Diversey Soft Care All Purpose Foam (Model 100907877) Instruction Manual

1. Продукт бүтүп калдыview

Diversey Soft Care All Purpose Foam is a versatile hand, hair, and body wash designed for commercial use with IntelliCare dispensers. This product features a refreshing lemon tea splash fragrance and an effective surfactant system that gently cleanses the skin. Its pH-balanced formula is skin compatibility tested to minimize irritation, even with frequent use. The luxurious foam ensures even application and easy rinsing, making it suitable for various environments where an economical all-in-one wash is desired.

Негизги өзгөчөлүктөрү:

• Gentle and effective hand and body wash helps reduce contaminants.
• Skin compatibility tested, pH balanced formula reduces skin irritation for frequent users.
• Lemon Tea Splash fragrance provides a pleasant aroma.
• Luxurious foam for even application and easy rinse.
• Economical all-in-one wash solution.

2. Коопсуздук маалыматы

• Тышкы колдонуу үчүн гана.
• Көзгө тийбеңиз.
• Жылаңач жалындан же түз жылуулук булактарынан алыс кармаңыз.

3. Курамы

Sodium lauryl ether sulfate, Alcohol ethoxylate, Alcohol, C12-C15, ethoxylated, Dimethyl-5,5-dimethylhydantoin

4. Колдонуу багыттары

This product is designed for use with an IntelliCare dispenser (sold separately).

For Hand Wash:

1. Apply one dose of product to hands.
2. Rub for at least 20 seconds, taking special care to wash between fingers and around fingertips.
3. жакшылап чайкоо.
4. Dry hands completely.

For Shampоо:

1. Lather.
2. Чайыңыз.
3. Керек болсо кайталаңыз.

For Body Wash:

1. Apply to wet skin or a damp кездеме.
2. Clean and rinse.

5. Setup and Installation of IntelliCare Dispenser

The Diversey Soft Care All Purpose Foam is designed for use with the IntelliCare Hybrid Dispenser. Below are instructions for mounting and initial setup of the dispenser.

Mounting Using Tape:

1. Prep the wall or mirror surface by cleaning it with an alcohol wipe.
2. Беттин толук кургап кетишине жол бериңиз.
3. Remove the red backing of the tape from the dispenser.
4. Mount the dispenser 12 inches above the countertop or sink, ensuring it is level.
5. Press the dispenser firmly to the wall or mirror and hold it for 15 to 20 seconds to allow it to properly adhere.
6. It is recommended to allow the dispenser to remain mounted for 24 hours before installing the product.

Mounting Using Screws:

1. If a dispenser has been mounted to a wall previously, remove it.
2. Remove any double-sided tape from the back of the dispenser.
3. Open the dispenser using the key provided.
4. Ensure the dispenser is 12 inches above the surface. Mark the top hole and the bottom left and right-most holes.
5. Drill these three holes using a 1/4 inch drill bit.
6. Push the plastic anchors into the holes.
7. Hold the dispenser up to the wall and insert the top screw and washer.
8. Thread the second and third screws into the anchors and tighten all three screws.

Battery Installation (Hybrid Dispenser):

1. Ачкыч менен диспенсерди ачыңыз.
2. Remove the plastic battery cover.
3. Insert four C batteries in the proper orientation.
4. Replace the battery cover. The dispenser will turn on automatically.

Video: IntelliCare Dispenser Installation

This video demonstrates the installation process for Diversey IntelliCare dispensers, including mounting options and how to insert Soft Care soap cartridges.

6. Operating the IntelliCare Dispenser

The IntelliCare Hybrid Dispenser offers both touch-free and manual operation modes, ensuring continuous access to soap or sanitizer.

Inserting Product:

1. Once your dispenser is mounted, prime the product by depressing the actuation pump until product is released.
2. Slide the product cartridge straight into the mounting location. The packaging is designed to only fit into the dispenser with the label facing out.

Adjusting Dosage:

The IntelliCare dispenser allows for the dose to be adjusted from 0.4 milliliters to 1 milliliter.

• On the Hybrid Dispenser: 'ON 1' indicates 1 milliliter, and 'ON 2' indicates 0.4 milliliters.
• On the Manual Dispenser: Sliding the switch to the left will dispense 1 milliliter, and sliding it to the right will dispense 0.4 milliliters.

Close the front cover of the dispenser to begin use.

Touch-Free and Manual Modes:

The IntelliCare Hybrid Dispenser functions as a touch-free unit. However, if the product level or battery runs low, a 'PUSH' light will illuminate, allowing users to manually dispense the product, ensuring uninterrupted service.

Video: IntelliCare Hybrid Dispenser Overview

Бул видеодо толук маалымат берилетview of the Diversey IntelliCare Hybrid Dispenser, explaining its unique features, customization options, compatibility with various product types (foam, liquid, gel), and its dual touch-free and manual functionality.

7. Техникалык тейлөө

Replacing Product Cartridges:

1. When the product has run out, open the dispenser with the key.
2. Slide the empty cartridge out.
3. Slide a new refill cartridge into the dispenser.
4. Капкакты жабыңыз.

The product packaging will compress as it evacuates, allowing for easy visual indication of remaining product through the viewing window on the dispenser.

8. Техникалык шарттар

9. Кыйынчылыктарды

If the dispenser is not dispensing product in touch-free mode, check the following:

• Verify that the product cartridge is correctly inserted and not empty.
• Check the battery level. If the 'PUSH' light is illuminated, the batteries may be low and require replacement.
• Ensure there are no obstructions blocking the sensor.

If issues persist, please refer to the support information below.

10. Кепилдик жана колдоо

For warranty information or technical support, please contact Diversey customer service through their official website or the contact details provided with your IntelliCare dispenser.