1. Киришүү
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your uxcell Cooling Fan, model SF8025AT. Please read this manual thoroughly before using the product and retain it for future reference.
Figure 1: uxcell Cooling Fan SF8025AT (Front View)
2. Коопсуздук маалыматы
WARNING: To reduce the risk of electric shock, fire, or injury, read and follow all instructions carefully.
- Кубат менен камсыздоо күйөрмандын көлөмүнө дал келишин текшериңизtage (AC 110V/120V).
- Желдеткичти электр шнурунун же сайгычтын бузулушу менен иштетпеңиз.
- Иштеп жаткан учурда манжаларды жана башка нерселерди желдеткичтин пляждарынан алыс кармаңыз.
- Install the fan in a well-ventilated area.
- Тазалоодон же тейлөөдөн мурун электр энергиясын өчүрүңүз.
- This product is designed for specific applications; consult a professional if unsure about compatibility.
3. Пакеттин мазмуну
Пакетте бардык компоненттер бар экенин текшериңиз:
- 1 x uxcell Cooling Fan SF8025AT
- (Mounting screws and other accessories may be sold separately or included depending on the specific retail package.)
4. Техникалык шарттар
Technical specifications for the uxcell Cooling Fan SF8025AT:
| Өзгөчөлүк | Спецификация |
|---|---|
| Модел | SF8025AT |
| Өлчөмдөрү (L x W x Y) | 80 x 80 x 25mm (3.15" x 3.15" x 0.98") |
| Тешикке чейинки аралык | 73 x 73 мм |
| Тtage | AC 110V/120V |
| Номиналдуу ток | 0.1A |
| Киргизүү күчү | 15.4 Вт |
| Speed (R.P.M.) | 2500 R.P.M. (+/- 10%) |
| Аба агымы (CFM) | 0.5 CFM Макс. |
| Ызы-чуу деңгээли | 30 дБ-А |
| Подшипник түрү | Кош Бол Кылдат |
| Материал | Пластик |
| Салмагы | 216 г (7.62 унция) |
Figure 2: Fan Dimensions and Mounting Holes
5. Орнотуу жана орнотуу
Follow these steps for proper installation of your cooling fan:
- Даярдоо: Ensure the device where the fan will be installed is powered off and disconnected from the main power supply.
- Монтаждоо жери: Identify a suitable mounting location that allows for optimal airflow. The fan is designed for 80mm x 80mm mounting points.
- Багыты: Determine the desired airflow direction. Fans typically have an arrow indicating airflow direction on the side frame. Ensure the fan is oriented to draw air in or push air out as required by your system.
- Коопсуз орнотуу: Use appropriate screws (not included) to secure the fan to the mounting surface. Ensure the fan is firmly attached to prevent vibration and noise. The mounting hole distance is 73mm x 73mm.
- Кубат туташуу: Connect the fan's power cable to an AC 110V/120V power source. This fan typically uses a 2-wire connection for AC power. Ensure connections are secure and insulated.
- Акыркы текшерүү: Before restoring power, double-check all connections and ensure no wires are obstructing the fan blades.
Figure 3: uxcell Cooling Fan SF8025AT (Back View)
6. Иштөө нускамалары
Once installed, operating the uxcell Cooling Fan is straightforward:
- Күйгүзүү: Restore power to the device or system where the fan is installed. The fan should begin operating immediately.
- Ишти текшерүү: Observe the fan to ensure the blades are spinning freely and quietly. Check for proper airflow in the intended direction.
- Үзгүлтүксүз иштөө: This fan is designed for continuous operation to provide consistent cooling.
7. Техникалык тейлөө
Regular maintenance helps ensure optimal performance and longevity of your cooling fan:
- Тазалоо: Periodically inspect the fan blades and housing for dust accumulation. Dust can impede airflow and reduce cooling efficiency.
- Чаңды тазалоо: To clean, first disconnect the fan from its power source. Use a soft brush, compressed air, or a vacuum cleaner with a brush attachment to gently remove dust from the blades and grille. Do not use liquids or harsh chemicals.
- Текшерүү: Check for any signs of wear, such as loose wires or damaged blades. If any damage is found, discontinue use and replace the fan.
- Подшипникти тейлөө: The dual ball bearings are designed for long-term, maintenance-free operation. No lubrication is typically required.
8. Кыйынчылыктарды
If you encounter issues with your uxcell Cooling Fan, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| желдеткич айланбайт | No power supply; Loose connection; Damaged fan motor. | Check power source and connections. Ensure voltage matches fan requirements. If connections are secure and power is present, the fan may be faulty and require replacement. |
| Желдетүүчү ызы-чуу | Dust accumulation; Loose mounting screws; Obstruction; Worn bearings. | Clean fan blades and housing. Tighten mounting screws. Remove any obstructions. If noise persists, bearings may be worn, and the fan may need replacement. (Note: This model has a rated noise level of 30 dB-A, which is audible.) |
| Жетишсиз аба агымы | Dust accumulation; Incorrect orientation; Obstruction. | Clean fan blades and grille. Verify fan is oriented correctly for desired airflow. Remove any obstructions in the airflow path. |
9. Кепилдик жана колдоо
For warranty information or technical support, please refer to the uxcell official webсайтка же сатуучуга кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
Байланыш маалыматы:
- Бренд: uxcell
- Webсайт: Visit the uxcell Store on Amazon (жалпы продукт маалымат үчүн)