SONICAKE RockStage Multi-Effects Guitar Pedal Instruction Manual

1. Киришүү

Сатып алганыңыз үчүн рахматasing the SONICAKE RockStage Multi-Effects Guitar Pedal. This device is designed to provide essential guitar effects in a compact and user-friendly format, ideal for classic rock musicians. It integrates Distortion, Chorus, Delay, and Reverb effects, along with a built-in cabinet simulator for versatile sound routing.

2. Негизги өзгөчөлүктөрү

One-stop gig solution for classic rock players with all necessary core effects.
Analog Plexi-style distortion for 80s/90s hard rock tones.
Analog BBD-style chorus for warm, dreamy soundscapes.
500ms analog voice delay and high-quality reverb for expansive, spacy tones.
Integrated cabinet simulation for direct connection to PA systems, mixers, or audio interfaces.

3. Кутуда эмне бар

SONICAKE RockStage Multi-Effects Guitar Pedal (QCE-10)
XLR кабели
Кубат адаптери (9V DC)
User Manual

4. Орнотуу нускамалары

4.1 Кубат туташтыруу

Connect the provided 9V DC power adapter to the 'DC 9V' input jack on the pedal. Ensure the power source meets the pedal's requirements (9V DC, 20mA minimum) to prevent damage.

4.2 Аудио байланыштар

Гитара киргизүү: Connect your guitar to the 'IN' jack on the right side of the pedal using a standard 1/4-inch instrument cable.
чыгаруу үчүн Ampкөтөргүч/PA: Connect the 'OUT' jack on the left side of the pedal to your guitar amplifier's input or a PA system/mixer using a standard 1/4-inch instrument cable or the provided XLR cable if using the cabinet simulation.
Гарнитуранын чыгышы: Үнсүз машыгуу үчүн наушниктерди "PHONES" уячасына туташтырыңыз.

SONICAKE RockStage pedal with input and output jacks — Figure 1: ашыкview of the SONICAKE RockStage pedal, showing input, output, and power connections.

SONICAKE RockStage pedal connected to guitar and ampөмүрлүү — Figure 2: The RockStage pedal connected to a guitar and an amplifier, illustrating typical setup.

5. Иштөө нускамалары

The RockStage pedal features four main effects: Chorus, Rock Amp (Distortion), Delay, and Reverb. Each effect has dedicated footswitches and control knobs.

5.1 Effect Modules

SONICAKE RockStage pedal showing four effects: Chorus, Rock Amp, Delay, Reverb — Figure 3: The four main effects modules of the RockStage pedal: Chorus, Rock Amp, Delay, and Reverb.

Хор: Controls for SPEED and DEPTH to adjust the modulation intensity and rate.
Rock Amp (Distortion): Controls for VOL (Volume), TONE, and GAIN to shape the distortion character and output level.
Кечигүү: Controls for BLEND (mix), REPEAT (feedback), and TIME to set the delay parameters.
Реверб: A single MIX knob to adjust the wet/dry balance of the reverb effect.

5.2 Activating/Deactivating Effects

Each effect module has a dedicated footswitch. Press the footswitch to toggle the corresponding effect on or off. The LED indicator above each footswitch will illuminate when the effect is active.

5.3 Cabinet Simulation

The RockStage pedal includes a built-in cabinet simulator. This feature allows you to connect the pedal directly to a PA system, mixer, or audio interface without needing a traditional guitar amplifier. The 'CABINET SIM' switch (OFF/ON) is located between the Reverb and Delay modules.

SONICAKE RockStage pedal with Cabinet Sim switch highlighted — Figure 4: The Cabinet Sim switch, enabling direct connection to PA systems or audio interfaces.

5.4 LED Knobs

The control knobs for each effect feature LED backlighting, which clearly indicates the working status of the effect, especially useful in low-light stage чөйрөлөр.

SONICAKE RockStage pedal showing illuminated LED knobs — Figure 5: Illuminated LED knobs provide clear visual feedback on effect status.

5.5 Көчүрүү

The compact size and lightweight design of the RockStage pedal make it highly portable and road-ready, fitting easily into gig bags or backpacks.

SONICAKE RockStage pedal fitting into a gig bag — Figure 6: The compact design allows for easy transport and setup.

6. Техникалык шарттар

Өзгөчөлүк	Деталь
Бренд	SONICAKE
Модель аты	ТАШКАЛАРTAGE (QCE-10)
Өлчөмдөр	40л x 7л x 5.5H см
Тtage	9 вольт
Ampөчүрүү	20 миллионampere
Аудио чыгаруу эффекттери	Overdrive, Distortion, Chorus, Reverb, Delay
Башкаруу түрү	Баскыч, баскыч
Power Source	Электр зымдары
Аппараттык интерфейс	Multiple Audio
Сигнал форматы	Аналог
Туташтыргыч түрү	3.5 мм аудио джек
Келип чыккан өлкө	Кытай

7. Техникалык тейлөө

Тазалоо: Use a soft, dry cloth to clean the pedal. Avoid using abrasive cleaners or solvents.
Сактагыч: Педальды салкын, кургак жерде, күндүн түз нурунан жана өтө жогорку температурадан алыс сактаңыз.
Колдонуу: Педалды түшүрүп алуудан же катуу соккуга кабылтуудан алыс болуңуз.
Күч: Always disconnect the power adapter when the pedal is not in use or during electrical storms.

8. Кыйынчылыктарды

Үн жок:
- Бардык кабелдер коопсуз туташтырылганын текшериңиз.
- Verify the power adapter is correctly plugged in and providing power.
- Check your guitar and ampкөтөргүчтүн үн жөндөөлөрү.
- Туташуулардын бузулушун жокко чыгаруу үчүн ар кандай кабелдер менен сынап көрүңүз.
Керексиз ызы-чуу:
- Ensure you are using the correct power adapter.
- Башка электр розеткасын колдонуп көрүңүз.
- Keep the pedal away from other electronic devices that may cause interference.
Effect Not Activating:
- Press the footswitch firmly. The LED should illuminate.
- Check the knob settings for the specific effect; some effects may be subtle at low settings.

9. Кепилдик жана колдоо

The SONICAKE RockStage Multi-Effects Guitar Pedal comes with a Продукцияга 1 жылдык кепилдик сатып алынган күндөн тартып.

For technical support, troubleshooting assistance, or warranty claims, please contact SONICAKE customer service. Refer to the contact information provided on the product packaging or the official SONICAKE webсайт.