PeakTech P 2800A Professional Laser Distance Meter User Manual

1. Киришүү

The PeakTech P 2800A is a professional laser distance meter designed for precise and reliable measurements in various applications, including construction, architecture, and landscaping. This device offers a measurement range from 0.05 meters to 40 meters with high accuracy. It features a multi-line backlit LCD display and quick selection keys for advanced functions such as area, volume, and Pythagorean calculations, as well as addition and subtraction. The internal memory can store up to 99 measurement values for convenient recall. An integrated 90° flip-out stop ensures accurate alignment from edges or corners, enhancing measurement precision.

2. Коопсуздук нускамалары

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in laser radiation exposure, electric shock, fire, or serious injury.

• Лазердик коопсуздук: This device uses a Class 2 laser. Do not stare directly into the laser beam or direct it at other people or reflective surfaces. Laser radiation can cause eye injury.
• Батареянын коопсуздугу: Use only specified alkaline AAA batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the device will not be used for an extended period to prevent leakage.
• Иштөө чөйрөсү: Do not operate the device in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep the device away from water and high humidity.
• Тейлөө: Do not attempt to modify or disassemble the device. Repairs should only be performed by qualified personnel.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• PeakTech P 2800A Laser Distance Meter
• Бел капчыгы
• 2 x 1.5V AAA щелочтуу батарейкалар
• User Manual (German and English)
• Калибрдөөнү ырастоо

4. Түзмөк бүттүview

Familiarize yourself with the components and controls of your PeakTech P 2800A Laser Distance Meter.

1-сүрөт: PeakTech P 2800A Laser Distance Meter front view, showing the multi-line LCD display and control buttons. This image provides a general overview of the device's layout.

2-сүрөт: PeakTech P 2800A Laser Distance Meter mounted on a mini tripod, demonstrating its tripod thread for stable and precise measurements, especially over longer distances.

3-сүрөт: Жакын план view of the integrated bubble level on the PeakTech P 2800A Laser Distance Meter, used to ensure the device is perfectly horizontal for accurate measurements.

4-сүрөт: PeakTech P 2800A Laser Distance Meter with its 90-degree flip-out stop extended, used for precise measurements from edges or corners, ensuring the measurement starts exactly from the reference point.

Key Buttons and Display Elements:

• MEAS (Red Button): Initiates measurement, confirms selections.
• OFF/CLEAR (Red Button): Powers off the device, clears current measurement/selection.
• БИРИКМЕ: Changes measurement units (m, in, ft).
• +: Addition function, navigates menus.
• -: Subtraction function, navigates menus.
• Area/Volume Button: Toggles between area and volume measurement modes.
• Pythagorean Button: Activates indirect measurement modes.
• Шилтеме чекитинин баскычы: Changes the measurement reference point (front, rear, flip-out stop).
• Эстутум баскычы: Accesses stored measurements.
• Арткы жарык баскычы: Дисплейдин арткы жарыгын которуштуруу.
• LCD дисплей: Multi-line display showing current measurements, previous results, and function icons.

5. Орнотуу

5.1 Батареяны орнотуу

1. Аппараттын артындагы батарея бөлүкчөсүнүн капкагын табыңыз.
2. Бөлүктү ачуу үчүн капкакты жылдырыңыз же ачыңыз.
3. Туура полярдуулукту (+/-) камсыз кылып, эки 1.5 В AAA щелочтуу батареяны салыңыз.
4. Батарея уясынын капкагын бекем жабыңыз.

The device will automatically power on or can be powered on by pressing the MEAS баскычы.

6. Иштөө нускамалары

6.1 Күйгүзүү/өчүрүү

• Күйгүзүү: басыңыз MEAS баскычы.
• Өчүрүү: басып, кармап туруңуз ӨЧҮРҮҮ/ТААЗ button for a few seconds, or the device will automatically power off after approximately 150 seconds of inactivity.

6.2 Өлчөө бирдиктерин өзгөртүү

басыңыз UNIT button repeatedly to cycle through the available units: meters (m), inches (in), and feet (ft).

6.3 Setting the Reference Point

The device can measure from its front edge, rear edge, or the extended 90° flip-out stop. Press the Reference Point button to switch between these options. The current reference point is indicated on the display.

6.4 Бир аралыкты өлчөө

1. Лазерди бутага багыттаңыз.
2. басыңыз MEAS Лазерди иштетүү үчүн баскычты бир жолу басыңыз.
3. басыңыз MEAS button again to take the measurement. The result will be displayed.

6.5 Үзгүлтүксүз өлчөө (Min/Max)

1. басып, кармап туруңуз MEAS button for approximately 2 seconds. The device will enter continuous measurement mode.
2. Move the device slowly to measure different points. The display will show the current, minimum, and maximum measured distances.
3. Басыңыз MEAS again to stop continuous measurement.

6.6 Аянтты өлчөө

1. басыңыз Аянт/Көлөм button once to enter area measurement mode. An icon for area will appear on the display.
2. Биринчи тарабын (мисалы, узундугун) басып өлчөңүз MEAS.
3. Экинчи тарабын (мисалы, туурасын) басып өлчөңүз MEAS.
4. Эсептелген аймак көрсөтүлөт.

6.7 Көлөмдү өлчөө

1. басыңыз Аянт/Көлөм button twice to enter volume measurement mode. An icon for volume will appear.
2. Басуу менен узундугун өлчөө MEAS.
3. Басуу менен туурасын өлчөө MEAS.
4. Баскычты басып, бийиктикти өлчөңүз MEAS.
5. Эсептелген көлөм көрсөтүлөт.

6.8 Пифагордук өлчөө (кыйыр өлчөө)

This function allows indirect measurement of heights or distances using the Pythagorean theorem. There are typically several modes (e.g., two-point, three-point). Refer to the on-screen icons for guidance.

1. басыңыз Пифагордук button to select the desired indirect measurement mode.
2. Керектүү өлчөөлөрдү жүргүзүү үчүн экрандагы көрсөтмөлөрдү аткарыңыз (мисалы, гипотенуза, база).
3. The device will calculate and display the unknown height or distance.

6.9 Кошуу жана кемитүү

After taking a measurement, you can add or subtract subsequent measurements:

1. Өлчөө алыңыз.
2. басыңыз + button for addition or - button for subtraction.
3. Take the next measurement. The result will be added to or subtracted from the previous value.
4. Керектүү түрдө кайталаңыз.

6.10 Эстутум функциясы

The device can store up to 99 measurement values.

• Дүкөн: Measurements are automatically stored.
• Эскертүү: басыңыз Эс баскычына view stored values. Use the + жана - buttons to scroll through the memory.
• Эстутумду тазалоо: Refer to the detailed user manual for specific instructions on clearing memory, as this may vary.

7. Техникалык тейлөө

• Тазалоо: жумшак колдонуу, damp cloth to clean the device. Do not use abrasive cleaners or solvents. Clean the laser lens carefully with a soft cloth, similar to cleaning camera lenses.
• Сактагыч: Store the device in its belt pouch in a cool, dry place when not in use. Remove batteries if storing for extended periods.
• Батареяны алмаштыруу: Дисплейде батарейка аз индикатору пайда болгондо батарейкаларды алмаштырыңыз.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Кепилдик жана колдоо

PeakTech products are manufactured with high quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your local PeakTech distributor. For technical support or service inquiries, please visit the official PeakTech webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз.