Monoprice 133833 Immersive Satellite Speakers User Manual

1. Киришүү

Сатып алганыңыз үчүн рахматasing the Monoprice 133833 Immersive Satellite Speakers. These speakers are designed to enhance your home cinema experience by providing multi-dimensional sound, fully compatible with standard and Dolby Atmos receivers. This manual provides essential information for the safe and optimal use of your new speakers.

2. Коопсуздук маалыматы

Бул продуктуну колдонуудан мурун бардык коопсуздук көрсөтмөлөрүн окуп чыгып, түшүнүп алыңыз. Келечекте колдонуу үчүн бул колдонмону сактап коюңуз.

Электр коопсуздугу: Do not expose the speakers to water or moisture. Ensure all connections are secure before powering on your audio system.
Жайгашкан жери: Place speakers on a stable, level surface to prevent tipping. Avoid placing near heat sources or in direct sunlight.
Вентиляция: Динамиктердин айланасында жетиштүү аба айланышын камсыз кылыңыз. Желдетүүчү тешиктерди жаппаңыз.
Тазалоо: Disconnect from power before cleaning. Use a soft, dry cloth. Do not use liquid cleaners or aerosols.
Тейлөө: Do not attempt to service this product yourself. Refer all servicing to qualified personnel.
Үн деңгээли: Үндүн катуулугун узак убакыт бою сактоо угуунун туруктуу бузулушуна алып келиши мүмкүн. Үндү тууралоодо этият болуңуз.

3. Пакеттин мазмуну

Please ensure all items are present and in good condition. If any items are missing or damaged, contact Monoprice customer support.

2x Monoprice 133833 Immersive Satellite Speakers
1x Колдонуучунун колдонмосу (бул документ)

4. Продукциянын өзгөчөлүктөрү

The Monoprice 133833 speakers are designed with advanced features for an enhanced audio experience:

Имерсивдүү үн: Upward-firing drivers project sound towards the ceiling, which then reflects down into the listening area, creating a 3D audio space. This design is fully compatible with Dolby Atmos enabled receivers and audio tracks.
Компакт өлчөмү: Each speaker measures approximately 11.4 x 26.7 x 13.5 cm (4.5 x 10.5 x 5.3 inches) and weighs about 2.26 kg (5 lbs), making them suitable for various room setups.
High-Quality Drivers: Features a 3/4-inch aluminum dome tweeter and a 3-inch polypropylene woofer for clear highs and rich lows. An additional 3-inch polypropylene driver is used for the immersive height channel.
Кубат менен иштөө: Capable of handling up to 100 watts of input power.
Байланыш: Equipped with binding post connectors for secure and reliable speaker wire connections.

Monoprice 133833 Immersive Satellite Speaker, front view

Сүрөт 4.1: Алдыңкы view of a Monoprice 133833 Immersive Satellite Speaker, showing the main drivers and the upward-firing driver on top.

5. Орнотуу

5.1 Спикерди жайгаштыруу

For optimal immersive sound, place the speakers on top of your front left and right main speakers, or on a stable surface at the front of your listening area. Ensure the upward-firing drivers are unobstructed and facing the ceiling. The ceiling should be flat and reflective for the best effect.

Figure 5.1: A pair of Monoprice 133833 Immersive Satellite Speakers, designed for placement on existing speakers or stands.

5.2 Динамиктерди туташтыруу

These speakers connect to your AV receiver's height channels (e.g., Front Height, Top Front, or Dolby Atmos Enabled Speaker outputs) using standard speaker wire. Each speaker features two sets of binding posts: one for the main drivers and one for the upward-firing immersive driver.

Identify the speaker wire terminals on your AV receiver for the height channels.
Prepare your speaker wires by stripping approximately 1/2 inch (1.2 cm) of insulation from the ends.
Connect the positive (+) terminal of the speaker to the positive (+) terminal of the corresponding height channel on your receiver.
Connect the negative (-) terminal of the speaker to the negative (-) terminal of the corresponding height channel on your receiver.
Ensure all connections are tight and that there are no stray wire strands that could cause a short circuit.

