VANTRUE USB Hardwire Kit for Dash Cams (M2/N2 Series)

Introduction

This manual provides instructions for the installation and use of the VANTRUE USB Hardwire Kit. This kit is designed to provide a continuous power supply to your compatible dash cam or other devices, enabling features such as 24-hour parking surveillance and protecting your vehicle's battery from excessive discharge.

Продукт өзгөчөлүктөрү

• 24 саат бою унаа токтотуучу жайды көзөмөлдөө: Connects to constant power, allowing your dash cam to receive power and record for 24 hours even when the engine is off. This enables continuous parking surveillance.
• ACC Power Connection: ACC (Accessory) power supplies electricity when the key is in the ACC ON position and cuts power when the engine is off.
• Low Voltage Коргоо: Features automatic power-off when the voltage drops below 11.6V (for 12V systems) or 23.2V (for 24V systems) to prevent vehicle battery drain.
• 12V/24V Compatibility: Converts input voltage of 12-24V to an output of DC 5V, 1.5A. Compatible with both 12V and 24V vehicle electrical systems.
• Жогорку шайкештик: Compatible with VANTRUE M2/N2/N3/N2 Pro/X1/X1 Pro/X3 dash cams, radar detectors, mirror dash cams, GPS devices, and other products with a Mini USB port.

Техникалык шарттар

Орнотуу боюнча колдонмо

Follow these steps for proper installation of the hardwire kit:

1. Фузер кутусунун жайгашкан жерин аныктоо: Consult your vehicle's owner's manual to locate the fuse box.
2. Select a Suitable Fuse Slot: Choose a fuse slot that provides either constant power (for 24-hour parking surveillance) or ACC power (for power only when the engine is on).
3. Connect the Fuse Holder: Insert the appropriate fuse into one of the included fuse holders. Connect the red wire of the hardwire kit to the fuse holder.
4. Жерге туташуу: Locate a metal bolt near the fuse box for a ground connection. Loosen the bolt, attach the black wire (ground wire) of the hardwire kit, and tighten the bolt securely.
5. Кабель маршруту: Carefully route the Mini USB cable from the fuse box to your dash cam's mounting location, ensuring it does not interfere with vehicle operation or safety features.
6. Dash Camга туташуу: Plug the Mini USB connector into your dash cam's power port.

Сүрөт: бүттүview of the hardwire kit installation process within a vehicle.

Image: Detailed wiring diagram for connecting the hardwire kit to the vehicle's power source and a dash cam.

Image: Step-by-step visual guide on connecting the fuse holder to the power cable.

Иштөө нускамалары

Once installed, the hardwire kit will automatically provide power to your connected device based on your wiring choice:

• Constant Power Connection (for Parking Surveillance): If connected to a constant power source, the dash cam will receive continuous power, enabling 24-hour parking surveillance features (if supported by the dash cam).
• ACC Power Connection: If connected to an ACC power source, the dash cam will power on when the vehicle's ignition is in the ACC ON position and power off when the engine is turned off.

Low Voltage Коргоо

The hardwire kit includes an integrated low voltage protection feature to safeguard your vehicle's battery. If the vehicle battery voltage drops below a preset threshold (11.6V for 12V systems or 23.2V for 24V systems), the kit will automatically cut power to the connected device. This prevents complete battery discharge and ensures your vehicle can start.

Image: Visual representation of the low voltage коргоо өзгөчөлүгү.

Шайкештик

This hardwire kit is designed for high compatibility with various devices featuring a Mini USB port. It is specifically tested and recommended for the following VANTRUE dash cam models:

• VANTRUE M2
• VANTRUE N2
• VANTRUE N3
• VANTRUE N2 Pro
• VANTRUE X1
• VANTRUE X1 Pro
• VANTRUE X3

It also supports other devices such as radar detectors, mirror dash cams, and GPS units that utilize a Mini USB power input.

Image: Illustration of the hardwire kit's broad compatibility with different vehicle accessories.

Маанилүү коопсуздук маалыматы жана эскертүүлөр

Please read carefully before use:

1. Parking surveillance mode utilizes the vehicle's constant power, which places a load on the vehicle battery. Regular inspection of your vehicle battery is recommended.
2. Refrain from using parking surveillance mode if: you do not drive daily; daily driving is less than 1 hour; or your vehicle battery has been used for over 1 year, as this may lead to vehicle battery drain.
3. After using parking surveillance mode, the vehicle battery voltage may be low. Always start the engine to recharge the vehicle battery. Failure to do so may result in battery drain.
4. This product is not compatible with electric vehicles.
5. Improper installation can cause damage to the product or your vehicle. If you are unsure about the installation process, consult a professional.

Проблемаларды чечүү

• Түзмөк күйбөй жатат: Check all cable connections. Ensure the fuse is properly seated and not blown. Verify the vehicle's fuse box is supplying power to the chosen slot.
• Унаа токтотуучу жайлардын көзөмөлү иштебейт: Confirm the hardwire kit is connected to a constant power source. Check your dash cam settings to ensure parking mode is enabled.
• Vehicle battery draining: Review the important safety information regarding parking surveillance use. Ensure your vehicle battery is in good condition. The low voltage protection should prevent complete drain, but frequent or prolonged parking mode use without sufficient driving can still impact battery life.

Кепилдик жана колдоо

For warranty information and technical support, please refer to the official VANTRUE website or contact VANTRUE customer service directly. Keep your purchase receipt for warranty claims.