Kramer TAVOR-8-SUB

Kramer TAVOR-8-SUB сабвуферинин колдонуу боюнча колдонмосу

Model: TAVOR-8-SUB

1. Киришүү

This manual provides essential information for the proper installation, operation, and maintenance of your Kramer TAVOR-8-SUB Powered Subwoofer. Please read this manual thoroughly before using the product to ensure optimal performance and safety. The TAVOR-8-SUB is designed to reproduce low-range audio frequencies, enhancing the audio experience in various environments.

2. Коопсуздук нускамалары

  • Кубат булагы: Only connect the subwoofer to a power source as specified in the specifications section. Ensure the voltage сиздин аймагыңызга шайкеш келет.
  • Вентиляция: Эч кандай желдетүүчү тешиктерди жаап албаңыз. Ашыкча ысып кетүүнүн алдын алуу үчүн аппараттын айланасында адекваттуу аба агымын камсыз кылыңыз.
  • Суу жана ным: Do not expose the subwoofer to rain, moisture, or excessive humidity. This product is not waterproof.
  • Тазалоо: Disconnect the power cord before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosol cleaners.
  • Тейлөө: Бул продуктту өзүңүз тейлөөгө аракет кылбаңыз. Бардык тейлөөнү квалификациялуу тейлөө кызматкерлерине тапшырыңыз.
  • Жайгашкан жери: Position the subwoofer on a stable surface or mount it securely according to the instructions to prevent it from falling.

3. Пакеттин мазмуну

Төмөндө көрсөтүлгөн бардык буюмдар продуктуңуздун таңгагында бар экенин текшериңиз:

  • Kramer TAVOR-8-SUB Powered Subwoofer
  • Электр кабели
  • Көрсөтмө (бул документ)
  • Mounting Hardware (if applicable for specific mounting options)

4. Продукт бүтүп калдыview

Фронт view of the Kramer TAVOR-8-SUB Powered Subwoofer, showing the 8-inch woofer port.

1-сүрөт: Front/Side View. This image displays the compact, rectangular enclosure of the TAVOR-8-SUB, featuring a prominent circular port for the 8-inch woofer on one side. The design is clean and minimalist, suitable for discreet placement.

Rear panel of the Kramer TAVOR-8-SUB Powered Subwoofer, showing input/output ports, volume, and crossover controls.

2-сүрөт: Rear Panel. This image shows the rear of the subwoofer, detailing the control panel. Visible components include RCA input/output jacks, a volume knob, a crossover frequency adjustment knob, a phase switch, a power switch, and the AC power inlet. Safety warnings are also present on the panel.

5. Орнотуу

5.1 Орнотуу жана орнотуу

The TAVOR-8-SUB offers versatile placement options:

  • Полго орнотуу: Place the subwoofer on a stable, level surface. Ensure it is not obstructing pathways or ventilation.
  • Дубалга орнотуу: The unit can be mounted on a wall. Use appropriate mounting hardware (not always included, check package contents) and ensure the wall structure can support the subwoofer's weight (8 pounds). Follow local building codes and safety guidelines for wall mounting.
  • Next to Wall: The design allows for discreet placement next to a wall, potentially hiding the control panel for a cleaner aesthetic.

5.2 Байланыш

The TAVOR-8-SUB uses RCA connectivity for audio input.

  1. Locate the RCA input jacks on the rear panel of the subwoofer (refer to Figure 2).
  2. Connect an RCA audio cable from the subwoofer output of your audio receiver or amplifier to the RCA input on the TAVOR-8-SUB.

5.3 Кубат туташтыруу

  1. Ensure the subwoofer's power switch is in the OFF position.
  2. Connect the provided power cord to the AC power inlet on the rear panel of the subwoofer.
  3. Электр шнурунун экинчи учун ылайыктуу электр розеткасына сайыңыз.

6. Иштөө нускамалары

6.1 Initial Power-Up and Basic Operation

  1. After connecting all cables, switch the power button on the rear panel to the ON position.
  2. Start with the VOLUME knob set to its minimum position.
  3. Begin playing audio through your main audio system.
  4. Slowly increase the VOLUME knob on the TAVOR-8-SUB until the desired bass level is achieved.

6.2 Adjusting Crossover Frequency

The TAVOR-8-SUB features an adjustable crossover frequency to seamlessly integrate with your main speakers.

  • The CROSSOVER knob allows you to set the upper frequency limit at which the subwoofer will operate.
  • If your main speakers are small, set the crossover frequency higher (e.g., 80-100 Hz) to allow the subwoofer to handle more of the mid-bass frequencies.
  • If your main speakers are larger and can reproduce lower frequencies, set the crossover frequency lower (e.g., 50-60 Hz).
  • Experiment with the setting to find the best blend between the subwoofer and your main speakers, aiming for a smooth transition without a noticeable gap or overlap in sound.

6.3 Фазалык башкаруу

The phase switch (0°/180°) helps to ensure that the subwoofer's sound waves are in sync with your main speakers, preventing cancellation or reinforcement issues at the crossover point.

  • Listen to music with strong bass content.
  • Toggle the phase switch between 0° and 180°.
  • Select the position that results in the most impactful and coherent bass response.

