DieHard 71687 950 Peak Amp Jump Starter, Portable Power Source, and Air Compressor User Manual

1. Киришүү

This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your DieHard 71687 950 Peak Amp Jump Starter, Portable Power Source, and Air Compressor. This versatile unit is designed to provide emergency jump-starting power, portable 12V DC and USB power, and air compression for various inflation needs. Please read this manual thoroughly before first use and retain it for future reference.

Продукт бүттүview

Сүрөт 1: Алдыңкы view of the DieHard 71687 unit, showcasing its main controls and features including the jump start switch, internal battery status indicators, USB and 12V power ports, and the integrated air compressor hose.

The DieHard 71687 unit combines multiple functionalities into one portable device:

• 950 чокусу Amp Секирүүчү: Provides sufficient power for emergency vehicle jump-starts.
• Portable Power Source: Features a 2.1A USB power port and two 12V DC power outlets for charging and powering various electronic devices.
• 150 PSI аба компрессору: Equipped with a pressure gauge and nozzles for inflating tires, sports equipment, and other inflatables.
• Камтылган кол чырак: Жарык аз шарттарда жарыктандыруу үчүн.

Кутуда эмне бар

Таңгактан чыгаргандан кийин, төмөнкү нерселердин бардыгынын бар экенин текшериңиз:

• DieHard portable power unit with integrated cables and compressor hose
• Hose adapter end unit
• 3-piece hose adapter device end set
• Compressor accessory bag
• Колдонуучунун колдонмосу (бул документ)

2. Коопсуздук маалыматы

Read and understand all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.

• Жеке коопсуздук: Always wear eye protection and protective clothing when working with batteries. Do not touch your eyes while working near a battery.
• Вентиляция: Work in a well-ventilated area. Batteries can produce explosive gases.
• Күйүүчү материалдар: Keep sparks, flames, and smoking materials away from the unit and batteries.
• Батарея туташуу: Туташтыруу жана ажыратуу DC чыгуу clamps only after setting the jump starter switch to the OFF position.
• Бирдиктин жайгашуусу: Do not place the jump starter directly above the battery being jumped. Position the cables to prevent damage by moving engine parts.
• Балдар жана үй жаныбарлары: Агрегатты балдар жана үй жаныбарлары жетпеген жерде сактаңыз.
• Заряддоо: Recharge the unit only with the specified charger. Do not overcharge.
• Аба компрессору: Do not operate the air compressor continuously for more than 10 minutes to prevent overheating. Allow it to cool down before further use.
• Суюктук таасири: Агрегатты жамгырга же нымдуу шарттарга дуушар кылбаңыз.

3. Орнотуу жана баштапкы заряддоо

Before using your DieHard 71687 unit for the first time, it is essential to fully charge its internal battery. This ensures optimal performance and extends battery life.

Алгачкы заряддоо процедурасы

1. Ensure the unit's main power switch (if present) is in the "OFF" position.
2. Түзмөктөн AC кубаттоо портун табыңыз.
3. Plug the AC charging cable into the unit's charging port, then plug the other end into a standard 120V AC wall outlet.
4. The "CHARGE" indicator light on the control panel will illuminate, indicating that the unit is charging. Refer to the internal battery status indicators for charge level.
5. Allow the unit to charge until the "100% - 70%" indicator light is solid green, indicating a full charge. This may take several hours.
6. Once fully charged, disconnect the AC charging cable from the wall outlet and then from the unit.

Сүрөт 2: Жакын пландан view of the DieHard 71687 control panel, highlighting the "INTERNAL BATTERY STATUS" section with LED indicators for charge levels (100%-70%, 70%-30%, and below 30%). The "CHARGE" indicator is also visible.

It is recommended to fully charge the unit after each use and at least every three months to maintain battery health, even if not used.

4. Иштөө нускамалары

4.1. Унааны баштоо

Use this feature to jump-start 12V lead-acid batteries in cars, trucks, SUVs, and other vehicles.

1. Ensure the DieHard unit is fully charged.
2. Turn off the ignition of the vehicle to be jump-started and ensure all accessories (lights, radio, etc.) are off.
3. Place the DieHard unit on a flat, stable surface near the vehicle's battery, ensuring it is not directly above the battery.
4. туташтыруу КЫЗЫЛ оң (+) clamp унаанын аккумуляторунун оң (+) терминалына.
5. туташтыруу КАРА терс (-) clamp to a non-moving metal part of the vehicle's chassis, away from the battery and fuel lines. Do not connect it directly to the negative battery terminal.
6. Set the "JUMP START" switch on the DieHard unit to the "ON" position.
7. Attempt to start the vehicle. If it does not start immediately, wait a few minutes before trying again. Do not crank the engine for more than 5 seconds per attempt.
8. Once the vehicle starts, immediately set the "JUMP START" switch on the DieHard unit to the "OFF" position.
9. ажыратыңыз КАРА терс (-) clamp алгач, андан кийин электр зымынан ажыратыңыз КЫЗЫЛ оң (+) clamp.
10. Классты сактооamps securely in their designated holders on the unit.

