Skyflame SK-FB0037-SS-12

Skyflame 12" x 6" Rectangular Gas Fire Pit and Fireplace H-Burner Instruction Manual

Model: SK-FB0037-SS-12

Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Skyflame 12" x 6" Rectangular Gas Fire Pit and Fireplace H-Burner. Please read all instructions carefully before use and retain this manual for future reference.

Skyflame 12x6 inch H-Burner with connection kit

Image: The Skyflame 12" x 6" Rectangular Gas Fire Pit and Fireplace H-Burner, shown with included connection kit components: brass fittings, damper C-clamp, and flexible gas hose.

Маанилүү коопсуздук маалыматы

  • Read and understand all instructions before installing or operating this appliance.
  • Туура эмес орнотуу, тууралоо, өзгөртүү, тейлөө же тейлөө жаракатка же мүлккө зыян келтириши мүмкүн.
  • For outdoor use, ensure adequate ventilation. For indoor use, consult local codes and regulations for proper venting and installation.
  • Бензинди же башка күйүүчү бууларды жана суюктуктарды ушул же башка шайманга жакын жерде сактабаңыз же колдонбоңуз.
  • Always check for gas leaks after installation or servicing.
  • Keep children and pets away from the fire pit/fireplace when in operation.
  • Never leave a lit fire pit/fireplace unattended.
  • Ensure the burner is completely cool before handling or covering.

Продукт өзгөчөлүктөрү

  • Өлчөмдөрү: 12 inches (Depth) x 6 inches (Width) x 1 inch (Height).
  • Материал: Constructed from high-quality 304 stainless steel for durability and corrosion resistance.
  • BTU рейтинги: Rated for 60,000 BTUs, providing substantial heat output.
  • Дизайн: Rectangular H-burner with three pipes for even flame distribution.
  • Gas Holes: Precision-drilled gas holes ensure smooth gas flow and minimize whistling.
  • Шайкештик: Suitable for both natural gas and liquid propane applications (requires appropriate conversion kit, not included unless specified).
  • Камтылган аксессуарлар: No Whistle Connection Kit with brass fittings and damper C-clamp.
Skyflame H-Burner dimensions and material features

Image: Visual representation of the H-burner's 12-inch length and 6-inch width, highlighting its 304 stainless steel construction, quiet operation, and heat resistance.

Close-up of Skyflame H-Burner features

Сүрөт: деталдуу view of the H-burner's 1/2 inch gas inlet, machine-drilled gas holes, high-quality stainless steel finish, solid brass fitting, and damper C-clamp.

Орнотуу жана орнотуу

Professional installation is recommended for gas appliances. Ensure all local codes and regulations are followed.

  1. Prepare the Fire Pit/Fireplace: Ensure the area where the burner will be installed is clean, dry, and free from debris. Verify that the dimensions of your fire pit or fireplace opening are compatible with the 12" x 6" burner.
  2. Газ туташуу:
    • Connect the appropriate gas line to the 1/2 inch male gas inlet on the H-burner. Use the provided brass fittings and ensure all connections are tight and sealed with gas-rated sealant tape or compound.
    • If using liquid propane, ensure a proper regulator is installed between the propane tank and the burner.
    • The included "No Whistle" connection kit is designed to minimize noise during operation.
  3. Positioning the Burner: Place the H-burner in the desired location within your fire pit or fireplace. Ensure it is level and stable.
  4. Медиа жайгаштыруу: Distribute fire glass or lava rock evenly over the burner, ensuring that the gas holes are not completely covered to allow for proper flame distribution and oxygen flow. Avoid overfilling.
  5. Ачуу сыноо: After all connections are made, turn on the gas supply and perform a leak test using a soap and water solution on all connections. Bubbles indicate a leak. Turn off the gas immediately and tighten connections until no bubbles appear.
Skyflame H-Burner connection types

Image: Diagram illustrating the 1/2" male burner connection, 5/8" female hose connection, 1/2" female to 5/8" male brass fitting, and 5/8" male to 1/2" female brass fitting for various gas line configurations.

