HyperGear HYG-14590 Wireless Fast Charging Car Dash Mount User Manual

Introduction

This manual provides instructions for the HyperGear HYG-14590 Wireless Fast Charging Car Dash Mount. This device is designed to securely hold and wirelessly charge Qi-enabled smartphones in your vehicle, offering hands-free navigation and communication.

Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• Telescopic Mount
• Fast Charge Car Adapter
• Микро USB кабели
• Колдонуучунун Колдонмосу (бул документ)

Орнотуу нускамалары

1. Монтаждоо ордун тандоо: Select a clean, flat surface on your dashboard or windshield. Ensure the location does not obstruct your view же транспорт каражаттарын башкарууга тоскоолдук кылуу.
2. Тоону тиркөө:
   • Clean the chosen surface thoroughly.
   • Remove the protective film from the sticky gel suction cup.
   • Сорох чөйчөктү бетине бекем басыңыз.
   • Engage the 2-step locking lever to secure the mount in place.
3. Туташуу кубаты:
   • Insert the Micro USB cable into the charging port on the mount.
   • Plug the other end of the Micro USB cable into the Fast Charge Car Adapter.
   • Insert the Fast Charge Car Adapter into your vehicle's 12V power outlet (cigarette lighter socket).
4. Adjust the Mount:
   • Extend the telescopic arm up to 8 inches as needed.
   • Pivot the arm up to 230° to achieve the desired angle.
   • Rotate the cradle head 360° to switch between portrait and landscape orientation.

Иштөө нускамалары

1. Түзмөгүңүздү жайгаштыруу: Gently open the adjustable padded cradle grips and place your Qi-enabled smartphone into the mount. The grips will automatically secure the device.
2. Зымсыз кубаттоо: Once your device is placed in the mount and the mount is powered, wireless charging will begin automatically. Ensure your device is centered on the charging pad for optimal performance.
3. Түзмөгүңүздү алып салуу: To remove your device, gently open the cradle grips and lift your smartphone out.
4. Hands-Free Колдонуу: The mount allows for hands-free use of navigation, calls, and other applications while driving. Always ensure your device is positioned safely and does not obstruct your view жолдун.

Техникалык тейлөө

• Тазалоо: Use a soft, dry cloth to clean the mount. Do not use abrasive cleaners or solvents.
• Сорох чөйчөктү багуу: If the sticky gel suction cup loses adhesion, rinse it with warm water and let it air dry. This can help restore its stickiness.
• Сактагыч: Узак мөөнөткө колдонулбаганда, монтажды күн тийбеген, салкын, кургак жерде сактаңыз.

Проблемаларды чечүү

Түзмөк зымсыз кубатталбай жатат:

• Ensure your smartphone is Qi-enabled or has a Qi-enabled receiver.
• Verify the Micro USB cable is securely connected to both the mount and the car adapter.
• Check that the car adapter is firmly seated in the vehicle's 12V power outlet.
• Ensure your phone is centered on the charging pad of the mount.
• Зымсыз кубаттоого тоскоол боло турган калың телефон каптарын алып салыңыз.

Mount not sticking to surface:

• Clean the dashboard or windshield surface thoroughly before attachment.
• Ensure the 2-step locking lever is fully engaged.
• Rinse the sticky gel suction cup with warm water and air dry to restore adhesion.
• Avoid mounting on textured or porous surfaces.

Phone not held securely:

• Ensure the adjustable padded cradle grips are properly closed around your device.
• Verify that your phone's size is compatible with the mount's adjustable range.

Техникалык шарттар

Кепилдик маалымат

This HyperGear product comes with a 30 күндүк кепилдик from the date of purchase. This warranty covers manufacturing defects. Please retain your proof of purchase for warranty claims. For further details or to initiate a claim, please refer to the HyperGear official webсайтка же кардарларды тейлөөгө кайрылыңыз.

Кардарларды колдоо

For technical assistance, product inquiries, or warranty support, please visit the official HyperGear webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Байланыш маалыматын адатта продукт таңгагынан же бренддин расмий онлайн катышуусунан тапса болот.