PWR+ AC Adapter Instruction Manual for Booster PAC Jump Starters

1. Киришүү

This manual provides instructions for the safe and effective use of the PWR+ AC Adapter, model PWR-TAH19012N. This adapter is designed to provide power and charge compatible Booster PAC and CarStart jump starter models.

Image 1: The PWR+ AC Adapter with its integrated power cord.

2. Коопсуздук боюнча маанилүү маалымат

Read all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• UL тизмеси: This PWR+ AC Adapter is Tested, Approved, and Certified by UL/ULC (Underwriters Laboratories). The unique E475124 number is verifiable on the UL website, ensuring compliance with safety standards.
• Үй ичинде гана колдонуу: Use this adapter in dry, indoor environments only. Do not expose to rain or moisture.
• Туура желдетүү: Ensure adequate ventilation around the adapter during use. Do not cover the adapter or place it in an enclosed space.
• Зыяндан качуу: Do not use the adapter if the cord or plug is damaged. Do not attempt to open or repair the adapter.
• Орнотулган коргоолор: The adapter features Short Circuit Protection (SCP), Over Current Protection (OCP), Over Voltage Protection (OVP), and Over Temperature Protection (OTP) for enhanced safety.

Image 2: UL certification logo and a visual comparison highlighting the safety certification of the PWR+ adapter.

3. Пакеттин мазмуну

Пакет төмөнкү нерсени камтыйт:

• 1 x PWR+ AC Adapter (Model: PWR-TAH19012N)

Image 3: The PWR+ AC Adapter shown with its packaging.

4. Орнотуу нускамалары

1. Адаптерди текшерүү: Before first use, visually inspect the AC adapter and its cord for any signs of damage. Do not use if damaged.
2. Түзмөккө туташуу: Locate the charging port on your compatible Booster PAC or CarStart jump starter. Insert the barrel connector of the PWR+ AC Adapter firmly into the device's charging port.
3. Розеткага туташуу: Plug the AC adapter's two-prong plug into a standard 110-240V wall outlet. Ensure the outlet is easily accessible.

The adapter features an extra-long 6.7 ft cord for flexible placement.

5. Иштөө нускамалары

Once connected, the PWR+ AC Adapter will begin charging your Booster PAC or CarStart jump starter. The charging indicator on your jump starter will typically illuminate or change state to indicate charging status. Refer to your jump starter's manual for specific charging indicators.

• Заряддоо убактысы: Charging time varies depending on the jump starter model and its current battery level.
• Ажыратуу: Once your device is fully charged, disconnect the adapter from the wall outlet first, then from your jump starter.
• Үзгүлтүксүз туташуу: While the adapter has built-in safety features, it is generally recommended to disconnect the charger once the device is fully charged to prolong battery life.

6. Шайкештик

This PWR+ AC Adapter is compatible with a wide range of Booster PAC and CarStart jump starter models, including but not limited to:

• Күчөткүч PAC ES6000, ES5000, ES5000C, ES2500, ES2500C, ES2500KE, ES1224
• Booster PAC J850, J900, J1000, J2000 Truck Pac Charger
• Booster PAC P/N: ESA214, ESA217, ESA218, ESA22, 141-003-000, 141-004-000, 141-337-000, DC1500500, GPU48180500WDOO, GPU481801000WD00
• CarStart CS1000, CS1200 батарея күчөткүчү
• Solar ES6000, ES6000KE, ES5000SOL, ES5000ESP5500, TCB-ESA217, ESA22, ES2500KE, ES2500SOL, ES2500KE, ESA217, ES5000ESP5500, J900-SOL, ESA-22, J850 Truck Pac Battery Booster Jump Starter

Сүрөт 4: Мурункуample of a compatible device, the Booster PAC ES2500 jump starter.

7. Техникалык шарттар

Сүрөт 5: Детальдуу view of the adapter's internal cable structure and built-in safety protections.

8. Кыйынчылыктарды

• Түзмөк кубатталбай жатат:
  • Ensure the adapter is securely plugged into both the jump starter and the wall outlet.
  • Розетканын иштеп жатканын башка түзмөктү сайып текшериңиз.
  • Check if your jump starter model is listed in the compatibility section.
  • Inspect the adapter cord and connector for any visible damage.
• Адаптердин ысып кетиши:
  • Адаптер жакшы желдетилген жана жабылбаган жерде экенин текшериңиз.
  • Эгерде ысып кетүү улана берсе, колдонууну токтотуп, кардарларды тейлөө кызматына кайрылыңыз.

9. Кароо жана тейлөө

• Тазалоо: Disconnect the adapter from power before cleaning. Use a dry, soft cloth to wipe the adapter. Do not use liquid cleaners.
• Сактагыч: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use. Avoid wrapping the cord too tightly around the adapter to prevent damage.
• Колдонуу: Адаптерди түшүрүп алуудан же катуу соккуга кабылтуудан алыс болуңуз.

10. Кепилдик жана колдоо

This PWR+ AC Adapter comes with a 30 күндүк кайтаруу саясаты жана а 24 айлык алмашуу кепилдик. PWR+ is a company based in Washington, USA, committed to customer satisfaction.

For warranty claims, technical support, or any inquiries, please contact PWR+ customer service through the retailer where the product was purchased or visit the official PWR+ webсайт.