GÜDE 55369

GÜDE 55369 GHF 800 Manual Tile Cutter Instruction Manual

Модель: 55369

Introduction

This manual provides essential instructions for the safe and effective use of the GÜDE 55369 GHF 800 Manual Tile Cutter. Please read these instructions carefully before assembly, operation, or maintenance. Keep this manual for future reference.

Коопсуздук нускамалары

Always prioritize safety when operating any tools. Failure to follow these instructions may result in injury or damage to the tool.

  • Тиешелүү жеке коргоочу шаймандарды (ЖКК), анын ичинде коопсуздук көз айнектерин жана кол каптарды кийиңиз.
  • Ensure the work surface is stable, level, and clean.
  • Балдарды жана жанында жүргөндөрдү жумуш аймагынан алыс кармаңыз.
  • Inspect the tile cutter for any damage before each use. Do not use if damaged.
  • Handle tiles carefully; edges can be sharp after cutting.
  • Do not force the cutting wheel. Apply steady, even pressure.
  • Ensure the tile is properly secured on the anti-slip support before cutting.

Компоненттер бүттүview

Familiarize yourself with the parts of your GÜDE GHF 800 Manual Tile Cutter.

GÜDE GHF 800 Manual Tile Cutter with key components labeled
1-сүрөт: Бүттүview of the GÜDE GHF 800 Manual Tile Cutter. This image displays the full tile cutter, highlighting its main parts such as the cutting handle, guide rail, base plate, and tile supports.
  • Cutting Handle: Эргономикалык жактан ыңгайлуу иштөө үчүн иштелип чыккан.
  • Кесүүчү дөңгөлөк: Hardened tungsten carbide wheel for precise scoring.
  • Жетектөөчү темир жол: Provides a stable path for the cutting head.
  • Негизги плита: Stable aluminum base for secure tile placement.
  • Anti-slip Support: Ensures the tile remains stationary during cutting.
  • Adjustable Stop/Angle Guide: For precise measurement and angled cuts.
  • Fold-out Tile Supports: Extendable supports on both sides for larger tiles.

Жайгашуу

Before using the tile cutter, ensure it is properly set up.

  1. Пакеттен чыгаруу: Таңгактан бардык компоненттерди этияттык менен алып салыңыз. Жеткирүүдө кандайдыр бир бузулуулар бар-жогун текшериңиз.
  2. Жайгашкан жери: Place the tile cutter on a stable, flat, and clean work surface. Ensure there is enough space around the cutter for safe operation and tile handling.
  3. Extend Tile Supports: For larger tiles, unfold the side tile supports (30 cm each) to provide additional stability.
    Close-up of the fold-out tile support on the GÜDE GHF 800 Manual Tile Cutter
    2-сүрөт: Fold-out tile support. This image shows one of the side supports extended, providing additional surface area for larger tiles.
  4. Adjustable Stop: Position the adjustable stop according to the desired tile dimension. Secure it firmly.
    GÜDE GHF 800 Manual Tile Cutter with a tile placed, showing the adjustable stop and maximum tile size
    3-сүрөт: Tile placement and adjustable stop. This image illustrates a tile positioned on the cutter, with the adjustable stop set for a precise cut, indicating a maximum tile size of 80x80 cm.

Операция

Follow these steps for effective and safe tile cutting.

