uxcell 1/4 Inch Drive 8mm 6-Point Deep Socket Instruction Manual

Продукт бүттүview

This manual provides instructions for the uxcell 1/4-inch drive, 8mm 6-point deep socket. This tool is designed for various fastening tasks in household maintenance, DIY projects, and general repairs. It is crafted for durability and efficient performance.

Негизги өзгөчөлүктөрү

• Өлчөмү: 1/4-inch drive, 8mm 6-point socket, with a total length of 50mm (2-inch).
• Материал: Constructed from premium chrome vanadium steel (Cr-V) for enhanced strength and durability.
• Бүтүрүү: Features a mirror chrome plated finish to resist corrosion and ensure longevity.
• 6 пункттуу дизайн: The high-torque 6-point design grips the flat sides of fasteners, not the corners, which helps prevent round-off.
• Deep Broach: The extra-deep broach allows the socket to reach over longer threaded shafts, providing access to nuts that standard sockets cannot reach.
• Коопсуз тиркеме: Detent notches in the drive end securely lock onto ratchets and extension bars.

Орнотуу жана орнотуу

The uxcell deep socket is designed for use with a 1/4-inch drive ratchet, extension bar, or other compatible drive tools. Follow these steps for proper setup:

1. Туура айдоо куралын тандаңыз: Ensure your ratchet or extension has a 1/4-inch square drive.
2. Розетка тиркөө: Align the square opening of the socket with the drive end of your tool. Push firmly until the detent ball on the drive tool engages with the detent notch inside the socket, securing it in place.
3. Жарактуулугун текшерүү: Колдонуудан мурун, розетканын бекем бекитилгенин текшерүү үчүн аны акырын тартыңыз.

Иштөө нускамалары

Always ensure the socket size precisely matches the fastener head to prevent damage to both the fastener and the tool.

1. Розетканы жайгаштырыңыз: Place the socket squarely over the fastener head. Ensure it is fully seated.
2. Күч колдонуу: Use your ratchet or drive tool to turn the fastener. For tightening, turn clockwise. For loosening, turn counter-clockwise.
3. Контролду сактоо: Apply steady, controlled force. Avoid sudden jerking motions, which can cause slippage or damage.
4. Deep Socket Advantage: Utilize the deep design to access fasteners on longer threaded shafts without obstruction.

Коопсуздук чаралары:

• Do not use damaged sockets. Inspect tools before each use.
• Учуучу сыныктардан коргонуу үчүн коопсуздук көз айнеги сыяктуу тиешелүү жеке коргонуу каражаттарын тагыныңыз.
• Do not use extension bars or 'cheater pipes' to increase leverage on the ratchet handle, as this can overload the tool and cause breakage or injury.
• Ensure the workpiece is stable and secured before applying torque.

Техникалык тейлөө

Proper maintenance extends the life of your uxcell deep sockets and ensures continued reliable performance.

• Тазалоо: After each use, wipe the socket clean of dirt, grease, and debris. A clean cloth is usually sufficient. For stubborn grime, use a mild degreaser and rinse thoroughly.
• Сактагыч: Store sockets in a dry environment to prevent rust. A socket rail or toolbox compartment is recommended to keep them organized and protected from impact.
• Текшерүү: Periodically inspect sockets for signs of wear, cracks, chips, or any other damage. Discard any damaged sockets immediately to prevent injury or damage to fasteners.
• Коррозиядан коргоо: The chrome plated finish provides excellent corrosion resistance. For long-term storage in humid conditions, a light coat of rust preventative oil can be applied.

Проблемаларды чечүү

Socket slips on fastener:

Ensure the socket size precisely matches the fastener. The 6-point design minimizes slippage, but an incorrect size will cause issues. Check for worn fastener heads or damaged sockets.

Socket does not fit on drive tool:

Verify that your drive tool has a 1/4-inch square drive. Ensure no debris is obstructing the connection. The detent ball on the drive tool must align with the detent notch in the socket for a secure fit.

Socket shows signs of rust:

Although chrome plated, prolonged exposure to moisture or harsh chemicals can cause rust. Clean any rust with a wire brush or rust remover and apply a rust preventative oil. Always store in a dry place.

Техникалык шарттар

For additional product details, please refer to the product listing or contact uxcell customer support.

Кепилдик жана колдоо

For information regarding warranty coverage and customer support for your uxcell product, please refer to the official uxcell website or contact the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.

Жалпы суроолор же техникалык жардам алуу үчүн, сиз төмөнкү дарекке кайрылсаңыз болот uxcell Store on Amazon.