Audiovox RCA WHP141B Wireless 900MHz Full-Size Headphones Instruction Manual

1. Киришүү

Thank you for choosing the Audiovox RCA WHP141B Wireless 900MHz Full-Size Headphones. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new wireless headphones. Designed for comfort and clear audio, these headphones utilize RF (Radio Frequency) technology to deliver sound wirelessly up to 150 feet from the transmitter.

Оптималдуу иштөөсүн жана коопсуздугун камсыз кылуу үчүн продуктуну колдонуудан мурун бул колдонмону кылдат окуп чыгыңыз.

2. Коопсуздук маалыматы

• Угуу коргоо: Avoid using headphones at high volume levels for extended periods to prevent hearing damage.
• Батареянын коопсуздугу: Use only the specified battery type (2 AA batteries). Do not mix old and new batteries, or different types of batteries. Dispose of used batteries responsibly.
• Тазалоо: Disconnect the transmitter from the power source before cleaning. Use a soft, dry cloth. Do not use liquid cleaners or aerosol sprays.
• Суу жана ным: Кулакчындарды же өткөргүчтү сууга же ашыкча нымдуулукка дуушар кылбаңыз.
• Вентиляция: Ensure adequate ventilation around the transmitter. Do not block ventilation openings.
• Сунуш 65 Эскертүү: Бул өнүмдүн курамында Калифорния штаты ракка жана тубаса кемтиктерге же башка репродуктивдик зыяндарга алып келүүчү химиялык заттар болушу мүмкүн.

3. Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

• Audiovox RCA WHP141B Wireless Headphones
• Wireless Transmitter / Charging Base
• AC кубат адаптери
• Audio Connection Cables (e.g., RCA to 3.5mm adapter cable)
• 2 x AA батарейкалар

Image: Complete package contents of the Audiovox RCA WHP141B Wireless Headphones.

4. Орнотуу

4.1 Өткөргүчтү орнотуу

1. Туташуу кубаты: Plug the AC power adapter into the DC IN port on the back of the wireless transmitter. Plug the other end into a standard electrical outlet.
2. Аудио булагын туташтыруу: Connect the audio connection cable from your audio source (e.g., TV, stereo system, computer) to the audio input jacks on the transmitter. Use the appropriate cable for your device (e.g., RCA cables or a 3.5mm adapter).
3. Каналды тандоо: On the back of the transmitter, select one of the three available channels (1, 2, or 3) using the channel switch. This channel must match the channel selected on your headphones.

Image: Transmitter DC IN port and channel switch.

4.2 Headphone Setup

1. Батареяларды салыңыз: Open the battery compartment on one of the headphone earcups. Insert two AA batteries, ensuring correct polarity (+/-). Close the compartment securely.
2. Күйгүзүү: Locate the ON/OFF switch on the right earcup of the headphones. Slide the switch to the "ON" position. A power indicator light should illuminate.


Image: Headphone ON/OFF switch.

3. Каналды тандоо: On the right earcup, locate the channel selection switch (CH. 1, 2, 3). Slide the switch to match the channel selected on your transmitter. This ensures proper signal reception.


Image: Headphone channel selection switch.

5. Иштөө нускамалары

5.1 Күйгүзүү/өчүрүү

• To turn on the headphones, slide the ON/OFF switch on the right earcup to the "ON" position. The power indicator light will illuminate.
• To turn off the headphones, slide the ON/OFF switch to the "OFF" position. The power indicator light will turn off.

5.2 Үндү башкаруу

• Adjust the volume using the volume control dial or buttons located on the right earcup of the headphones.
• Start with a low volume level and gradually increase it to a comfortable listening level.

5.3 Канал тандоо

• If you experience interference or static, try changing the channel on both the transmitter and the headphones to a different matching channel (1, 2, or 3).

5.4 Наушниктерди заряддоо

When the headphone batteries are low, the sound quality may degrade or the headphones may stop working. To charge:

• Ensure the transmitter is powered on and connected to its AC adapter.
• Place the headphones onto the charging base, ensuring the charging contacts align. The charging indicator light on the transmitter (if present) or headphones should illuminate to indicate charging.
• Allow sufficient time for the batteries to fully charge before use.

Image: Audiovox RCA WHP141B Wireless Headphones.

6. Техникалык тейлөө

• Тазалоо: Wipe the headphones and transmitter with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents.
• Батареяны алмаштыруу: Replace AA batteries in the headphones when they no longer hold a charge or if the power indicator does not light up. Ensure correct polarity.
• Сактагыч: When not in use for extended periods, store the headphones and transmitter in a cool, dry place. Remove batteries from the headphones if storing for several months.

7. Кыйынчылыктарды

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Audiovox webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.