  1. Плитканы даярдаңыз: Clean the tile surface. Mark the desired cut line clearly with a pencil or marker.
  2. Плитканы жайгаштыруу: Place the tile on the base plate, aligning the marked cut line with the cutting wheel's path. Ensure the tile rests firmly against the anti-slip support and the adjustable stop.
    Close-up of a tile being positioned on the GÜDE GHF 800 Manual Tile Cutter for a straight cut
    4-сүрөт: Tile positioning for a straight cut. This image shows a tile correctly placed on the cutter, ready for the scoring process.
  3. Плиткага упай топтоңуз:
    • Position the cutting wheel at the edge of the tile furthest from you.
    • Apply firm, consistent downward pressure on the cutting handle.
    • Push the cutting handle smoothly and steadily across the tile towards you in a single, continuous motion. Do not make multiple passes. A distinct scoring sound should be heard.
      • Close-up of the cutting head and wheel scoring a tile on the GÜDE GHF 800 Manual Tile Cutter
      5-сүрөт: Scoring the tile. This image focuses on the cutting wheel as it scores a line across the tile surface.
  4. Плиткаларды сындырыңыз:
    • Once the tile is scored, position the breaking foot (part of the cutting head) directly over the scored line, near the edge of the tile closest to you.
    • Apply quick, firm downward pressure on the cutting handle. The tile should snap cleanly along the scored line.
    • For diagonal cuts, use the angle guide and ensure the tile is securely placed.
      • GÜDE GHF 800 Manual Tile Cutter performing a diagonal cut on a tile
      6-сүрөт: Performing a diagonal cut. This image demonstrates the tile cutter being used to make an angled cut on a tile.
  5. Бүтүрүү: Carefully remove the cut tile pieces. Edges may be sharp and may require light sanding or filing for a smooth finish.

Техникалык тейлөө

Regular maintenance ensures the longevity and performance of your tile cutter.

  • Тазалоо: After each use, clean the base plate, guide rails, and cutting head to remove tile dust and debris. Use a dry cloth or brush.
  • Майлоо: Periodically apply a light lubricant to the guide rails and the cutting wheel axle to ensure smooth operation.
  • Кесүүчү дөңгөлөк: The tungsten carbide cutting wheel is durable but will eventually wear out. Replace the cutting wheel when cuts become inconsistent or require excessive force.
    Close-up of the hardened cutting wheel and ergonomic handle of the GÜDE GHF 800 Manual Tile Cutter
    7-сүрөт: Hardened cutting wheel and ergonomic handle. This image provides a detailed view of the durable cutting wheel and the comfortable grip of the handle.
  • Сактагыч: Store the tile cutter in a dry, clean place, away from direct sunlight and extreme temperatures.

Проблемаларды чечүү

Жалпы маселелер жана алардын чечимдери үчүн бул бөлүмдү караңыз.

КөйгөйМүмкүн себепЧечим
Uneven or jagged cuts
  • Insufficient or inconsistent scoring pressure.
  • Worn or damaged cutting wheel.
  • Tile not properly secured.
  • Multiple scoring passes.
  • Apply firm, consistent pressure in a single pass.
  • Кесүүчү дөңгөлөктү алмаштырыңыз.
  • Ensure tile is flush against supports and stop.
  • Score only once.
Tile does not break cleanly
  • Insufficient scoring depth.
  • Breaking foot not aligned with score line.
  • Tile material too hard or thick for the tool.
  • Increase scoring pressure.
  • Ensure breaking foot is centered on the score.
  • Verify tile thickness is within specifications (max 12mm).
Cutting head sticks or moves roughly
  • Accumulation of dust or debris on guide rails.
  • Майлоонун жетишсиздиги.
  • Clean guide rails thoroughly.
  • Apply a light lubricant to the guide rails.

Техникалык шарттар

ӨзгөчөлүкДеталь
Модель номери55369
Максималдуу кесүү узундугу800 мм (80 см)
Maximum Tile Dimensions800 x 800 mm (for diagonal cuts)
Maximum Tile Thickness12 мм
Дөңгөлөктүн диаметри22 мм
Cutting Wheel MaterialВольфрам карбиди
Негизги плитанын материалыАлюминий
Продукциянын өлчөмдөрү (L x W x Y)105.4 x 86 x 39 см
Элемент Салмагы7.4 килограмм
Handle MaterialПолипропилен
Сунушталган бетCeramic, Porcelain
Power SourceКол менен иштейт

Кепилдик жана колдоо

Кепилдик маалыматы же техникалык колдоо үчүн өндүрүүчүнүн расмий өкүлүнө кайрылыңыз webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.

Manufacturer: GÜDE GmbH & Co.KG

Contact information can typically be found on the product packaging or the official GÜDE webсайт.

© 2026 GÜDE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.