Video: This video demonstrates the installation process for a Skyflame drop-in fire pit pan with burner and cover, showing how to connect gas lines and secure components. While it features a pan, the burner connection principles are similar.

Видео: Бул видеодо толук маалымат берилетview of the Skyflame Rectangular Gas Fire Pit and Fireplace H-Burner, showcasing its design and potential applications.

Иштөө нускамалары

  1. Жарыктан мурун: Ensure the gas supply valve is open. Check that the burner is clear of any obstructions.
  2. Күйгүчтү жарыктандыруу:
    • Use a long-stemmed lighter or match to ignite the gas at the burner ports.
    • Slowly turn the gas control valve to the "ON" position. The gas should ignite immediately.
    • If the gas does not ignite within 5 seconds, turn off the gas, wait 5 minutes for gas to dissipate, and then repeat the lighting procedure.
  3. Жалынды тууралоо: Use the gas control valve to adjust the flame height to your desired level.
  4. Өчүрүү: Turn the gas control valve to the "OFF" position. Ensure the flames are completely extinguished. Close the main gas supply valve if the unit will not be used for an extended period.
Skyflame H-Burner in fireplace and fire pit settings

Сүрөт: Мисamples of the Skyflame H-Burner installed in both a fireplace and an outdoor fire pit, demonstrating its versatility.

Skyflame H-Burner flames with BTU rating

Сүрөт: жакын план view of the Skyflame H-Burner producing vibrant flames, with a visible "Rated BTU 60,000" label, indicating its heat output.

Видео: Кыскача алдын ала маалыматview video demonstrating the flames produced by a burner pan, useful for visualizing the flame pattern.

Видео: Кыскача алдын ала маалыматview видео шоуcasing the flame output of a 3-pipe burner, similar to the product, providing a visual reference for operation.

Техникалык тейлөө

  • Тазалоо: Ensure the burner is completely cool before cleaning. Use a soft cloth and mild soap to clean the stainless steel surface. Avoid abrasive cleaners or scrubbers that could scratch the finish.
  • Inspect Gas Holes: Periodically check the gas holes for any blockages from debris or fire media. Use a small wire or pin to clear any obstructions.
  • Байланыштарды текшерүү: Annually inspect all gas connections for tightness and signs of wear or corrosion. Re-apply gas-rated sealant if necessary.
  • Сактагыч: If the fire pit/fireplace will not be used for an extended period, especially in harsh weather conditions, consider covering the unit to protect the burner from elements.

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
No flame or weak flameGas supply off, low gas pressure, clogged gas holes, regulator issue.Check gas supply valve. Ensure propane tank is not empty. Clear gas holes. Inspect regulator for damage or malfunction.
Whistling noiseGas flow turbulence, improper gas pressure.Ensure "No Whistle" connection kit is correctly installed. Adjust gas pressure if possible. Ensure gas holes are clear.
Газдын жытыГаздын агып кетиши.Immediately turn off gas supply. Perform a leak test with soap and water. Tighten all connections. If smell persists, evacuate the area and contact a qualified gas technician.
Отту күйгүзбөйтNo spark, no gas flow, igniter malfunction.Ensure gas is flowing. Check igniter for proper function and battery (if applicable). Use a long-stemmed lighter to manually ignite.

Техникалык шарттар

  • Модель номери: SK-FB0037-SS-12
  • Материал: 304 Дат баспас болот
  • Продукциянын өлчөмдөрү: 12"D x 6"W x 1"H
  • Стиль: Заманбап
  • Бүткөн түрү: Жылмаланган
  • Форма: Төрт бурчтуу
  • Күйүүчү май түрү: Liquefied Petroleum Gas (LP), Natural Gas (NG)
  • Түсү: Silver
  • Элемент Салмагы: 1.61 фунт
  • Өндүрүүчү: Skyflame

Кепилдик жана колдоо

For warranty information or technical support, please contact Skyflame customer service through the retailer where the product was purchased or visit the official Skyflame webсайт.

Skyflame Store: Visit the Skyflame Store on Amazon

© 2023 Skyflame. All rights reserved.

This manual is for informational purposes only. Skyflame is not responsible for any damages or injuries resulting from improper installation or use of this product.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.