Introduction
This manual provides essential instructions for the safe and efficient use of the Perel AC028 Intelligent Charger. This device is specifically designed for charging 12V lead-acid batteries, including Gel, AGM, and EFB types, utilizing a sophisticated 3-stage automatic charging cycle to optimize battery life and performance.
Коопсуздук нускамалары
Always read and understand all safety warnings and instructions before operating the charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- This charger is intended for 12V lead-acid batteries (Gel, AGM, EFB) only. Do not use with other battery types.
- Battery charging can produce explosive gases. Ensure adequate ventilation during charging and keep away from flames, sparks, and smoking materials.
- Батареяга туташтыруудан же аны үзүүдөн мурун, заряддагычты ар дайым электр булагынан ажыратыңыз.
- Avoid charging a frozen battery. Allow it to thaw before attempting to charge.
- Заряддоочу түзүлүштү жана батарейканы балдар жана үй жаныбарлары жетпеген жерде сактаңыз.
- Do not expose the charger to rain or excessive moisture. The unit has an IP65 rating, meaning it is protected against dust and low-pressure water jets, but it is not submersible.
- Электр зымы бузулган болсо, коркунучту болтурбоо үчүн аны өндүрүүчү, анын тейлөө агенти же ушуга окшогон квалификациялуу адамдар алмаштырышы керек.
Продукт өзгөчөлүктөрү
- 3-Сtage Automatic Charging Cycle: Ensures optimal charging and extends battery life.
- Батарея шайкештиги: Designed for 12V lead-acid batteries, including Gel, AGM, and EFB types.
- Rated Output: 12 VDC, 1.5 А.
- IP65 коргоо классы: Чаңдын кирип кетишинен жана каалаган тараптан келген төмөнкү басымдагы суу агымдарынан коргойт.
- Компакт дизайн: сактоо жана ташуу үчүн жеңил.
Техникалык шарттар
| Модел | AC028 |
| Киргизүү көлөмүtage | 220-240 VAC |
| Жыштык | 50/60 Гц |
| Output Voltage | 12 VDC |
| Output Current | 1.5 А |
| Номиналдуу ток | 0.25 А |
| Өлчөмдөрү (L x W x Y) | 147 x 72 x 42 мм |
| Салмагы | 376 г |
| IP коргоо классы | IP65 |
| Шайкеш батареянын түрлөрү | 12V Lead-Acid (Gel, AGM, EFB) |
| Негизги кабелдин узундугу | 1.5 м |
| Заряддоо кабелинин узундугу | 1 м |
Жайгашуу
- Ensure the Perel AC028 charger is disconnected from the mains power outlet.
- Кызыл (+) cl туташтырыңызamp of the charger to the positive (+) terminal of the 12V lead-acid battery.
- Кара (-) cl туташтырыңызamp of the charger to the negative (-) terminal of the 12V lead-acid battery.
- Verify that both connections are secure and properly seated to prevent arcing or poor contact.
- Plug the charger's main power cable into a suitable 220-240 VAC, 50/60 Hz mains power outlet.

Иштөө нускамалары
Once connected to the battery and mains power, the charger will automatically initiate its 3-stagэлектрондук заряддоо процесси.
- Күч көрсөткүчү: The 'POWER' LED will illuminate when the charger is connected to the mains power supply.
- Заряддоо көрсөткүчү: The 'CHARGING' LED will illuminate when the battery is actively being charged.
- Толук көрсөткүч: The 'FULL' LED will illuminate when the battery has reached a full charge. At this point, the charger will switch to a maintenance mode to prevent overcharging.
The charger can remain connected to the battery for extended periods for maintenance charging, ensuring the battery remains at an optimal charge level.

Техникалык тейлөө
- Regularly inspect the charger's cables, clampс, жана сasing for any signs of damage, wear, or corrosion. Do not use the charger if any part is damaged.
- Keep the charger clean and free from dust and debris. Use a dry cloth for cleaning. Do not use solvents or abrasive cleaners.
- Store the charger in a cool, dry, and well-ventilated area when not in use.
- Ensure the battery terminals are clean before connecting the charger for optimal contact.
Проблемаларды чечүү
The Perel AC028 charger is equipped with error indicators to help diagnose common issues:
| Ката коду | Description | Акция |
|---|---|---|
| F01 | Short circuit / Reverse connection / No connection | Check battery connections for correct polarity (+ to +, - to -). Ensure clamps are securely attached and there is no short circuit. |
| F02 | Бошоң байланыш | Батарея clamps are tightly connected to the battery terminals. |
| F03 | Батарея көлөмүtage өтө жогору | This charger is for 12V batteries. Ensure you are not attempting to charge a battery with a higher nominal voltage. |
| F04 | Батарея начар | The battery may be severely discharged, damaged, or at the end of its life. It might not be able to accept a charge. Consult a battery specialist. |

Кепилдик жана колдоо
For detailed warranty information, terms, and conditions, please refer to the documentation provided with your purchase or visit the official Perel website. For technical support or service inquiries, contact your retailer or the manufacturer's customer service department.