1. Продукт бүтүп калдыview
The APIELE 16mm Momentary Push Button Switch is designed for various electrical applications. This switch features a 12V LED ring indicator and a durable metal construction. It operates as a momentary switch, meaning it activates only while pressed and deactivates upon release. The switch is rated for 5A/250VAC and includes 1 Normally Open (NO) and 1 Normally Closed (NC) contact configuration, offering versatility for different circuit controls.
Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:
- Momentary operation: Push to activate, release to deactivate.
- Integrated 12V LED ring indicator.
- Durable metal construction with IP67 waterproof and IK10 protection.
- Contact configuration: 1 Normally Open (NO) and 1 Normally Closed (NC).
- Electrical life: 200,000 cycles; Mechanical life: 1,000,000 cycles.
Figure 1: APIELE 16mm Momentary Push Button Switch (Example: Black Shell-Blue LED)
2. Орнотуу жана орнотуу
2.1 Монтаждоо
The switch requires a 16mm (0.63 inch) mounting hole. The recommended panel thickness for installation is between 1mm and 10mm. Secure the switch with a nut torque of 5-14Nm.
Figure 2: Mounting dimensions and specifications for the 16mm push button switch.
2.2 Электр зымдары боюнча нускамалар
The switch comes with a pigtail socket for easy wiring. The LED operates on 12V DC. The switch contacts are 1 Normally Open (NO) and 1 Normally Closed (NC).
Refer to the wiring diagram below for connection details. The pigtail wires are color-coded as follows:
- Сары зым: Normal Closed Pin (NC)
- Көк жип: Normal Open Pin (NO)
- Жашыл зым: Common Pin (C)
- Кызыл зым: Positive LED Pin (+)
- Кара зым: Negative LED Pin (-)
Example Wiring for Normally Open (NO) Switch with Always-On LED:
- туташтыруу Green Wire (Common) to the power source positive (+).
- туташтыруу Blue Wire (Normal Open) to the positive (+) input of your device.
- туташтыруу Red Wire (LED +) to a 12V switched power source.
- туташтыруу Black Wire (LED -) to ground (-).
- The Сары зым (Normal Closed) is not used in this configuration.
This configuration allows the LED to be continuously lit when power is supplied to the red wire, and the switch will complete the circuit to your device when pressed.
Figure 3: Detailed wiring diagram for the APIELE 16mm push button switch, showing color codes for Normal Closed, Normal Open, Common, Positive LED, and Negative LED pins.
Video 1: This video demonstrates the features and quick connector for easy wiring of the APIELE 16mm Momentary Push Button Switch.
3. Иштөө нускамалары
This is a momentary push button switch. To operate, press and hold the button to activate the connected circuit. Release the button to deactivate the circuit. The integrated LED ring will illuminate according to its wiring configuration (e.g., always on, or only when the switch is pressed).
Figure 4: The switch is designed for high durability, with a mechanical life of 1,000,000 cycles and an electrical life of 200,000 cycles.
4. Техникалык тейлөө
The APIELE 16mm push button switch is designed for durability and minimal maintenance. It features an IP67 protection level, making it resistant to dust and water splashes. While it is splash-resistant, it is not designed to be submerged underwater.
- Тазалоо: Use a soft, dry cloth to clean the switch surface. Avoid abrasive cleaners or solvents.
- Экологиялык шарттар: The switch is suitable for operation in temperatures ranging from -20℃ to +55℃.
- Коргоо: The IP67 rating ensures protection against dust ingress and temporary immersion in water (up to 1 meter for 30 minutes). However, prolonged submersion is not recommended.
Figure 5: The switch features IP67 protection, indicating high resistance to dust and water splashes.
5. Кыйынчылыктарды
If you encounter issues with your APIELE 16mm Momentary Push Button Switch, consider the following troubleshooting steps:
- Коммутатор иштетилбей жатат:
- Verify all wiring connections are secure and correctly matched to the diagram (Figure 3).
- Ensure the power source is providing the correct voltage (e.g., 12V for the LED).
- Check for any loose connections at the pigtail socket or the device it controls.
- LED жарыксыз:
- Confirm the Red (+) and Black (-) LED wires are connected to a 12V power source and ground, respectively.
- Check for proper polarity.
- Ensure the 12V power source for the LED is active.
- Үзгүлтүксүз иштөө:
- Inspect all wires for damage or fraying.
- Ensure the switch is securely mounted and the nut torque is within the specified range (5-14Nm).
- Avoid exceeding the switch's rated current (5A/250VAC).
If problems persist after following these steps, contact customer support for further assistance.
6. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | APIELE |
| Модель номери | GQ16F-11E-12T |
| Операция түрү | Momentary (Push & Hold, ON; Release, OFF) |
| Которуу рейтинги | 5A/250VAC |
| Байланыш конфигурациясы | 1NO 1NC |
| LED Voltage | 12V DC |
| LED рейтинги | 15мА |
| LED үлгүсү | Ring көрсөткүчү |
| Mounting Cut Hole | 16мм (0.63 дюйм) |
| Панелдин калыңдыгы | 1 - 10 мм |
| Nut Torque | 5 - 14Nm |
| Байланыш каршылыгы | ≤30mΩ |
| Изоляцияга каршылык | ≥1000mΩ |
| Dielectric Intensity | 2000VAC |
| Иштөө температурасы | -20°C ~ +55°C |
| Механикалык жашоо | 1,000,000 XNUMX цикл |
| Электрдик өмүр | 200,000 XNUMX цикл |
| Коргоо деңгээли | IP67, IK10 |
| Байланыш материалы | Silver эритмеси |
| Shell Material | Алюминий |
| Туташтыргыч түрү | Плагин |
| Элемент Салмагы | 0.02 унция |
Видео 2: Бул видеонун үстүнөн камсыз кылатview of the APIELE 16mm Push Button Switch, highlighting its design and features.
7. Кепилдик жана колдоо
7.1 Кепилдик маалыматы
Specific warranty details for this product are not provided in the available information. Please refer to the retailer's return policy or contact APIELE directly for warranty inquiries.
7.2 Кардарларды колдоо
For technical assistance, product inquiries, or support, please visit the official APIELE store or contact their customer service department.
APIELE Store: https://www.amazon.com/stores/APIELE/page/194CDEEB-78B9-40FE-ABD1-C1F44F9C5282