Tenergy TDR RC Quadcopter Egg Drone User Manual

1. Киришүү

The Tenergy TDR RC Quadcopter Egg Drone is a compact, transformable drone designed for beginners. It features one-key stunt moves, auto-hovering capabilities, and a portable egg-shaped design for easy transport. This manual provides essential information for safe and effective operation, setup, maintenance, and troubleshooting.

Image: The Tenergy Egg Drone in its compact egg form and transformed into a quadcopter with propellers extended, illustrating its transformable design.

Image: The Tenergy Egg Drone executing a 360-degree rolling stunt, demonstrating its one-key stunt capability.

Image: The Tenergy Egg Drone demonstrating its auto-hovering feature, maintaining a stable position in the air.

Image: The Tenergy Egg Drone showcasing its portable design, fitting compactly into a shirt pocket.

2. Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:

• 1x Tenergy TDR RC Quadcopter Egg Drone
• 1x Remote Control Transmitter
• 1x USB-A to JST 2-pin Female Connector Charging Wire
• 1x Screwdriver
• 4x алмаштыруучу бычактар
• 1x Колдонуучунун колдонмосу

Сүрөт: толук view of the Tenergy Egg Drone package contents, including the drone, remote, charging cable, screwdriver, extra propellers, and manual.

3. Продукт бүтүп калдыview

3.1 Дрондун компоненттери

• Кубат баскычы: Located at the bottom of the drone. Press once to release the four blades. Press and hold to power the drone on or off.
• Заряддоо розеткасы: Located on the top of the drone, compatible with the provided USB charging wire.
• Батарея: Powered by a 3.7V 200mAh Lithium Polymer battery, visible when the drone is open.

3.2 Remote Control Transmitter Components

• Кубат которгучу: Located at the bottom center of the remote.
• Throttle Stick (Left): Бийиктикти жана айланууну башкарат.
• Elevator/Aileron Stick (Right): Алдыга/артка жана сол/оң кыймылды көзөмөлдөйт.
• Forward/Backward Trimmers: Two buttons above the power switch for fine-tuning forward/backward movement.
• Left/Right Trimmers: Two buttons to the right of the power switch for fine-tuning left/right movement.
• Башсыз режим баскычы: Activates headless mode (left bumper button).
• Auto Takeoff/Landing Button: Controls automatic takeoff and landing (right bumper button).

4. Орнотуу

4.1 Дрондун батареясын кубаттоо

1. Ensure the drone's power is off before charging.
2. Plug the JST 2-pin female connector of the charging wire into the drone's charging socket.
3. Plug the USB-A end of the charging wire into any USB-A power source (e.g., computer, USB wall adapter).
4. The red light on the USB-A connector will turn on, indicating the drone is charging.
5. Charging typically takes 40-50 minutes. The red light will turn off once the drone is fully charged.

Эскертүү: A full charge provides approximately 6-7 minutes of flying time.

Image: The Tenergy Egg Drone being charged via its Micro-USB port, connected to a laptop.

4.2 Алыстан башкаруу пульту үчүн батареяларды орнотуу

Алыстан башкарууга 2 AAA батарейкасы керек (кошумча эмес).

1. Use the included screwdriver to open the battery compartment on the back of the remote control.
2. Туура полярдуулукту (+/-) камсыз кылуу менен 2 AAA батарейкасын салыңыз.
3. Батарея отсегин жаап, аны бурама менен бекитиңиз.
4. To test, turn on the remote control. You should hear two beeps, and the LED will blink red and green, indicating it's working.

5. Иштөө нускамалары

5.1 Binding the Drone and Remote

The drone and remote must be bound every time they are powered on.

1. Press the drone's power button once to release the blades.
2. Press and hold the drone's power button until the red light starts blinking.
3. Turn on the remote control. Its LED will blink red and green.
4. Дроссельди (сол жактагы таягы) аягына чейин өйдө, андан кийин аягына чейин ылдый түртүңүз.
5. The drone's light will stop blinking, and the remote's LED will turn solid green, indicating successful binding.

5.2 Башсыз режим

Headless mode simplifies flying by eliminating the need to orient the drone. The drone will always move relative to the remote control's orientation at takeoff.

1. Before activating, position the drone so it faces the same direction as you.
2. Press the Headless Mode button (left bumper button) on the remote.
3. The drone's lights will blink red continuously to indicate it is in headless mode.
4. To exit headless mode, press the Headless Mode button again. The drone's lights will stop blinking.

5.3 Flying Tips

• Башкаруу диапазону: The drone has a control range of up to 30 feet (10 meters).
• Outdoor Flying: Avoid windy conditions, as they can significantly affect performance and control.
• Жабык имаратта учуу: Remove fragile objects like table lamps and flower vases to prevent damage in case of a crash. Turn off any electric fans to minimize interference and potential damage. Stay away from walls and ceilings, as the drone may be drawn to them if it gets too close.

Image: The Tenergy Egg Drone flying in an open outdoor space, highlighting its flexible flying options.

6. Техникалык тейлөө

• Дрон Батарея: After each flight, recharge the drone's battery to full to prevent over-discharging, which can cause irreversible damage.
• Алыстан башкаруу батареялары: If you do not plan to use the remote control for an extended period, remove the AAA batteries and store them in a cool, dry location to prevent leakage.
• Тазалоо: Дронду жана пультту тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Күчтүү химиялык заттарды же эриткичтерди колдонуудан алыс болуңуз.
• Пропеллер текшерүү: Regularly check propellers for damage. Replace any bent or broken propellers with the provided spares to ensure optimal flight performance.

7. Кыйынчылыктарды

• Drone Not Powering On/Charging: Ensure the charging cable is securely connected to both the drone and the power source. Verify the power source is active. If the drone's charging light behaves unexpectedly (e.g., turns off immediately), ensure the drone is completely off before connecting the charger.
• Байланыштыруудагы ката: Ensure both the drone and remote are fully charged. Follow the binding steps precisely, pushing the throttle stick fully up and then down. If issues persist, try rebinding in a different location to rule out interference.
• Drone Arms Not Staying Closed: Inspect the plastic tabs designed to hold the spring-loaded arms. If a tab is damaged or too small, it may not secure the arm properly.
• Difficulty Hovering/Unstable Flight: This can be common for toy quadcopters. Ensure all propellers are intact and correctly installed. Calibrate the drone before flight if possible (refer to the quick start guide for specific calibration steps if available). Use the trimmers on the remote to fine-tune stability.
• Propellers Continue Spinning After Crash: Immediately turn off the remote control and then the drone to prevent further damage or injury. This indicates a loss of signal or a control issue during impact.
• Battery Dislodges After Crashes: If the internal battery becomes loose, carefully open the drone (usually by removing screws on the lower section and releasing tabs) and re-secure the battery, possibly using double-sided tape, ensuring it does not interfere with internal components.

8. Техникалык шарттар

Image: A visual representation of the Tenergy Egg Drone's dimensions, indicating its compact size.

9. Кепилдик жана колдоо

For specific warranty information or technical support, please refer to the documentation included with your product or visit the official Tenergy website. Contact information for customer service is typically provided in the product packaging or on the manufacturer's webсайт.