдик жана колдоо

For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer. VIVOHOME is committed to providing quality products and customer satisfaction.

If you require technical assistance, have questions about product operation, or need to inquire about replacement parts, please contact VIVOHOME customer support through their official webсайтка же продуктуну сатып алган сатуучуга.