Einhell Power X-Change 18V Cordless Long Reach Hedge Trimmer GE-HH 18/45 Li T Solo User Manual

1. Продукт бүтүп калдыview

The Einhell Power X-Change GE-HH 18/45 Li T is a powerful 18V cordless long reach hedge trimmer designed for maintaining hedges, shrubs, and bushes, especially at height. This tool offers cordless freedom and is part of the Einhell Power X-Change battery system (battery and charger sold separately).

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• Зымсыз эркиндик: Operates on an 18V Power X-Change battery for unrestricted movement.
• Телескоптук тутка: Infinitely adjustable aluminum handle extends up to 2.5 meters (8 feet 2 inches) for reaching high areas.
• Тактык бычактар: Laser-cut and diamond-ground steel blades provide clean, sharp cuts with a cutting length of 400mm (16 inches) and 16mm teeth spacing.
• Жөнгө салынуучу кесүүчү баш: A 7-position tiltable cutting head allows for versatile trimming angles.
• Балансталган дизайн: Handle-mounted motor ensures optimal balance, reducing fatigue during extended use.
• Туруктуу курулуш: Features a robust metal gearbox for long-lasting performance.

2. Коопсуздук нускамалары

Always prioritize safety when operating power tools. Read and understand all safety warnings and instructions before use. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Жеке коргонуу каражаттары (ЖКК): Always wear appropriate PPE, including safety glasses, hearing protection, sturdy gloves, and non-slip footwear. A safety helmet with a face shield is recommended, especially when working overhead.
• Иш чөйрөсү: Keep the work area clean and well-lit. Do not operate the trimmer in wet or damp conditions. Keep bystanders, children, and pets at a safe distance (at least 15 meters / 50 feet).
• Инструментти текшерүү: Before each use, inspect the trimmer for any damage, loose parts, or worn blades. Do not use a damaged tool.
• Батареянын коопсуздугу: Use only Einhell Power X-Change 18V batteries and chargers. Do not expose batteries to heat, direct sunlight, or water.
• Туура кармоо: Always hold the trimmer firmly with both hands.
• Тоскоолдуктарды болтурбоо: Be aware of hidden wires, fences, or other objects that could be struck by the blades.
• Тейлөө: Disconnect the battery before performing any maintenance, cleaning, or when clearing jammed material.
• Сактагыч: Триммерди кургак, коопсуз жерде, балдар жетпеген жерде сактаңыз.

3. Камтылган компоненттер

The following components are typically included with your Einhell GE-HH 18/45 Li T hedge trimmer:

• Хедж триммер башчысы
• Узарылуучу полюс
• Blade Guard
• Instruction Manual

Note: Battery and charger are not included and must be purchased separately as part of the Power X-Change system.

4. Орнотуу

Follow these steps to prepare your hedge trimmer for use:

1. Уюлду чогултуу: Connect the hedge trimmer head to the extendable pole. Ensure all connections are secure and locked into place according to the diagrams in the full manual.
2. Штангалардын узундугун тууралоо: Loosen the locking mechanism on the telescopic aluminum handle. Extend the pole to the desired length for your task, then securely tighten the locking mechanism. The pole can be adjusted from 1.6m to 2.5m.
3. Батарея салыңыз: Ensure the battery is fully charged. Align the battery with the battery slot on the trimmer's handle and slide it in until it clicks securely into place.
4. Погонду тагыңыз: For comfortable and balanced operation, especially when extended, attach the provided shoulder strap to the designated points on the trimmer. Adjust the strap for a snug fit.
5. Remove Blade Guard: Carefully remove the blade guard from the cutting blades before starting the trimmer. Always replace the blade guard when the tool is not in use or during transport.

5. Иштөө нускамалары

Before operating, ensure you have read the safety instructions and the trimmer is properly set up.

1. Триммерди иштетүү: With the battery inserted, press the safety lock-off button (if present) and then squeeze the trigger switch to start the motor. Release the trigger to stop.
2. Adjusting Cutting Head Angle: The cutting head can be tilted to 7 different positions. To adjust, press the release button/lever on the head, set it to the desired angle, and ensure it locks securely in place. This allows for ergonomic cutting of hedge tops and sides.
3. Кесүү техникасы:
   • For vertical surfaces, use a sweeping motion from bottom to top.
   • For horizontal surfaces, hold the trimmer slightly angled (about 10-15 degrees) to ensure a clean cut and allow clippings to fall away.
   • Avoid forcing the blades through thick branches. If the blades jam, immediately release the trigger and remove the battery before clearing the obstruction.
4. Working at Height: When using the extended pole, maintain a stable stance. Use the shoulder strap to distribute weight and reduce strain. Be mindful of overhead power lines and other obstacles.
5. Триммерди токтотуу: Release the trigger switch. The blades will stop quickly. Always remove the battery when finished or before making adjustments.

6. Техникалык тейлөө

Үзгүлтүксүз тейлөө оптималдуу иштешин камсыз кылат жана хедж триммериңиздин иштөө мөөнөтүн узартат.

• Бычакты тазалоо: After each use, remove the battery and carefully clean the blades with a stiff brush to remove sap and debris.
• Бычакты майлоо: Apply a light machine oil or blade lubricant to the cutting blades after cleaning to prevent rust and ensure smooth operation.
• Бычакты курчутуу: Dull blades can tear foliage and strain the motor. Have the blades professionally sharpened or replace them if they become excessively dull or damaged.
• Жалпы тазалоо: Wipe down the housing of the trimmer with a damp кездеме. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонбоңуз.
• Сактагыч: Store the trimmer in a dry, secure location, away from moisture and extreme temperatures. Always reattach the blade guard before storage. Remove the battery if storing for extended periods.

7. Кыйынчылыктарды

Бул бөлүмдө сиз хедж триммериңиз менен кездешүүсү мүмкүн болгон жалпы маселелер каралат.

8. Техникалык шарттар

Technical data for the Einhell GE-HH 18/45 Li T hedge trimmer:

• Модель номери: 3410866
• Кубат булагы: 18V Battery Powered (Power X-Change system)
• Бышактын узундугу: 450 мм (17.7 дюйм)
• Кесүү узундугу: 400 мм (16 дюйм)
• Teeth Spacing: 16 мм
• Продукциянын өлчөмдөрү (L x W x Y): 82.28" x 5.12" x 6.69" (209 см x 13 см x 17 см)
• Элемент Салмагы: 4.28 килограмм (9.44 фунт)
• Бышактын материалы: Эритме болот
• туткасы материалы: Алюминий
• Өндүрүүчү: Эйнхелл

9. Кепилдик жана колдоо

For warranty information, technical support, or to order spare parts, please refer to the official Einhell webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.

ЕБ запастык бөлүктөрүнүн болушунун узактыгы: 2 жыл

Кошумча жардам алуу үчүн, сураныч, баш багыңыз Эйнхеллдин расмий өкүлү webсайт.