RYOBI 18-Volt ONE+ Hybrid Portable Fan (Model PCL811KIT) Instruction Manual

Introduction

Thank you for choosing the RYOBI 18-Volt ONE+ Hybrid Portable Fan. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your fan. Please read it thoroughly before use and retain it for future reference.

Коопсуздук маалыматы

ЭСКЕРТҮҮ: To reduce the risk of injury, always follow basic safety precautions when using this product.

• Keep away from children. This product is not a toy.
• Желдеткичти шнур же сайгыч бузулган менен иштетпеңиз.
• Avoid placing fingers or other objects through the fan guard.
• Ensure the fan is placed on a stable, level surface during operation.
• Тазалоодон же тейлөөдөн мурун электр энергиясын өчүрүңүз.

Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:

• RYOBI 18-Volt ONE+ Hybrid Portable Fan (Model PCL811KIT)
• 18-Volt Lithium-Ion Battery (P163, 2.00Ah)
• Батарея заряддагыч

Note: An extension cord is sold separately and is required for AC power operation. This fan is not a misting fan.

Жайгашуу

1. Батареяны орнотуу

1. Вентилятор өчүрүлгөнүн текшериңиз.
2. Locate the battery port on the base of the fan.
3. Align the 18-Volt Lithium-Ion Battery with the battery port and slide it in until it clicks securely into place.
4. To remove the battery, press the release latches on the sides of the battery and slide it out.

2. AC Power Connection (Hybrid Operation)

1. Вентилятор өчүрүлгөнүн текшериңиз.
2. Locate the AC power port on the fan.
3. Insert a compatible extension cord (sold separately) into the AC power port.
4. Plug the other end of the extension cord into a standard 120V AC outlet.
5. The fan will automatically switch to AC power when connected, conserving battery life.

Image: The RYOBI 18-Volt ONE+ Hybrid Portable Fan, showing its main components including the fan unit, battery, and charger.

Иштөө нускамалары

1. Күйгүзүү/өчүрүү жана ылдамдыкты көзөмөлдөө

1. To turn the fan on, rotate the variable speed dial located on the front base of the fan clockwise.
2. Continue rotating the dial clockwise to increase the fan speed. The fan offers variable speeds up to 2100 RPM.
3. To decrease the fan speed, rotate the dial counter-clockwise.
4. To turn the fan off, rotate the dial fully counter-clockwise until it clicks into the OFF position.

2. Adjusting Fan Head Angle

The fan head can be manually tilted to direct airflow as needed. Gently grasp the fan housing and adjust it to the desired angle. The fan head will hold its position once set.

Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө оптималдуу иштөөнү камсыз кылат жана желдеткичиңиздин иштөө мөөнөтүн узартат.

• Тазалоо: Disconnect the fan from all power sources (battery and AC cord) before cleaning. Use a soft, damp cloth to wipe down the exterior surfaces. Do not immerse the fan in water or use abrasive cleaners.
• Сактагыч: When not in use, store the fan in a clean, dry place, away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods.
• Батареяга кам көрүү: Always use the RYOBI-approved charger for the 18-Volt Lithium-Ion Battery. Do not expose batteries to water or extreme heat.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

This RYOBI product comes with a 30 күндүк чектелген кепилдик from the manufacturer. For warranty claims, technical assistance, or to purchase replacement parts, please refer to the official RYOBI webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз.

Кепилдикти текшерүү үчүн сатып алганыңыздын далилин сактап коюңуз.