1. Киришүү
The uxcell 91C4 DC 0-10V Analog Panel Voltage Gauge is designed for measuring direct current (DC) voltage within a range of 0 to 10 volts. This instruction manual provides essential information for the safe installation, operation, and maintenance of the device. Please read this manual thoroughly before use.
2. Коопсуздук маалыматы
Always observe the following safety precautions to prevent personal injury or damage to the meter and other equipment:
- Ensure the power supply to the circuit being measured is disconnected before installation or wiring.
- тtage to be measured does not exceed the meter's specified range (DC 0-10V).
- Connect the meter correctly according to the wiring diagram. Incorrect polarity can damage the meter.
- Do not use the meter in environments with excessive moisture, dust, or corrosive gases.
- Бул өлчөгүч туруктуу токтун көлөмү үчүн иштелип чыкканtage measurement only. Do not connect to AC circuits.
- Монтаждоо жана тейлөөнү квалификациялуу кызматкерлер гана аткарышы керек.
3. Продукт бүтүп калдыview
The uxcell 91C4 is a compact analog panel voltmeter featuring a clear scale and a moving coil mechanism. It is designed for flush panel mounting.
1-сүрөт: Фронт view of the uxcell 91C4 DC 0-10V Analog Panel Voltmeter. This image displays the meter's face with its scale from 0 to 10 volts, the 'V' unit, the model number '91C4', and the accuracy class '2.5A'. The needle is positioned at zero, indicating no voltage киргизүү.
2-сүрөт: Алдыңкы жана каптал view of the uxcell 91C4 DC 0-10V Analog Panel Voltmeter with key dimensions. The image shows the meter's width and height as 45mm (1.77 inches) and its depth as 36mm (1.42 inches), providing essential information for panel cutout and mounting.
4. Техникалык шарттар
| Модел | 91C4 |
| Өлчөө диапазону | DC 0-10V |
| Тактык классы | 2.5 (Error Margin: ± 2.5%) |
| Бүтүрүү | 0.4V |
| Өлчөмдөрү (Узундугу × Туурасы × Т) | 45mm × 45mm × 36mm (1.77in × 1.77in × 1.42in) |
| Таза Салмак | 33 г (1.16 унция) |
| Casing Материал | High-grade ABS Plastic |
| Шунттук резистор | Талап кылынбайт |
| Монтаж түрү | Панел орнотуу |
5. Орнотуу жана орнотуу
Follow these steps for proper installation of the voltage gauge:
- Панелди кесип даярдоо: Create a square cutout in your panel with dimensions appropriate for the meter (approximately 45mm x 45mm). Ensure the cutout is clean and free of burrs.
- Insert Meter: Carefully insert the meter into the prepared panel cutout from the front.
- Secure Meter: From the rear of the panel, use the provided bolts and screws to secure the meter in place. Tighten them evenly to prevent damage to the meter casing.
- Зымдар:
- Identify the positive (+) and negative (-) terminals on the back of the meter.
- Connect the positive lead from the DC circuit to be measured to the meter's positive (+) terminal.
- Connect the negative lead from the DC circuit to be measured to the meter's negative (-) terminal.
- Кыска туташуунун алдын алуу үчүн бардык туташуулардын коопсуз жана изоляцияланганын текшериңиз.
- Байланыштарды текшерүү: Double-check all wiring before applying power to the circuit.
3-сүрөт: Арткы view of the uxcell 91C4 DC 0-10V Analog Panel Voltmeter, illustrating the terminal posts and the included mounting hardware. This hardware, consisting of nuts, washers, and screws, is used to secure the meter firmly to a panel.
6. Иштөө нускамалары
Once installed and wired correctly, operating the uxcell 91C4 voltage gauge is straightforward:
- Күчтү колдонуу: Turn on the power supply to the DC circuit being monitored.
- Өлчөөнү окуу: The meter's needle will move across the scale to indicate the current DC voltage. Read the value directly from the scale.
- Observe Range: Ensure the needle remains within the 0-10V range. Continuous operation above the maximum rated voltagэсептегичке зыян келтириши мүмкүн.
4-сүрөт: Жакын план view of the meter's face, emphasizing the clear voltage scale, the red needle, and the model markings. This detailed view assists users in accurately reading the measured voltage.
7. Техникалык тейлөө
The uxcell 91C4 voltage gauge requires minimal maintenance:
- Тазалоо: Wipe the meter's front panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Текшерүү: Periodically check the wiring connections for tightness and signs of corrosion.
- Курчап турган чөйрө: Ensure the operating environment remains within suitable conditions (e.g., avoid extreme temperatures or humidity).
8. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Meter needle does not move. | No power to the circuit; incorrect wiring; meter malfunction. | Verify power supply; check wiring for correct polarity and secure connections; if issues persist, meter may be faulty. |
| Meter needle shows incorrect reading. | Incorrect wiring; meter calibration issue; external interference. | Recheck wiring; ensure the measured voltage is within the meter's range; if possible, compare with a known accurate voltmeter. |
| Meter needle is stuck or erratic. | Physical damage; internal component failure. | Inspect for visible damage; if internal, meter may need replacement. |
If troubleshooting steps do not resolve the issue, contact uxcell customer support.
9. Кепилдик жана колдоо
For warranty information and technical support, please refer to the uxcell official webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.
Байланыш маалыматы:
- зыярат кылыңыз uxcell Store on Amazon продукт маалымат жана колдоо үчүн.
- Refer to your product packaging or uxcell's official webкепилдиктин конкреттүү шарттары жана байланыш маалыматтары үчүн сайтка кириңиз.