Арткы view of Monoprice 133833 speaker showing binding posts

Figure 5.2: Rear panel of the speaker, illustrating the dual binding post connections for the main and immersive drivers.

Note on Impedance: The speakers have an impedance of 8 Ohms. Ensure your receiver is compatible with this impedance. If your receiver has settings for speaker impedance, select the appropriate setting.

6. Иштөө нускамалары

Once connected, operate the speakers through your AV receiver. Refer to your receiver's manual for specific instructions on configuring height channels and Dolby Atmos settings.

Алуучу конфигурациясы: Access your AV receiver's setup menu. Configure the speaker setup to include "Dolby Atmos Enabled Speakers" or "Front Height" speakers, depending on your receiver's options.
Калибрлөө: Use your receiver's automatic room calibration system (e.g., Audyssey, MCACC, YPAO) to optimize sound levels and delays for your listening environment.
Булак материалы: For the full immersive experience, use audio content encoded with Dolby Atmos or DTS:X. The speakers will also enhance standard surround sound formats.

7. Техникалык тейлөө

Бул динамиктер узак мөөнөттүү иштешин камсыз кылуу үчүн минималдуу тейлөөнү талап кылат.

Тазалоо: Dust the speaker cabinets regularly with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents.
Торлор: Зарыл болсо, динамиктин торчолорун тазалоо үчүн этияттык менен алып салууга болот. Чаңды кетирүү үчүн жумшак щетканы же щетка тиркемеси бар чаң соргучту колдонуңуз.
Курчап турган чөйрө: Avoid exposing the speakers to extreme temperatures, humidity, or direct sunlight, which can degrade materials over time.

7.1-сүрөт: Каптал view of the speaker with its protective grille installed.

8. Кыйынчылыктарды

If you experience issues with your speakers, refer to the following troubleshooting guide:

Көйгөй	Мүмкүн себеп	Чечим
Динамиктерден үн жок	Бошоң динамик зым байланыштары. Алуучунун туура эмес жөндөөлөрү. Receiver not powered on or in standby.	Check and secure all speaker wire connections at both the speaker and receiver. Verify speaker configuration in your AV receiver's menu. Ensure receiver is powered on and the correct input is selected.
Бурмаланган же түшүнүксүз үн	Динамиктин зымы бузулган. Overdriven ampөмүрлүү. Incorrect speaker impedance setting on receiver.	Динамик зымдарынын бузулгандыгын текшериңиз; зарыл болсо, алмаштырыңыз. Үн деңгээлин азайтыңыз. Check receiver's impedance settings.
No immersive (height) effect	Incorrect receiver setup for height channels. Non-Dolby Atmos/DTS:X source material. Obstruction of upward-firing driver.	Ensure receiver is configured for Dolby Atmos Enabled speakers or height channels. Play content with Dolby Atmos or DTS:X encoding. Ensure nothing is blocking the top of the speaker.

9. Техникалык шарттар

Detailed technical specifications for the Monoprice 133833 Immersive Satellite Speakers:

Модель номери	133833
Динамик түрү	Satellite, Dolby Atmos Enabled
Вуфер	3-inch Polypropylene
Tweeter	3/4-inch Aluminum Dome
Immersive Driver	3-inch Polypropylene (upward-firing)
Power Handling	100 Watts (Maximum Input)
Сезимталдуулук	88 дБ
Импеданс	8 Ом
Байланыш	Байланыш посту
Өлчөмдөрү (H x W x D)	11.4 x 26.7 x 13.5 см (4.5 x 10.5 x 5.3 дюйм)
Салмагы (ар бири)	Болжол менен 2.26 кг (5 фунт)
Материал	Aluminum (tweeter dome), Polypropylene (woofers)
Түс	Кара

10. Кепилдик жана колдоо

Monoprice stands behind its products with comprehensive warranty and support services.

1 жылдык алмаштыруу кепилдиги: This product is covered by a 1-year replacement warranty from the date of purchase.
30 күндүк акчаны кайтарып берүү кепилдиги: If you are not completely satisfied with your purchase, you may return it within 30 days for a full refund.
Кардарларды колдоо: For technical assistance, warranty claims, or other inquiries, please visit the official Monoprice webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз.

Моноприз 133833