Surge Switchpad Pro Wireless Controller User Manual

Introduction

This manual provides instructions for the Surge Switchpad Pro Wireless Controller, designed for use with the Nintendo Switch. It covers essential information regarding setup, operation, maintenance, and troubleshooting to ensure optimal performance and user experience.

Сүрөт: алдыңкы view of the Surge Switchpad Pro Wireless Controller in blue, with its included USB-C charging cable.

Пакеттин мазмуну

• Surge Switchpad Pro Wireless Controller
• USB-C заряддоо кабели
• User Manual

Контроллердин өзгөчөлүктөрү

• 6-огу менен кыймылды башкаруу: Compatible with motion-sensing games.
• 4 Macro Buttons: Programmable rear paddle buttons for custom button combos.
• Кайра заряддалуучу 550 мАч батарея: Provides up to 12 hours of gameplay.
• Турбо функциясы: Assign Turbo to any face button or trigger.
• Зымсыз туташуу: Bluetooth connectivity for stable connection up to 25ft.

Image: Diagram highlighting key features of the Surge Switchpad Pro: Bluetooth Connection, Rumble Feedback, and Rechargeable battery.

Жайгашуу

Контроллерди заряддоо

Before initial use, fully charge the controller. Connect the included USB-C cable to the controller's USB-C port and the other end to a USB power source (e.g., Nintendo Switch dock, computer, or USB wall adapter).

Сүрөт: асты view of the Surge Switchpad Pro, showing the USB-C charge port located between the R1 and L1 buttons.

The LED player indicators on the front of the controller will illuminate during charging and turn off when fully charged.

Nintendo Switch менен жупташтыруу

1. From the Nintendo Switch HOME Menu, select 'Controllers'.
2. Select 'Change Grip/Order'.
3. On the Surge Switchpad Pro, press and hold the SYNC button (usually a small button on the top edge or back) for a few seconds until the LED player indicators begin to flash rapidly.
4. Once the controller is successfully paired, the player indicator(s) corresponding to its assigned player number will remain lit.

Иштөө нускамалары

Негизги башкаруу элементтери

The Surge Switchpad Pro features standard Nintendo Switch controller button layouts, including A/B/X/Y buttons, directional pad, left and right analog sticks, L/R/ZL/ZR shoulder buttons, and Home, Capture, Plus (+), and Minus (-) buttons.

Image: A person holding and using the Surge Switchpad Pro Wireless Controller during gameplay.

Макро баскычтарын программалоо

The 4 macro buttons (typically located on the rear of the controller) can be programmed to execute a sequence of button presses. Refer to the specific instructions provided with your controller for detailed programming steps, as this may vary slightly.

Турбо функциясын активдештирүү

To activate Turbo functionality for a button:

1. басып, кармап туруңуз Турбо баскычы.
2. While holding Turbo, press the desired button (e.g., A, B, X, Y, L, R, ZL, ZR) you wish to assign Turbo functionality to.
3. Release both buttons. The assigned button will now rapidly repeat its input when held down.

To deactivate Turbo for a button, repeat the process. To clear all Turbo settings, press and hold the Turbo button for 5 seconds.

Image: Close-up of the Surge Switchpad Pro showing the four LED player indicators below the Home button.

Техникалык тейлөө

Тазалоо

• Use a soft, dry cloth to wipe the controller.
• өжөр кир үчүн, бир аз гampчүпүрөктү суу же жумшак тазалоо эритмеси менен жууп салыңыз. Катуу химиялык заттардан алыс болуңуз.
• Суюктуктардын контроллердин тешиктерине киришине жол бербеңиз.

Сактагыч

• Контроллерди түз күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
• Узак мөөнөткө сактасаңыз, анын иштөө мөөнөтүн узартуу үчүн батареянын жарым-жартылай заряддалганын (болжол менен 50%) текшериңиз.

Проблемаларды чечүү

Контроллер туташпай/жупташпай жатат

• Контроллердин толук заряддалганын текшериңиз.
• Verify that the Nintendo Switch is updated to the latest system software.
• Try re-pairing the controller by following the 'Pairing with Nintendo Switch' steps in the Setup section.
• If multiple controllers are paired, try disconnecting other controllers from the Switch settings.
• Nintendo Switch консолуңузду өчүрүп-күйгүзүңүз.

Киргизүүнүн кечигиши же ажыратуулар

• Ensure you are within the 25ft wireless range of the Nintendo Switch.
• Minimize interference from other wireless devices (e.g., Wi-Fi routers, microwaves).
• Ensure the controller is fully charged. Low battery can affect wireless performance.

Баскычтар жооп бербейт

• Контроллер туура жупташтырылганын жана туташтырылганын текшериңиз.
• Restart the controller by holding the Home button for 10 seconds, then pressing it again to turn it back on.
• If a specific button is stuck, gently clean around it to remove any debris.

Техникалык шарттар

Кепилдик жана колдоо

Information regarding product warranty and customer support was not available in the provided product data. Please refer to the product packaging or the official Surge website for warranty details and support contact information.