Huanyu Electric Hydraulic Rebar Cutter RC-16B User Manual

1. Продукт бүтүп калдыview

The Huanyu Electric Hydraulic Rebar Cutter RC-16B is a powerful and portable tool designed for efficiently cutting steel rebar. It features an upgraded pure copper motor and a robust cutting head, capable of cutting rebar from 4mm to 16mm (3/20 inch to 5/8 inch) in 1-1.5 seconds. This tool is engineered for durability and ease of use in construction environments.

Figure 1: Huanyu Electric Hydraulic Rebar Cutter RC-16B.

2. Коопсуздук нускамалары

Электр шаймандарын иштетүүдө ар дайым коопсуздукка артыкчылык бериңиз. Колдонуудан мурун бардык коопсуздук эскертүүлөрүн жана көрсөтмөлөрүн окуп, түшүнүңүз.

• Коргоочу көз айнек тагыныңыз: Pieces of rebar may fly out during cutting. Always wear appropriate eye protection.
• Avoid Touching Pump Casing: Do not touch the pump casing, especially during extended use or in warm environments, as high temperatures may develop. Allow the tool to cool down if it becomes hot to the touch or if power is reduced due to overheating.
• Use Correct Hydraulic Oil: Only VG HYDRAULIC OIL can be added to this machine. Ensure the hydraulic oil reservoir is full to maintain sufficient power and proper operation.
• Secure Rebar: Before cutting, ensure the rebar is horizontally fixed using the adjustable positioning bolt to prevent movement and ensure a clean cut.
• Туруктуу операция: The tool features an integral workbench base design. For stable and effortless operation, place the rebar cutter on a flat, stable surface.

Figure 2: Important safety considerations for operating the rebar cutter.

3. Компоненттери жана өзгөчөлүктөрү

The RC-16B rebar cutter is designed with several key components for optimal performance and user comfort:

• Powerful Pure Copper Motor: An upgraded 850W motor with NSK bearings ensures high efficiency, low noise, and extended service life.
• Strong Cutting Force: High-purity, high-hardness cutter head provides fast cutting (1-1.5s) and smooth sections. Multiple screws fix the head for enhanced safety and stability.
• Adjustable Positioning Bolt: Facilitates fixing different rebar sizes horizontally for precise cuts.
• Эргономикалык тутка: Designed for comfortable grip and reduced operator fatigue.
• Integral Workbench Base: Allows stable operation when placed on a flat surface.
• Туруктуу курулуш: Metal surfaces are bright, clean, wear-resistant, and durable.

Figure 3: Key components of the RC-16B, including the ring nut, surface paint process, comfortable grip, and bottom stabilizing base.

Figure 4: Model parameters comparison, highlighting the RC-16B's specifications against other models.

4. Орнотуу

1. Куралды таңгактан чыгаруу: Carefully remove the rebar cutter and all accessories from its thickened insulating and shockproof plastic packaging.
2. Зыянды текшерүү: Before first use, inspect the tool for any visible damage that may have occurred during shipping. Do not operate if damaged.
3. Check Hydraulic Oil Level: Ensure the hydraulic oil reservoir is adequately filled with VG HYDRAULIC OIL. Hydraulic oil is not included in the oil bottle due to shipping restrictions and must be purchased separately.
4. Куралды жайгаштырыңыз: Place the rebar cutter on a stable, flat surface. The integral workbench base design allows for stable operation.
5. Туташуу кубаты: Plug the tool into a compatible 110V / 60Hz power outlet.

Figure 5: The rebar cutter comes with a plastic carrying case and basic tools. Hydraulic oil must be added separately.

5. Операция

Follow these steps for safe and effective rebar cutting:

1. Prepare Rebar: Place the rebar to be cut into the cutting area of the tool.
2. Adjust Positioning Bolt: Use the adjustable positioning bolt to fix the rebar horizontally. This is crucial for a clean and safe cut. Ensure the rebar is stable and does not move.
3. Кесүүнү баштоо: Press and hold the operating switch. The cutter will begin to push forward, shearing the rebar.
4. Толук кесүү: Continue holding the switch until the rebar is completely cut. The cutting speed is typically 1-1.5 seconds.
5. Release Switch: Release the switch once the cut is complete. The cutter will retract to its original position.
6. Remove Cut Rebar: Carefully remove the cut rebar pieces.

Figure 6: Close-up of the rebar cutting process, illustrating the strong cutting force and smooth section achieved.

Figure 7: Visual guide on how to properly position rebar for cutting, ensuring it is horizontal and secured.

8-сүрөт: Мисamples of various steel types that can be cut, including middle carbon steel, low carbon steel, and round steel.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and optimal performance of your rebar cutter.

• Колдонгондон кийин тазалоо: After each use, clean the cutting head and surrounding areas to remove any metal shavings or debris.
• Check Hydraulic Oil: Periodically check the hydraulic oil level and replenish with VG HYDRAULIC OIL as needed. Ensure the oil is clean and free of contaminants.
• Бычактарды текшерүү: Regularly inspect the cutting blades for wear or damage. Replace worn blades to maintain cutting efficiency and quality.
• Туура сактоо: When not in use, store the rebar cutter in its original plastic case in a dry, clean environment to protect it from dust and moisture.

7. Кыйынчылыктарды

If you encounter issues with your rebar cutter, refer to the following common problems and solutions:

8. Техникалык шарттар

Figure 9: Detailed product parameters for the RC-16B model.

9. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please contact Huanyu customer service. Refer to your purchase documentation for specific warranty terms and contact details.

You can also visit the official Huanyu store for more information: Huanyu Store on Amazon.