wellye 5864137387

wellye RX23 12V Bluetooth Remote Control and Receiver Kit User Manual

Модель: 5864137387

1. Киришүү жана шайкештик

This manual provides detailed instructions for the installation, operation, and maintenance of the wellye RX23 12V Bluetooth Remote Control and Receiver Kit, designed for children's electric ride-on cars. Please read this manual thoroughly before use to ensure proper functionality and safety.

1.1 Шайкештикти текшерүү

To ensure this control box fits your specific ride-on car, open the existing control box in your electric ride-on car and compare its appearance and model number. This kit is compatible if the appearance and the model number (RX23 12V) match your original unit.

wellye RX23 12V Bluetooth Remote Control and Receiver Kit

Сүрөт 1.1: Бүттүview of the wellye RX23 12V Bluetooth Remote Control and Receiver Kit, showing both the remote control and the receiver unit.

Close-up of the wellye RX23 12V receiver unit

Сүрөт 1.2: Жакын пландан view of the wellye RX23 12V receiver unit, highlighting its connectors and casing.

wellye RX23 12V receiver unit with model label

Image 1.3: The wellye RX23 12V receiver unit, showing the "RX23 12V" label on its side, crucial for compatibility verification.

2. Коопсуздук маалыматы

For external use only. Keep away from naked flame or direct heat sources. This product is intended for use with children's ride-on toys. Adult supervision is recommended during installation and operation.

3. Орнотуу жана орнотуу

3.1 Алыстан башкаруунун батареясын орнотуу

The remote control requires two AAA 1.5V batteries. Use a Phillips screwdriver to unscrew the screw on the back of the remote control. Open the battery cover, install the batteries, ensuring correct positive (+) and negative (-) polarity, then close the battery cover and secure the screw.

  • Эски жана жаңы батарейкаларды аралаштырбаңыз.
  • Ар кандай типтеги батареяларды аралаштырбаңыз.
  • Remove exhausted batteries from the remote control promptly.
Back of the remote control with battery compartment instructions

Сүрөт 3.1: Арткы view of the remote control, showing the battery compartment and basic operation instructions.

3.2 Frequency Matching (Pairing)

Frequency matching is required for the first use or after replacing the remote control batteries. If the matching is unsuccessful, turn off the car's power and repeat steps 2 and 3.

  1. Install two AAA 1.5V batteries into the remote control, observing correct polarity. The indicator light will flash three times, confirming correct battery installation.
  2. Press and hold the frequency key (often labeled "car select" or "S") on the remote control for approximately 2 seconds. The indicator light on the remote will begin to flash.
  3. Turn on the power supply of the ride-on car. The indicator light on the remote control will turn off, indicating successful frequency matching.
  4. If the indicator light does not turn off, the matching was unsuccessful. Turn off the car's power and repeat steps 2 and 3.

4. Иштөө нускамалары

Once the remote control and receiver are successfully paired, you can operate the ride-on car using the remote control. The remote control will enter power-saving mode if not operated for 10 seconds, and the indicator light will turn off.

4.1 Алыстан башкаруу баскычынын Сүрөттөмөсү

Close-up of the wellye remote control buttons

Сүрөт 4.1: Жакын пландан view of the wellye remote control, showing the various control buttons.

  • ▲ (Өйдө жебе): Унааны алдыга жылдырат.
  • ▼ (Төмөн карай жебе): Унааны артка жылдырат.
  • ◀ (Left Arrow): Унааны солго бурат.
  • ▶ (Right Arrow): Унааны оңго бурат.
  • S (Speed/Select): Controls speed settings or acts as the frequency matching button.
  • P (Emergency Brake): Press this button to engage the emergency brake. The car's running function will stop. Press again to release.

5. Техникалык тейлөө

Regular maintenance ensures the longevity and proper functioning of your remote control and receiver kit.

  • Батареяга кам көрүү: Always use fresh batteries of the same type. Remove batteries if the remote control will not be used for an extended period to prevent leakage.
  • Тазалоо: Пультту жана кабыл алгычты кургак, жумшак чүпүрөк менен сүртүңүз. Катуу химиялык заттарды же абразивдүү тазалоочу каражаттарды колдонбоңуз.
  • Сактагыч: Комплектти күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.

6. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Remote control not responding / Car not moving
  • Батареялар өлүп калган же туура эмес орнотулган.
  • Remote control is not paired with the car.
  • Унаанын кубаты өчүк.
  • Туура полярдуулукту камсыз кылуу менен батарейкаларды алмаштырыңыз.
  • Perform frequency matching (refer to Section 3.2).
  • Ensure the ride-on car's power switch is ON.
Remote control indicator light flashes continuously after battery installationFrequency matching is required.Perform frequency matching (refer to Section 3.2).
Remote control indicator light does not turn off after attempting frequency matchingFrequency matching failed.Turn off the car's power, then repeat steps 2 and 3 of the frequency matching process (Section 3.2).
Car moves erratically or in wrong directionWiring issue or faulty receiver.Verify all wiring connections to the receiver are secure and correctly installed. If issues persist, the receiver may be faulty and require replacement.

7. Техникалык шарттар

ӨзгөчөлүкДеталь
Модель номериWEELYE RX23 12V 7-pin single-side
Тtage12V
Байланыш2.4G Bluetooth
Алыстан башкаруунун батареялары2 x AAA 1.5V (киргизилген эмес)
Продукциянын өлчөмдөрү3.5 x 3.5 x 2 дюйм (Алуучу)
Элемент Салмагы4.7 унция
Өндүрүүчүжакшы

8. Кепилдик жана колдоо

For technical support or inquiries regarding this product, please contact wellye customer service. Refer to your purchase documentation for specific warranty details, as warranty terms may vary by retailer and region.

For more information about wellye products, visit the wellye brand store on Amazon.

© 2023 wellye. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.