3-сүрөт: Арткы view of the DieHard 71687 unit, showing the integrated red positive and black negative jump starter clamps, along with the air compressor hose and various inflation nozzles stored on the unit.

4.2. Using the USB and 12V DC Power Ports

The DieHard 71687 provides portable power for various electronic devices.

• USB Power Port (2.1A): Ideal for charging smartphones, tablets, and other USB-powered devices.
  1. Press the "USB ON/OFF" button to activate the USB port. The USB indicator light will illuminate.
  2. Connect your device's USB charging cable to the unit's USB port.
  3. When finished, press the "USB ON/OFF" button again to turn off the USB port.
• 12V DC Power Outlets (x2): Suitable for powering 12V DC appliances up to 36 hours, such as portable coolers, fans, or other automotive accessories.
  1. Plug your 12V DC appliance into one of the 12V DC outlets.
  2. Ensure the appliance's power switch is on (if applicable).
  3. The 12V DC outlets are always active when the unit has sufficient charge.

Figure 4: The DieHard 71687 unit positioned in a truck bed, actively charging a tablet via its USB port, demonstrating its portable power capabilities for electronic devices.

4.3. Аба компрессорун колдонуу

The integrated 150 PSI air compressor can inflate vehicle tires, bicycle tires, sports balls, and other inflatables.

1. Ensure the DieHard unit is fully charged.
2. Uncoil the air compressor hose from its storage compartment.
3. Select the appropriate nozzle adapter from the accessory bag for the item you wish to inflate. Attach it securely to the compressor hose valve.
4. Connect the hose to the item to be inflated. For tires, screw the hose valve onto the tire's valve stem.
5. Turn the "AIR COMPRESSOR" switch (if present, or main power switch) to the "ON" position.
6. Monitor the pressure gauge on the unit and inflate to the recommended pressure.
7. Once the desired pressure is reached, turn the air compressor switch to "OFF".
8. Disconnect the hose from the item and store the hose and adapters.

Figure 5: A user kneeling beside a vehicle, using the DieHard 71687 unit's integrated air compressor to inflate a car tire, demonstrating its practical application for tire maintenance.

Маанилүү: Do not operate the air compressor for more than 10 consecutive minutes. Allow it to cool for at least 10 minutes before resuming operation to prevent damage from overheating.

5. Техникалык тейлөө

Proper maintenance ensures the longevity and reliable performance of your DieHard 71687 unit.

• Толуктоо: Recharge the unit immediately after each use. If not used, recharge every three months to keep the internal battery fully charged. This prevents battery damage and extends its lifespan.
• Тазалоо: Clean the unit's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Сактагыч: Store the unit in a cool, dry place, away from direct sunlight, moisture, and corrosive materials. Ensure the jump starter clamps are securely stored in their holders to prevent accidental contact.
• Батареяны алмаштыруу: The internal sealed lead-acid AGM battery is not user-replaceable. Contact qualified service personnel for battery replacement if necessary.

6. Кыйынчылыктарды

This section addresses common issues you might encounter with your DieHard 71687 unit.

For issues not covered in this section, please refer to the Warranty and Support section for assistance.

7. Техникалык шарттар

Key technical specifications for the DieHard 71687 unit:

• Модел: 71687
• Чоку Ampкарылык: 950 Amps
• Батарея түрү: Sealed Lead-Acid AGM
• USB чыгышы: 2.1A
• DC Power Outlets: Two 12V DC outlets
• Аба компрессору: 150 PSI максимум
• Кабелдер: 8-gauge, 24-inch with color-coded clamps
• Өлчөмдөрү: Болжол менен 10.63 x 11.5 x 11.75 дюйм
• Салмагы: Болжол менен 12.3 фунт
• Өндүрүүчү: Schumacher Electric Corp.

8. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries regarding your DieHard 71687 unit, please refer to the warranty card included with your product or visit the official DieHard website. You may also contact Schumacher Electric Corp., the manufacturer, directly for assistance.

Колдоо кызматына кайрылганда моделиңиздин номерин (71687) жана сатып алуу күнүн көрсөтүңүз.