BONTEC TV Wall Mount Bracket Instruction Manual

Продукт бүттүview

The BONTEC TV Wall Mount Bracket is designed to securely hold most 13-30 inch LCD and LED screens, with a maximum weight capacity of 25kg. This full-motion bracket provides versatile viewing options, allowing for 3600 rotation, +/-150 tilt, and +/-300 swivel adjustments.

Image: The BONTEC TV Wall Mount Bracket, showcasing анын компакттуу жана бекем конструкциясы.

Key features of this wall mount include:

• Толук кыймылды тууралоо: Offers 3600 rotation, +/-150 tilt, and +/-300 swivel for optimal viewбурчтар.
• Strong and Secure Design: Constructed from high-quality cold-rolled steel, supporting screens up to 25kg.
• Оңой орнотуу: Simple 3-step installation process with all necessary hardware included.
• Жалпы шайкештик: Fits most 13-30 inch LED, LCD, and Plasma TVs or monitors with VESA 75x75mm and 100x100mm patterns.
• Мейкиндикти үнөмдөөчү дизайн: Extends only 9.5cm from the wall, providing a sleek, low-profile көрүнүшү.

Коопсуздук маалыматы

Please read all instructions carefully before installation and use. Improper installation may result in serious injury or damage to your equipment.

• Ensure the wall structure can safely support the combined weight of the mount and the display.
• 25 кг (55 фунт) максималдуу салмактан ашпаңыз.
• This mount is suitable for wood studs, brick, and concrete walls. It is not suitable for drywall installation alone.
• Жыгач мыктардын так жайгашкан жерин аныктоо үчүн мык издегичти колдонуңуз.
• Always use a spirit level to ensure the mount is installed straight.
• Орнотуу учурунда балдарды жана үй жаныбарларын алыс кармаңыз.
• Бардык бурамаларды бекем бекитиңиз, бирок өтө катуу тартпаңыз.
• Орнотуу процессинин кандайдыр бир бөлүгүнө ишенбесеңиз, квалификациялуу адиске кайрылыңыз.

Пакеттин мазмуну

Please verify that all components are present and undamaged before beginning installation. The package typically includes:

• Дубалга орнотулган кронштейн чогултуу
• VESA плитасы
• Дубалга орнотуучу жабдуулар (бурамалар, якорьлор)
• TV Mounting Hardware (various screws, washers, spacers for VESA 75x75mm and 100x100mm)
• Instruction Manual

Техникалык шарттар

Image: Detailed product dimensions of the BONTEC TV Wall Mount Bracket.

Орнотуу жана орнотуу

Орнотууга чейинки текшерүү тизмеси

• Дубал түрү: Ensure your wall is suitable (wood stud, brick, or concrete). Do not install on drywall alone.
• Screen Size & Weight: Verify your TV/monitor is between 13-30 inches and weighs no more than 25kg.
• VESA үлгүсү: Check your TV's VESA pattern (mounting holes on the back) is 75x75mm or 100x100mm.
• Керектүү куралдар: Drill, spirit level, screwdriver, pencil, measuring tape.

Image: Illustration of suitable wall types for installation: wood stud, brick wall, and concrete wall. A warning indicates that installation on drywall alone is not recommended.

Орнотуу кадамдары

1. Бургулоо пункттарын белгилөө: Position the wall plate on your desired wall location. Use a spirit level to ensure it is perfectly horizontal. Mark the drilling points with a pencil. For wood studs, drill pilot holes. For brick or concrete, drill holes and insert wall anchors. The image below shows the typical marking and drilling process.
   

   Image: Step-by-step guide for easy assembly, showing marking drill points and attaching the wall mount.
2. Дубал плитасын бекитүү: Secure the wall plate to the wall using the provided screws. Ensure it is firmly attached and stable.
3. Attach VESA Plate to TV: Carefully place your TV face down on a soft, clean surface. Attach the VESA plate to the back of your TV using the appropriate screws and washers from the provided hardware kit. Ensure the screws are tightened securely.
4. Mount TV onto Wall Plate: With assistance, carefully lift the TV with the attached VESA plate. Align the VESA plate with the wall plate and slide it down until it locks into place. Secure the safety nut at the top to prevent accidental dislodgement.

Иштөө нускамалары

Once installed, your BONTEC TV Wall Mount Bracket allows for various adjustments to achieve your optimal viewтажрыйбасы:

• Tilt Adjustment (+/-150): Loosen the tilt knob/screws on the side of the VESA plate, adjust the screen to your desired vertical angle, and then re-tighten the knob/screws to secure the position.
• Swivel Adjustment (+/-300): Gently push or pull the screen horizontally to swivel it left or right. The arm will articulate to allow for this movement.
• Rotation (3600): The VESA plate allows for full 360-degree rotation, enabling you to switch between landscape and portrait orientations. Simply rotate the screen to the desired orientation.

Image: Visual representation of the full motion adjustment capabilities: 3600 rotation, +/-150 tilt, and +/-300 swivel.

Техникалык тейлөө

Regular maintenance helps ensure the longevity and safe operation of your wall mount:

• Тазалоо: Wipe the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Мезгилдүү текшерүүлөр: Ар бир нече ай сайын, бардык бурамалар менен болттордун бекем бекитилгенин текшерип туруңуз. Зарыл болсо, кайра бекитиңиз.
• Кыймылды текшерүү: Periodically test the tilt, swivel, and rotation mechanisms to ensure they move smoothly. If any part feels stiff, apply a small amount of silicone-based lubricant to the moving joints.

Проблемаларды чечүү

If you encounter issues with your BONTEC TV Wall Mount, refer to the following common problems and solutions:

Кепилдик жана колдоо

BONTEC products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official BONTEC website. If you require technical assistance or have questions regarding your product, please contact BONTEC customer support through their official channels.

For further information or to explore other BONTEC products, you may visit the BONTEC Store on Amazon.