6.4 Auto Standby Feature

The TAVOR-8-SUB includes an auto standby feature. If no audio signal is detected for a period, the subwoofer will automatically enter a low-power standby mode. It will automatically power on when an audio signal is detected again.

6.5 Бассты күчөтүү функциясы

This subwoofer includes a Bass Boost feature to enhance low-frequency output. Refer to the rear panel controls (Figure 2) for the specific switch or knob to activate and adjust this feature, if available as a user-adjustable control.

7. Техникалык тейлөө

  • Тазалоо: Regularly wipe the exterior of the subwoofer with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents.
  • Вентиляция: Желдетүү тешиктери чаңдан жана таштандылардан таза экенине ынаныңыз.
  • Текшерүү: Электр шнурун жана аудио кабелдерди бузулуу белгилери бар-жогун мезгил-мезгили менен текшерип туруңуз. Бузулган кабелдерди дароо алмаштырыңыз.

8. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Сабвуферден үн чыкпайт
  • Кубат туташкан эмес же күйгүзүлгөн
  • Аудио кабели бош же туура эмес
  • Үн өтө төмөн
  • Auto standby active
  • Check power cord and power switch
  • Ensure RCA cable is securely connected
  • Increase subwoofer volume
  • Play audio to activate from standby
Бурмаланган же түшүнүксүз бас
  • Көлөмү өтө бийик
  • Crossover frequency incorrect
  • Phase mismatch
  • Reduce subwoofer volume
  • Adjust crossover frequency
  • Toggle phase switch (0°/180°)
Subwoofer hums
  • Негизги цикл маселеси
  • Бузулган кабель
  • Try plugging into a different outlet or using a ground loop isolator
  • Аудио кабелди алмаштыруу

9. Техникалык шарттар

ӨзгөчөлүкДеталь
Модель номериTAVOR 8-SUB
БрендКрамер
Динамик түрүSubwoofer, Surround Sound, Woofer
Сабвуфердин диаметри8 дюйм
Көлөмдүү үн каналынын конфигурациясы1.0
Байланыш технологиясыRCA
Аудио чыгаруу режимиСтерео
Power SourceЭлектр зымдары
Монтаж түрүПолго орнотуу, дубалга орнотуу
Өзгөчө өзгөчөлүкBass Boost
Элемент Салмагы8 фунт
Сууга туруктуулук деңгээлиСууга чыдамдуу эмес
ASINB07DVT172C
Дата биринчи жеткиликтүү18-июнь, 2018-жыл

10. Кепилдик маалыматы

Kramer products are designed and manufactured to high-quality standards. For specific warranty terms and conditions applicable to your TAVOR-8-SUB Powered Subwoofer, please refer to the warranty card included with your product or visit the official Kramer Electronics website. Warranty coverage typically includes defects in materials and workmanship under normal use for a specified period from the date of purchase.

11. Колдоо

If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact Kramer Electronics customer support. You can find contact information, including phone numbers and email addresses, on the official Kramer Electronics webсайт (www.kramerav.com). Please have your product model number (TAVOR-8-SUB) and purchase details ready when contacting support.

Тектеш документтер - TAVOR-8-SUB

Preview Kramer PN-6P тез баштоо боюнча колдонмо: Орнотуу жана орнотуу
Kramer PN-6P 6.5 дюймдук эки тараптуу пассивдүү кулондуу динамикти орнотуу жана жөндөө боюнча кыскача колдонмо. Таңгактан чыгаруу, орнотуу, зымдарды туташтыруу жана негизги функцияларды камтыйт.
Preview Kramer VM-8HN 1:8+2 HDMI Looping DA User Manual
Comprehensive user manual for the Kramer VM-8HN 1:8+2 HDMI Looping DA, covering installation, connection, operation, technical specifications, and protocol commands.
Preview Kramer WM-6P Two-way Wall Mounted Passive Speaker User Manual
Comprehensive user manual for the Kramer WM-6P 6.5-inch two-way wall-mounted passive speaker. Covers installation, wiring (8-ohm, 70V/100V), technical specifications, and SPL calculation for commercial audio applications.
Preview Kramer CL-6D Dante Ceiling Speaker Quick Start Guide
A concise guide to installing and using the Kramer CL-6D PoE powered Dante Ceiling Speaker, covering unboxing, mounting, wiring, and network setup for professional audio systems.
Preview Kramer MTX3-88-PR-PRO 8x8 Matrix Switcher: Quick Start Guide
Крамер MTX3-88-PR-PRO, профессионалдуу аудио-видео багыттоо үчүн иштелип чыккан 8x8 Бардыгы бир матрицаны алмаштыргычты тез орнотуп, иштетиңиз. Бул колдонмо кутудан чыгарууну, баштапкы байланыштарды жана негизги операцияны камтыйт.
Preview Kramer WM-8D PoE Dante Speaker Quick Start Guide
Kramer WM-8D, 8 дюймдук, 2 тараптуу дубалга орнотулган PoE менен иштөөчү Данте динамиги, орнотулган DSP, аралаштыргыч жана орнотуу үчүн тез баштоо колдонмосу ampкөтөргүч. Функциялар, орнотуу жана Данте тармагы жөнүндө билип алыңыз.