CREWORKS Electric Wire Stripper Machine

1. Коопсуздук маалыматы

Please read and understand all safety warnings and instructions before operating this machine. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Машинаны иштетип жатканда ар дайым тиешелүү жеке коргонуу каражаттарын (ЖКК), анын ичинде коргоочу көз айнек жана кол кап кийиңиз.
• Иштөө алдында машинанын туруктуу, түз бетине коюлганын текшериңиз.
• Keep hands and fingers clear of the blade and feed rollers during operation.
• Машинаны нымдуу жерде иштетпеңиз же damp шарттар.
• Жөндөөлөрдү, техникалык тейлөөнү жүргүзүүдөн мурун же машина колдонулбай турганда электр кубатынан ажыратыңыз.
• Use the emergency stop button immediately if any malfunction or unsafe condition occurs.
• This machine is designed for stripping electrical wire insulation. Do not use it for purposes other than its intended use.
• Балдарды жана жанындагы адамдарды операция аймагынан алыс кармаңыз.

2. Продукт бүтүп калдыview жана компоненттер

The CREWORKS Electric Wire Stripper Machine is designed for efficient removal of insulation from various types of electrical wires. Familiarize yourself with the main components of the machine:

2.1-сүрөт: Продукциянын диаграммасы - This image illustrates the key components of the wire stripping machine, including the blade, adjustment knob, start/stop buttons, motor, gearbox, and base.

• Бычак: The cutting component that scores the wire insulation.
• Бычакты жөндөө баскычы: Used to precisely adjust the blade height for different wire diameters.
• Баштоо баскычы: Initiates the motor operation.
• Токтотуу баскычы: Halts the motor operation.
• Электр кабелдери: Connects the machine to the power source.
• Мотор: Provides the power for the stripping mechanism.
• Редуктор: Transmits power from the motor to the rollers.
• Негизги: Provides stability for the machine.
• Коопсуздук күзөтчүсү: Protects the user from moving parts and the blade.
• Бекитүү болт: Secures adjustable components.

Figure 2.2: High-Efficiency Roller and Blade - This image highlights the V-shaped roller with non-slip grooves and the ultra-sharp blade, designed for stable wire guidance and clean cuts.

3. Техникалык шарттар

Figure 3.1: High-Speed Motor - This image highlights the powerful 180W motor that enables efficient wire stripping at speeds up to 30 m/min.

4. Орнотуу

Before operating your CREWORKS Electric Wire Stripper Machine, ensure proper setup for safe and efficient use.

1. Пакеттен чыгаруу: Carefully remove all components from the packaging. Verify that all parts listed in the package contents are present.
2. Жайгашкан жери: Place the machine on a sturdy, flat, and stable workbench or surface. Ensure there is sufficient space around the machine for safe operation and for the stripped wire to exit.
3. Кубат туташуу: Connect the power cable to a grounded 110V AC outlet. Ensure the power switch is in the "OFF" position before plugging in.
4. Бычакты тууралоо:
   • Identify the blade adjustment knob on top of the machine.
   • Rotate the knob to raise or lower the blade. The blade should be set so that it scores the insulation without cutting into the copper conductor. A good starting point is to set the blade just touching the wire insulation.
   • Test with a small piece of wire to ensure the correct depth is achieved. Adjust as necessary.
5. Feed Hole Selection: The machine features multiple feed holes for various wire sizes. Select the appropriate feed hole that closely matches the diameter of the wire you intend to strip.

   Figure 4.1: Feed Hole Plates - This image shows the three different feed hole plates, including an adjustable one, to accommodate various wire sizes from 1.5mm to 25mm.

   

   Figure 4.2: Adjustable Feed Hole Plate - This image demonstrates the adjustable feed hole plate, allowing for stripping of cables from 1.5-16.8 mm without needing to switch plates.

5. Иштөө нускамалары

Follow these steps to safely and effectively strip wires using your CREWORKS machine:

1. Зымды даярдаңыз: Ensure the wire is straight and free of kinks or severe bends.
2. Күйгүзүү: Press the green "Start" button to turn on the machine. The motor will begin to run.
3. Feed the Wire: Carefully insert the end of the insulated wire into the selected feed hole. The rollers will grip the wire and pull it through the machine.

   Figure 5.1: Easy Operation Steps - This image visually guides the user through the three main steps: adjusting blade height, turning on power, and feeding the wire.
4. Monitor Stripping: As the wire passes through, the blade will score the insulation, and the rollers will separate it from the conductor. Guide the wire as it exits to prevent tangling.
5. Remove Insulation: Once the wire has passed through, the insulation should be cleanly cut and easily removable from the copper.
6. Өчүрүү: After stripping, press the red "Stop" button to turn off the machine.

The machine is capable of stripping various types of cables, including copper wires, multi-conductor wires, electrical wires, automotive wires, and stranded wires.

Figure 5.2: Versatile Wire Compatibility - This image illustrates the wide range of cable types, from 1.5-25 mm, that the machine can effectively strip, including copper, multi-conductor, electrical, stranded, and automotive wires.

6. Техникалык тейлөө

Үзгүлтүксүз тейлөө сиздин зымды чечүүчү машинаңыздын узак иштөөсүн жана оптималдуу иштешин камсыз кылат.

• Тазалоо: After each use, disconnect the power and clean any accumulated insulation debris from the machine, especially around the blade and rollers. Use a brush or compressed air.
• Бычак текшерүү: Periodically inspect the blade for sharpness and damage. A dull blade will result in poor stripping performance. Replace the blade if it shows signs of wear or damage.
• Майлоо: Refer to the specific lubrication points in the detailed manual (if provided by manufacturer) for periodic lubrication of moving parts, such as gears and bearings, to ensure smooth operation.
• Моторду муздатуу: Ensure the motor's cooling fan and vents are clear of obstructions to prevent overheating.

  Figure 6.1: Motor Cooling Fan - This image shows the powerful cooling fan integrated into the motor, designed to dissipate heat and ensure prolonged machine operation.

• Сактагыч: Машинаны кургак, таза чөйрөдө күн нурунан жана экстремалдык температурадан алыс сактаңыз.

7. Кыйынчылыктарды

If you encounter issues with your wire stripping machine, refer to the following common problems and their solutions:

If the problem persists after attempting these solutions, please contact CREWORKS customer support for further assistance.

8. Кепилдик маалыматы

For detailed warranty information regarding your CREWORKS Electric Wire Stripper Machine, please refer to the warranty card included with your product packaging. The warranty typically covers manufacturing defects and material flaws for a specified period from the date of purchase. Keep your proof of purchase for warranty claims.

9. Колдоо

Should you require technical assistance, replacement parts, or have any questions not covered in this manual, please contact CREWORKS customer support. Contact details can typically be found on the product packaging, the official CREWORKS webсайты же сатып алуу дүмүрчөгү.

For the latest information and support resources, please visit the official CREWORKS store: CREWORKS Store on Amazon.