Lutron Diva Reverse-Phase (ELV) Dimmer Switch DVRP-253P-WH Instruction Manual

1. Киришүү

This manual provides instructions for the installation and operation of the Lutron Diva Reverse-Phase (ELV) Dimmer Switch, model DVRP-253P-WH. This dimmer is designed for use with 250W LED/CFL and 500W Incandescent/Halogen/ELV reverse phase applications. It features a paddle-style switch for on/off control and a slide control for adjusting light levels. A neutral wire connection is required for proper operation.

2. Коопсуздук боюнча маанилүү маалымат

• ЭСКЕРТҮҮ: Risk of Electric Shock. May result in serious injury or death. Turn off power at circuit breaker or fuse before installing.
• Бардык улуттук жана жергиликтүү электрдик кодекстерге ылайык орнотуңуз.
• Бул аппаратты квалификациялуу электрик же окутулган персонал орнотуу керек.
• Do not use with standard (forward phase) dimmers. This is a reverse-phase dimmer.
• Орнотуу үчүн нейтралдуу зым талап кылынат.
• Үй ичинде гана колдонуу үчүн.
• Иштөө температурасы диапазону: 32°F – 104°F (0°C – 40°C).

3. Кутуда эмне бар

Пакет төмөнкү компоненттерди камтыйт:

• Lutron Diva Reverse-Phase (ELV) Dimmer Switch (DVRP-253P-WH)
• Орнотуу боюнча колдонмо

Image: The Lutron Diva Reverse-Phase Dimmer Switch (DVRP-253P-WH) shown installed in a kitchen setting, demonstrating its aesthetic integration.

4. Орнотуу жана орнотуу

Before beginning installation, ensure power is turned off at the circuit breaker. This dimmer requires a neutral wire connection. If you are unsure about wiring, consult a qualified electrician.

4.1 Электр өткөргүч схемасыview

The Diva Reverse-Phase Dimmer is designed for single-pole or 3-way applications. Refer to the detailed wiring instructions provided with your dimmer switch. The dimmer connects to the line (hot), load (to light fixture), neutral, and ground wires.

Сүрөт: деталдуу view of the Lutron Diva Reverse-Phase Dimmer, highlighting its components: the paddle switch, slide control, and indicating its suitability for 3-way control of low voltage lights and fit into standard decorator-style openings.

4.2 Этап-этабы менен орнотуу

1. Кубатты өчүрүү: Locate your circuit breaker panel and turn off the power to the switch you are replacing.
2. Учурдагы которгучту алып салуу: Carefully remove the wallplate and unscrew the existing switch from the wall box. Disconnect the wires.
3. Зымдарды аныктоо: Identify the line (hot), load, neutral, and ground wires. The neutral wire is typically white.
4. Диммерди зым менен туташтырыңыз: Connect the wires from the wall box to the corresponding wires on the Lutron Diva dimmer. Ensure all connections are secure.
   • Black wire (dimmer) to Line (hot) wire (wall box)
   • Red wire (dimmer) to Load wire (to light fixture)
   • White wire (dimmer) to Neutral wire (wall box)
   • Green wire (dimmer) to Ground wire (wall box)
5. Диммерди орнотуу: Carefully push the wired dimmer into the wall box and secure it with screws.
6. Wallplate орнотуу: Attach the coordinating Claro wallplate (sold separately) over the dimmer.
7. Күчтү калыбына келтирүү: Электрди өчүргүчтөн кайра күйгүзүңүз.

For 3-way installations, refer to the specific wiring diagrams included in the product packaging. This dimmer is specifically designed for reverse-phase (ELV) loads. Using it with forward-phase loads may result in improper operation or damage.

Image: An illustration comparing Forward Phase Control, optimal for LEDs, Incandescent/Halogen, and MLV transformers, with Reverse Phase Control, which is optimal for LEDs and ELV transformers. This highlights the specific application of the Diva Reverse-Phase Dimmer.

5. Иштөө нускамалары

The Lutron Diva Reverse-Phase Dimmer offers intuitive control over your lighting.

• Жарыктарды күйгүзүү/өчүрүү: Press the large paddle switch to turn the lights on or off. When turned on, the lights will return to the previously set dimming level.
• Жарыктыкты жөндөө: Use the small slide control located next to the paddle switch to adjust the light level. Slide up to increase brightness and down to decrease brightness.
• Локатор жарыгы: A soft locator light glows in the off position, making the dimmer easy to find in the dark.

Image: The Lutron Diva Dimmer Switch integrated into a modern living room, demonstrating how it can enhance the ambiance by controlling lighting levels.

6. Техникалык тейлөө

The Lutron Diva Dimmer Switch requires minimal maintenance.

• Тазалоо: Clean the dimmer and wallplate with a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• Колдонуучу тейлей турган бөлүктөр жок: Димердин ичинде колдонуучу тейлей турган бөлүктөр жок. Аппаратты ачууга же оңдоого аракет кылбаңыз.

7. Кыйынчылыктарды

8. Техникалык шарттар

• Модел: DVRP-253P-WH
• Бренд: Lutron
• Түрү: Reverse-Phase (ELV) Dimmer Switch
• Жүктөө шайкештиги: 250W LED/CFL, 500W Incandescent/Halogen/ELV
• Тtage: 120V~ 60Hz
• Схема түрү: Бир мамычалы / 3 тараптуу
• Нейтралдуу зым: Талап кылынат
• Иштөө температурасы: 32°F – 104°F (0°C – 40°C)
• Өлчөмдөрү (L x W x Y): 4.8 x 3.12 x 4.8 дюйм
• Материал: Brass, Copper (Contact Material)
• Сертификаттар: UL Listed, IP54

9. Колдоо

For technical assistance, wiring questions, or product support, please contact Lutron's 24/7 customer support.

Lutron 24/7 Support: 844-588-7661