ORICO 6629US3 USB3.0 Dual Bay HDD/SSD Docking Station User Manual

Introduction

Сатып алганыңыз үчүн рахматasing the ORICO 6629US3 USB3.0 Dual Bay HDD/SSD Docking Station. This device is designed to provide convenient data transfer and offline cloning capabilities for 2.5-inch and 3.5-inch SATA hard drives and solid-state drives. Please read this manual carefully to ensure proper installation and operation.

Продукт өзгөчөлүктөрү

Жогорку ылдамдыктагы которуу: Features a high-speed USB 3.0 port, achieving a maximum transfer speed of 5Gbps. UASP support further enhances transfer speeds. Backward compatible with USB 2.0 / 1.0.
Клондоо функциясы: Supports two 2.5-inch or 3.5-inch SATA hard drives, with a total capacity of up to 20TB (10TB per slot). Includes an offline HDD/SSD cloning function, allowing direct drive duplication without a computer.
Колдонууга оңой: Driver-free and supports hot-swap. Progress indicator lights clearly show the device's operational status during cloning.
Кеңири шайкештик: Vertical insertion design, tool-free installation, and excellent heat dissipation. Supports Mac, Windows, and Linux operating systems.

Пакеттин мазмуну

1x ORICO USB3.0 HDD Docking Station
1x 12V3A Power Adapter (PSE certified)
1x USB3.0 Cable (100cm)
1x Колдонуучунун колдонмосу
1x Тейлөө картасы

Техникалык шарттар

Продукт аты	ORICO HDD Docking Station with Clone Function
Модель номери	6629US3
Колдоого алынган дисктер	2.5/3.5-inch SATA HDD/SSD
Max Capacity	Up to 10TB per slot, 20TB total
Функциялар	Offline clone, Data transfer
киргизүү Interface	USB 3.0 түрү-B
Материал	ABS пластик
Түс	Кара
Кубаттуу адаптер	12V3A (PSE certified)
Кабелдин узундугу	USB 3.0 A-B (100cm)
Элемент Салмагы	260 грамм
Шайкеш OS	Mac, Windows, Linux

Жайгашуу

Аппаратты таңгактан чыгаруу: Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз.
Туташуу кубаты: Connect the provided 12V3A power adapter to the docking station's power input port and then to a power outlet.
Дисктерди киргизүү:
Image: The ORICO 6629US3 docking station with a 3.5-inch HDD and a 2.5-inch SSD inserted into its two vertical slots.
Insert your 2.5-inch or 3.5-inch SATA HDD/SSD vertically into the designated slots (HDD1 and HDD2). Ensure the drives are firmly seated. The device supports tool-free installation.
Connect to PC (for data transfer):
Image: The ORICO 6629US3 docking station connected to a laptop via a USB 3.0 cable, demonstrating its use for data access.
If you intend to use the docking station for data transfer to/from a computer, connect the USB 3.0 cable from the docking station to an available USB 3.0 port on your computer.
Күйгүзүү: Press the power button on the docking station. The power LED should illuminate blue.

Иштөө нускамалары

A. Data Transfer Mode (PC Connection)

Ensure the 'PC/CLONE' switch on the back of the device is set to 'PC'.
Connect the docking station to your computer using the USB 3.0 cable.
Insert your 2.5-inch or 3.5-inch SATA HDD/SSD into the slots.
Power on the docking station. Your computer should detect the drives automatically (driver-free).
You can now access the drives as external storage devices on your computer.

B. Offline Clone Function

The offline clone function allows you to duplicate a hard drive without connecting to a computer. This is useful for creating backups or upgrading drives.

Important Notes for Cloning:

Булак диск: The original HDD/SSD to be copied. Insert into the 'Source' slot.
Максаттуу диск: The destination HDD/SSD for the copy. Insert into the 'Target' slot.
The target disk's capacity must be барабар же чоңураак the source disk's capacity. Cloning will not start otherwise.
Cloning will overwrite all data on the target disk. Please back up any important data from the target disk before proceeding.
Incorrect insertion of Source and Target disks can lead to data loss on your original drive. Always confirm disk positions before starting.
The time required for cloning depends on the total capacity of the source hard disk, not the size of the data stored on it.

Компьютерден ажыратыңыз: Ensure the docking station is disconnected from your computer.
Дисктерди киргизүү: Insert the source disk into the 'Source' slot (HDD1) and the target disk into the 'Target' slot (HDD2). Ensure they are firmly seated.
Image: The ORICO 6629US3 docking station showing the 'Source' and 'Target' slots for offline cloning, with drives inserted.
Туташуу кубаты: Connect the power adapter and press the power button. The device will beep twice and begin a self-test.
Set Clone Mode: Push the 'PC/CLONE' switch on the back of the product to the 'CLONE' position.
Клондоону баштоо: Press the 'Start' button on the product. Cloning will begin.
Прогресс мониторинги: The LED indicators (25%, 50%, 75%, 100%) will show the cloning progress. All LEDs will illuminate when cloning is complete.
Image: A close-up of the ORICO 6629US3 docking station highlighting the LED progress indicators (25%, 50%, 75%, 100%) during an offline cloning operation.
Аяктоо: Once all LEDs are lit, the cloning process is finished. You can now safely remove the drives.

Техникалык тейлөө

Тазалоо: Док станциясынын сыртын тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Суюк тазалоочу каражаттарды же аэрозольдорду колдонбоңуз.
Сактагыч: Аппаратты түз күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
Жылуулук таркатылышы: The vertical design aids in heat dissipation. Ensure the device is placed in a well-ventilated area to prevent overheating, especially during prolonged use or cloning operations.
Image: The ORICO 6629US3 docking station illustrating its vertical design and airflow for efficient heat dissipation.
Электр камсыздоо: Always use the original 12V3A power adapter provided with the device to ensure stable operation.
Image: The ORICO 6629US3 docking station with its 12V power adapter connected, emphasizing stable power delivery.

Проблемаларды чечүү

Компьютер дискти аныктай алган жок:
- Ensure the USB cable is securely connected to both the docking station and the computer.
- Verify the 'PC/CLONE' switch is set to 'PC' mode.
- Check if the drive is properly seated in the slot. If only one HDD LED lights up, the unlit HDD has a connection issue. Reinsert the drive.
- Компьютериңиздеги башка USB портуна туташып көрүңүз.
- For new drives, they may need to be initialized and formatted in Disk Management (Windows) or Disk Utility (Mac) before they appear.
Offline Clone Fails to Start:
- Ensure the docking station is disconnected from any computer.
- Verify the 'PC/CLONE' switch is set to 'CLONE' mode.
- Confirm that the target disk's capacity is equal to or greater than the source disk's capacity.
- Check that the source and target drives are inserted into the correct slots ('Source' and 'Target').
- Ensure both drives are properly seated.
Жай өткөрүү ылдамдыгы:
- Ensure you are using a USB 3.0 port on your computer and the provided USB 3.0 cable.
- Verify that your operating system supports UASP for optimal performance.
Аппараттын ысып кетиши:
- Ensure adequate ventilation around the docking station.
- Avoid placing the device in enclosed spaces.

Кепилдик жана колдоо

ORICO provides an 18 айлык кепилдик for this product from the date of purchase. Additionally, ORICO offers өмүр бою техникалык колдоо анын продукциялары үчүн.

If you encounter any issues or have questions regarding the product, please contact ORICO customer support through your retailer or the official ORICO website. Please have your purchase receipt and product model number (6629US3) ready when contacting support.

ORICO 6629US3