Diversitech FP-22 Condensate Removal Pump User Manual

1. Киришүү

This manual provides essential instructions for the installation, operation, and maintenance of the Diversitech FP-22 Condensate Removal Pump. The FP-22 is designed to efficiently manage condensate water from furnaces and boilers, particularly in applications involving acidic and high-temperature conditions, up to 190°F (88°C).

Key features include a 22-foot maximum lift, steam-resistant electronics, vibration-dampening rubber feet, metal hang tabs for secure mounting, a built-in safety overflow switch, a check valve, and LED status indicators. The pump comes with four inlet holes, integrated P-traps, and 20 feet of 3/8" discharge tubing for a complete setup.

Сүрөт 1.1: алдыңкы жагы view of the Diversitech FP-22 Condensate Removal Pump. This image shows the overall design of the pump, including the red base and black motor housing.

2. Коопсуздук боюнча маанилүү маалымат

Орнотуудан жана иштетүүдөн мурун бардык көрсөтмөлөрдү кунт коюп окуп чыгыңыз. Бул көрсөтмөлөрдү аткарбоо мүлккө зыян келтирүүгө, дене жаракатына же өлүмгө алып келиши мүмкүн.

• Кандайдыр бир тейлөөнү же тейлөөнү аткаруудан мурун, ар дайым блокту электр кубатынан ажыратыңыз.
• Ensure the pump is installed by a qualified professional in accordance with local electrical and plumbing codes.
• Электр шнур же сайгыч бузулуп калса, насосту иштетпеңиз.
• This pump is designed for condensate removal only. Do not use it for flammable liquids or other applications.
• Keep hands and foreign objects away from moving parts.
• The pump is rated for 120V. Ensure the power supply matches this requirement.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• Diversitech FP-22 Condensate Removal Pump (120V)
• 20 feet of 3/8" discharge tubing
• Орнотуу жана пайдалануу боюнча колдонмо (бул документ)

4. Орнотуу боюнча нускамалар

4.1 Насосту орнотуу

The FP-22 pump can be mounted on a flat surface or suspended using the integrated metal hang tabs. For optimal noise reduction and stability, utilize the vibration-dampening rubber feet.

• Choose a stable, level location near the condensate source.
• If suspending, ensure the mounting surface is secure and can support the pump's weight when full.

Сүрөт 4.1: Каптал view of the FP-22 pump, highlighting the metal hang tabs for secure mounting.

4.2 Condensate Inlet Connection

The pump features four inlet holes with built-in "P" traps. Connect the condensate drain line from your furnace or boiler to one of these inlets.

• Ensure a tight, leak-free connection.
• The integrated P-traps prevent odors and gases from entering the system.

4.3 Чыгаруу линиясын туташтыруу

Connect the provided 3/8" discharge tubing to the pump's discharge outlet. Route the tubing to a suitable drain location, ensuring a continuous downward slope if possible, or a clear path for the pump to lift the water.

• Avoid kinks or sharp bends in the discharge tubing.
• Secure the tubing to prevent accidental dislodgement.
• The pump includes a check valve to prevent backflow.

Сүрөт 4.2: Жогорку view of the FP-22 pump, illustrating the four inlet ports and the discharge connection point.

4.4 Электрдик туташуу

Connect the pump's power cord to a dedicated 120V electrical outlet. Ensure the outlet is properly grounded and protected by a circuit breaker.

• Узарткычтарды колдонбоңуз.
• Электр менен камсыздоонун кубаттуулук деңгээли насостун көлөмүнө дал келерин текшериңизtagд талаптар.

5. Операция

The Diversitech FP-22 operates automatically. When condensate water fills the reservoir to a predetermined level, the internal float switch activates the pump, which then discharges the water through the discharge tubing. Once the water level drops, the pump deactivates.

5.1 LED көрсөткүчтөрү

The pump is equipped with LED indicators to provide status updates:

• Power LED: Насос электр кубатын алып жатканын көрсөтөт.
• LEDди иштетүү: Illuminates when the pump motor is actively running.
• Ойготкуч LED: Activates if the water level reaches the high-level safety overflow switch, indicating a potential issue.

5.2 Safety Overflow Switch

A built-in safety overflow switch provides an additional layer of protection. If the water level rises above the normal operating range, this switch will activate, typically shutting down the connected HVAC equipment to prevent overflow and water damage. Consult your HVAC system's manual for wiring instructions for this safety feature.

6. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө оптималдуу иштөөнү камсыз кылат жана конденсат насосунун иштөө мөөнөтүн узартат.

6.1 Мезгил-мезгили менен тазалоо

• Кубатты өчүрүү: Always unplug the pump from the electrical outlet before cleaning.
• Drain Reservoir: Remove any remaining water from the reservoir.
• Таза суу сактагыч: Use a mild detergent and warm water to clean the inside of the reservoir, removing any sludge or debris. Pay attention to the float switch mechanism to ensure it moves freely.
• Түтүктөрдү текшерүү: Check the inlet and discharge tubing for blockages or signs of wear.
• Кайра чогултуу: Reconnect all tubing and plug the pump back into the power outlet.

Perform this cleaning at least once every six months, or more frequently if the condensate quality is poor or the pump is in heavy use.

7. Кыйынчылыктарды

This section addresses common issues you might encounter with your FP-22 condensate pump.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information and technical support, please refer to the official Diversitech webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.

Өндүрүүчү: DiversiTech Corporation

Webсайт: www.diversitech.com (Чыгampшилтеме, чыныгы шилтеме ар кандай болушу мүмкүн)

For service or parts, please contact a qualified HVAC technician or the manufacturer directly.