1. Киришүү
The CONTEC CMS50NA Pulse Oximeter is a portable device designed for non-invasive spot-check measurement of oxygen saturation of arterial hemoglobin (SpO2) and pulse rate. It is intended for sports and aviation use only and is not a medical device. This manual provides essential information for the safe and effective operation of the device.
Маанилүү эскертүү: This product is intended for sports and aviation use only. It is not a medical device and should not be used for diagnosis or treatment of any medical condition.
2. Эмнелер камтылган
Пакетти ачканда, бардык компоненттер бар экенин текшериңиз:
- CONTEC CMS50NA Pulse Oximeter (1 unit)
- Handy Carry Pouch (1 unit)
- 1.5V AAA Alkaline Batteries (2 units)
- Long Lanyard (Neck/Wrist Cord) (1 unit)
- Колдонуучунун колдонмосу (1 бирдик)
Image: All items included in the CONTEC CMS50NA Pulse Oximeter package, including the oximeter, carry pouch, batteries, lanyard, and user manual.
3. Орнотуу
3.1 Батареяны орнотуу
- Open the battery cover on the back of the device by sliding it downwards.
- Insert two 1.5V AAA alkaline batteries into the battery compartment, ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
- Батарейканын капкагын жабыңыз, аны кайра ордуна жылдырыңыз, ал чыкылдатмайынча.
Image: The open battery compartment of the pulse oximeter, showing where to insert the two AAA batteries.
3.2 Ланярды бекитүү
- Thread the thinner end of the lanyard through the lanyard loop hole located on the side of the oximeter.
- Pass the thicker end of the lanyard through the looped thinner end and pull gently to secure.
Image: A visual guide demonstrating the three steps to correctly attach the neck/wrist lanyard to the pulse oximeter.
4. Иштөө нускамалары
4.1 Ченөө
- Пульсоксиметрдин клибин ачыңыз.
- Insert one of your fingers (preferably the index or middle finger) into the rubber opening of the oximeter, ensuring it is placed correctly.
- Press the power button on the top of the device.
- Keep your hand still and avoid shaking during the measurement process.
- The SpO2 and Pulse Rate values will appear on the display within a few seconds.
Image: A three-step visual guide showing how to open the clip, insert a finger, and press the power button to take a measurement.
4.2 Дисплейди түшүнүү
The bright TFT display shows the following information:
- SpO2: Blood Oxygen Saturation Level (displayed as a percentagжана).
- PRbpm: Pulse Rate (displayed in beats per minute).
- Pulse Rate Waveform: A graphical representation of your pulse.
- Пульстук штанга графиги: A vertical bar graph indicating pulse intensity.
- Батарея көрсөткүчү: Калган батареянын иштөө мөөнөтүн көрсөтөт.
Image: The pulse oximeter display showing SpO2 and PRbpm readings, along with the pulse waveform and bar graph.
4.3 Дисплейдин багыты
The device features a rotatable multi-directional display. The display orientation automatically adjusts based on how the device is held, ensuring easy readability from various angles.
Image: The pulse oximeter display shown in different orientations, demonstrating its rotatable feature for easy viewing.
4.4 Автоматтык түрдө өчүрүү
The device will automatically power off after 5 seconds of inactivity or when the finger is removed from the sensor.
5. Техникалык тейлөө
5.1 Аппаратты тазалоо
- Оксиметрдин бетин жумшак чүпүрөк менен тазалаңыз damp70% изопропил спирти менен.
- Түзмөктү сууга же башка тазалоочу эритмеге салбаңыз.
- Кайра колдонуудан мурун, түзмөк толугу менен кургак экенин текшериңиз.
5.2 Батареяны алмаштыруу
Replace batteries when the low battery indicator appears on the display. Always use new 1.5V AAA alkaline batteries.
5.3 Сактоо
Store the pulse oximeter in its handy carry pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Күйгүзүлгөндөн кийин дисплей жок. | Батареялар өлүп калган же туура эмес орнотулган. | Replace batteries or re-install them correctly, ensuring polarity. |
| SpO2 and PR values are unstable. | Finger not inserted properly, patient movement, or cold hands. | Re-insert finger, remain still, or warm hands before measurement. Ensure no nail polish. |
| "Finger Out" message displayed. | Finger not detected or removed. | Ensure finger is fully inserted into the sensor. |
| Дисплей күңүрт. | Low battery or screen protective film still on. | Replace batteries. Remove the thin protective film from the screen. |
7. Техникалык шарттар
- Модель аты: CMS50NA
- Продукциянын өлчөмдөрү: 2.24 x 1.34 x 1.22 дюйм
- Салмагы: 3.21 унция (батареялар менен)
- Энергияга талаптар: 2 x 1.5V AAA щелочтуу батарейкалар
- Батареянын иштөө мөөнөтү: Approximately 20-30 hours of continuous operation
- Дисплей түрү: TFT дисплей
- SpO2 өлчөө диапазону: 0% - 100%
- Пульс ылдамдыгын өлчөө диапазону: 30 bpm - 250 bpm
- Автоматтык түрдө өчүрүү: 5 секунд аракетсиздиктен кийин
- Өндүрүүчү: Contec Medical Systems Co., Ltd.
8. Кепилдик жана колдоо
For warranty information and customer support, please refer to the official CONTEC webсайтка же сатуучуга кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
Юридикалык баш тартуу: This product is intended for sports and aviation use only. We are the direct manufacturer, there is a clear screen protector which can be removed before use.
Кошумча ресурстар үчүн, сиз кайрыла аласыз Расмий колдонуучу колдонмо (PDF).
9. Расмий продукт Videos
How to take measurements with CONTEC50NA pulse oximeter?
Video: An official demonstration by Contec Medical Systems Co., Ltd. showing the correct procedure for taking measurements with the CMS50NA pulse oximeter.