Maxpro Duo 120 AC/DC Professional Balance Charger/Discharger

Introduction

The Maxpro Duo 120 is a high-performance, dual-channel AC/DC professional balance charger and discharger. It is designed for charging and discharging various battery types, including LiPo, LiFe, LiHV, NiMH, NiCd, and Pb batteries. This device offers precise control over charging parameters, ensuring optimal battery health and safety. Please read this manual thoroughly before operating the charger to ensure safe and efficient use.

Маанилүү коопсуздук нускамалары

• Заряддоо түзүлүштү дайыма жакшы желдетилген жерде, күйүүчү материалдардан алыс иштетиңиз.
• Never leave the charger unattended while it is in operation.
• Ensure the correct battery type and cell count are selected before starting any charge or discharge cycle. Incorrect settings can lead to battery damage, fire, or explosion.
• Use only the appropriate charging cables and connectors.
• Бузулган же шишип кеткен батареяларды заряддоого аракет кылбаңыз.
• Заряддоочу түзүлүштү нымдуулуктан, чаңдан жана түз күн нурунан алыс кармаңыз.
• Бул шайман оюнчук эмес. Балдар жетпеген жерде сактаңыз.

Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

• Maxpro Duo 120 Charger/Discharger Unit
• AC Power Cord
• DC киргизүү кабели
• Balance Boards (2x)
• Charging Cables (various types)
• Колдонуучунун Колдонмосу (бул документ)

Image: The Maxpro Duo 120 AC/DC Professional Balance Charger/Discharger unit. This image shows the overall appearance of the charger, including its dual-channel design and display screen.

Продукт бүттүview

Front Panel

The front panel features two independent charging channels, each with its own LCD display, navigation buttons, and output ports. Each channel includes a main output port for connecting the battery and a balance port for multi-cell battery balancing.

Арткы панель

The rear panel houses the AC power input, DC power input, and cooling fan vents. Ensure these vents are not obstructed during operation to prevent overheating.

Жайгашуу

Кубатка туташуу

1. AC кубаттуулугу: Connect the supplied AC power cord to the AC input port on the rear of the charger, then plug the other end into a suitable wall outlet (100-240V AC).
2. DC кубаттуулугу: Alternatively, connect the supplied DC input cable to the DC input port on the rear of the charger, and the other end to a 11-18V DC power source (e.g., a car battery or regulated DC power supply).
3. The charger will power on, and the LCD display will illuminate.

Батареяларды туташтыруу

1. Identify the correct charging cable for your battery.
2. Connect the main charging lead of the battery to the main output port of the desired channel (CH1 or CH2).
3. For multi-cell batteries (LiPo, LiFe, LiHV), connect the battery's balance lead to the appropriate balance board, then connect the balance board to the balance port on the charger.
4. Бардык туташуулардын коопсуз экенин жана туура полярдуулук сакталганын текшериңиз.

Иштөө нускамалары

Менюда чабыттоо

Each channel has dedicated buttons for navigation:

• BATTERY TYPE/STOP: Used to select battery type and stop current operation.
• INC (+): Менюларда маанилерди көбөйтөт же алдыга жылдырат.
• DEC (-): Менюларда маанилерди азайтат же артка жылдырат.
• START/ENTER: Confirms selections and starts operations.

Батареяны заряддоо

1. Батарея түрүн тандоо: басыңыз BATTERY TYPE/STOP button repeatedly until the correct battery chemistry (e.g., LiPo, NiMH) is displayed.
2. Иштөө режимин тандоо: Колдонуу INC (+) or DEC (-) to select the desired operation (e.g., Balance Charge, Fast Charge, Storage, Discharge). Press БАШТОО/КИРҮҮ ырастоо үчүн.
3. Параметрлерди коюу: Adjust the charge current (Amps) and cell count/voltagд колдонуу INC (+) жана DEC (-) баскычтар. Басыңыз БАШТОО/КИРҮҮ to move between parameters.
4. Заряддоону баштоо: Once all parameters are set, press and hold the БАШТОО/КИРҮҮ button for 3 seconds to begin the charging process. The charger will perform a battery check before starting.
5. Прогресс мониторинги: The display will show real-time charging data.
6. Заряддоону токтотуу: басыңыз BATTERY TYPE/STOP button at any time to stop the operation.

Discharging a Battery

1. Follow steps 1-2 from 'Charging a Battery' to select battery type and then select 'Discharge' mode.
2. Set the discharge current and final discharge voltagд колдонуу INC (+) жана DEC (-) баскычтар.
3. Басып кармап туруңуз БАШТОО/КИРҮҮ for 3 seconds to begin discharging.

Storage Mode (for LiPo/LiFe/LiHV)

Storage mode charges or discharges the battery to a specific voltage level optimal for long-term storage, preserving battery health. Select 'Storage' mode and confirm with БАШТОО/КИРҮҮ.

Техникалык тейлөө

• Тазалоо: Disconnect the charger from all power sources and batteries. Use a soft, dry cloth to clean the exterior. Do not use solvents or abrasive cleaners.
• Сактагыч: Заряддагычты салкын, кургак жерде, тике күн нурунан жана экстремалдык температурадан алыс сактаңыз.
• Кабелдик текшерүү: Бардык кабелдерди жана туташтыргычтарды эскирүү же бузулуу белгилерин дайыма текшерип туруңуз. Бардык бузулган компоненттерди дароо алмаштырыңыз.

Проблемаларды чечүү

• "CONNECTION BREAK": Check all battery connections, including main leads and balance leads. Ensure they are secure and correctly plugged in.
• "CELL ERROR": Indicates an issue with the battery's cell count or voltage. Verify the selected cell count matches the battery, and check individual cell voltages if possible.
• "INPUT VOLTAGE ERROR": Кирүүчү кубаттуулугуtage is outside the acceptable range (100-240V AC or 11-18V DC). Check your power source.
• "OVER TEMP": The charger is overheating. Disconnect power, allow it to cool down, and ensure proper ventilation.
• Заряддагыч күйбөй жатат: Check the power cable connection and the power source. Ensure the AC/DC input is within the specified range.

Техникалык мүнөздөмөлөр

Кепилдик жана колдоо

The Maxpro Duo 120 charger is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and duration, please refer to the documentation included with your purchase or contact the retailer. For technical support, troubleshooting assistance, or spare parts inquiries, please contact your point of purchase or the Maxpro customer service department.