EVGA GeForce GTX 1080 Ti FTW3 DT Gaming Graphics Card Instruction Manual

1. Introduction and Overview

This manual provides essential information for the installation, operation, and maintenance of your EVGA GeForce GTX 1080 Ti FTW3 DT Gaming graphics card. This high-performance graphics card features EVGA iCX Technology, incorporating 9 additional thermal sensors for precise monitoring of memory and VRM components, alongside RGB LED indicators for GPU, Memory, and PWM thermal status. Its design includes a newly engineered die-cast baseplate, backplate, and optimized airflow chambers for superior cooling efficiency. Full control and customization are available through EVGA Precision XOC software.

2. Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары сиздин продукт таңгагыңызда бар экенин текшериңиз:

• EVGA GeForce GTX 1080 Ti FTW3 DT Gaming Graphics Card
• Instruction Manual
• Керектүү кабелдер

Figure 1: The retail packaging for the EVGA GeForce GTX 1080 Ti FTW3 DT Gaming graphics card.

3. Продукциянын өзгөчөлүктөрү

• Real Base Clock: 1480 МГц
• Real Boost Clock: 1582 МГц
• Memory Detail: 11264MB GDDR5X
• EVGA iCX Technology: Features 9 additional temperature sensors to monitor Memory and VRM.
• GPU/Memory/PWM Thermal Status Indicator: RGB LEDs provide visual feedback on thermal conditions.
• Муздатуу дизайны: New vented heatsink fin design and pin fins for optimized airflow.
• Коопсуздук Fuse: Integrated safety fuse protects components from damage due to improper installation or other component failures.

2-сүрөт: түз фронт view графикалык картанын, шоуasing its triple-fan cooling system and the EVGA branding.

4. Техникалык шарттар

5. Орнотуу боюнча колдонмо

5.1. Даярдоо

• Ensure your computer is powered off and disconnected from the main power source.
• Жерге туташтырылган металл буюмга тийүү менен денеңиздеги статикалык электрди чыгарыңыз.
• Кубат булагыңыздын (PSU) сунушталган кубаттуулукка жооп берерин текшериңизtage (e.g., 850W for some high-end GPUs) and has the necessary 6+2 pin or 16-pin (12VHPWR) PCIe power connectors.
• Consult your motherboard manual to identify the primary PCIe x16 slot, typically the top-most long slot, for optimal performance.
• Remove the necessary expansion slot covers from your PC case to accommodate the graphics card's display outputs.

5.2. Физикалык орнотуу

1. Carefully align the graphics card's PCIe connector with the primary PCIe x16 slot on your motherboard.
2. Gently but firmly press the card into the slot until it is fully seated. You should hear a click as the locking mechanism on the motherboard engages.
3. Secure the graphics card to the PC case using the screws from the removed expansion slot covers.

Figure 3: An angled perspective of the graphics card, showing the PCIe connector and overall design.

4-сүрөт: Арткы бөлүгү view of the graphics card, showing the protective backplate and the area where it secures to the PC case.

5.3. Power Connection

1. Locate the appropriate PCIe power cables from your power supply. The EVGA GeForce GTX 1080 Ti FTW3 DT Gaming typically requires multiple 6+2 pin connectors.
2. Connect these cables firmly into the corresponding power sockets on the graphics card. Ensure each connector is fully seated and the clips engage.

5.4. Драйверди орнотуу

1. After physical installation, connect your monitor to one of the graphics card's display outputs (DisplayPort or HDMI).
2. Компьютериңизди күйгүзүңүз.
3. Иштөө тутумуңуз жүктөлгөндөн кийин, расмий NVIDIAга өтүңүз website (nvidia.com/drivers) or EVGA's support page (evga.com/support/download) to download the latest drivers for your GeForce GTX 1080 Ti.
4. Драйверди орнотууну аяктоо үчүн экрандагы нускамаларды аткарыңыз. Системаны кайра иштетүү талап кылынышы мүмкүн.

Figure 5: A close-up of the graphics card's display output panel, featuring multiple DisplayPort and HDMI connections.

6. Иштөө нускамалары

Once drivers are installed, your EVGA GeForce GTX 1080 Ti FTW3 DT Gaming graphics card is ready for use. For optimal performance and customization, install EVGA Precision XOC software. This utility allows for fine-tuning of clock speeds, fan curves, and monitoring of the iCX thermal sensors. Ensure your operating system and games are updated to leverage the full capabilities of the graphics card.

7. Техникалык тейлөө

• Тазалоо: Periodically clean the fans and heatsink fins to prevent dust buildup, which can impede airflow and cooling performance. Use compressed air to gently remove dust. Ensure the system is powered off and unplugged before cleaning.
• Аба агымы: Maintain good airflow within your PC case by ensuring case fans are properly configured and not obstructed.
• Драйвер жаңыртуулары: Regularly check for and install the latest graphics drivers from NVIDIA or EVGA to ensure optimal performance, stability, and access to new features.

8. Кыйынчылыктарды

• Дисплей чыгышы жок:
  • Монитор кабели графикалык картага да, мониторго да бекем туташтырылганын текшериңиз.
  • Графикалык карта PCIe уячасына толугу менен орнотулганын текшериңиз.
  • Бардык керектүү PCIe кубат кабелдеринин графикалык картага туташтырылганын текшериңиз.
  • Мониторуңуз туура киргизүү булагына коюлганын текшериңиз.
• Системанын туруксуздугу/бузуулар:
  • Ensure graphics drivers are up to date.
  • Monitor GPU temperatures using software like EVGA Precision XOC to check for overheating.
  • Кубат менен камсыздоо бирдиги сунушталган ватка жооп берерин текшериңизtage for your system.
• Начар аткаруу:
  • Ensure graphics drivers are up to date.
  • Check in-game settings to ensure they are appropriate for your system configuration.
  • Керексиз фон колдонмолорун жабуу.

9. Кепилдик жана колдоо

For detailed warranty information, technical support, and additional resources, please visit the official EVGA webсайтында evga.com/support/. You may also register your product on the EVGA website to access full warranty benefits and support services.