Itek SIISBE 3.0 Gaming PC Case Instruction Manual

1. Продукт бүтүп калдыview

The Itek SIISBE 3.0 is a gaming middle tower PC case designed to combine high-level features with a modern aesthetic. It features a fully perforated front panel for optimal airflow and a tempered glass side panel with a convenient hinged closure, allowing for easy access and showcasing your internal components.

The case comes equipped with three 12 cm ARGB fans: two located at the front and one at the rear. These fans can be controlled via a dedicated button on the front panel or through your motherboard's ARGB software, providing customizable lighting effects and efficient cooling.

1-сүрөт: алдыңкы жагы view of the Itek SIISBE 3.0 Gaming PC Case, showcasing the perforated front panel and tempered glass side panel.

The SIISBE 3.0 supports a wide range of hardware, including ATX, Micro-ATX, and Mini-ITX motherboards. It accommodates graphics cards up to 315 mm in length, CPU coolers up to 160 mm in height, and liquid cooling radiators up to 280 mm. The case also offers 28 mm of space for efficient cable management, ensuring a clean and organized build.

2. Орнотуу жана орнотуу

2.1 Ишти даярдоо

• Кутучаны ачып, бардык таңгактоочу материалдарды алып салыңыз.
• Open the tempered glass side panel by gently pulling it open from the hinge.
• Locate the accessory box inside the case, which contains screws and other mounting hardware.

2.2 Motherboard орнотуу

• Install the necessary standoffs for your motherboard form factor (ATX, Micro-ATX, or Mini-ITX) onto the motherboard tray.
• Этияттык менен энелик платаңызды буроо тешикчелерин тегиздеп, стендтерге жайгаштырыңыз.
• Берилген бурамалар менен энелик тактаны бекитиңиз.

2-сүрөт: Ички view of the Itek SIISBE 3.0, highlighting the motherboard mounting area and cable routing options.

2.3 Электр менен камсыздоо блогун (PSU) орнотуу

• Mount the PSU in the dedicated bottom compartment of the case.
• PSUну корпустун артындагы бурамалар менен бекитиңиз.

2.4 Сактоочу дискти орнотуу

• Install 2.5-inch SSDs or 3.5-inch HDDs into the designated internal bays. Refer to the case's internal layout for specific mounting points.
• Secure drives with the appropriate screws.

Сүрөт 3: Арткы ички view of the Itek SIISBE 3.0, showing the motherboard tray, SSD mounting points, and ampКабелди башкаруу үчүн мейкиндик.

2.5 Видеокартаны жана кеңейтүү картасын орнотуу

• Корпустун артындагы керектүү кеңейтүү уячасынын капкактарын алып салыңыз.
• Графикалык картаңызды же башка кеңейтүү карталарыңызды энелик платаңыздагы PCIe уячаларына салыңыз.
• Secure the cards with screws. The case supports graphics cards up to 315 mm in length.

2.6 Муздатуу системасын орнотуу

• The case includes three 12 cm ARGB fans (two front, one rear). Connect their power and ARGB cables to the motherboard or the integrated fan controller.
• For additional cooling, install extra fans or a liquid cooling radiator (up to 280 mm) in the designated mounting points.
• Install your CPU cooler. The case supports CPU coolers up to 160 mm in height.

Figure 4: The Itek SIISBE 3.0 with its hinged tempered glass panel open, revealing the pre-installed ARGB fans and internal layout.

2.7 Кабелди башкаруу

• Utilize the 28 mm cable management space behind the motherboard tray to route and organize all power and data cables.
• Use cable ties (not included) to secure cables and maintain optimal airflow.

3. Иштөө нускамалары

3.1 Күйгүзүү

• Ensure all components are correctly installed and connected.
• Кубат кабелин электр камсыздоочу түзүлүшкө жана розеткага туташтырыңыз.
• Press the power button located on the top I/O panel of the case to start your system.

3.2 ARGB Fan Control

• The pre-installed ARGB fans can be controlled via the dedicated LED control button on the front panel. Press the button to cycle through various lighting modes and colors.
• Alternatively, if the fans are connected to an ARGB header on your motherboard, you can use the motherboard's proprietary software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) to synchronize and customize the lighting effects.

3.3 Алдыңкы киргизүү/чыгаруу порттору

• The front I/O panel includes USB 3.0 and USB 2.0 ports for connecting peripherals and external storage devices.
• Audio jacks are also available for headphones and microphones.

4. Техникалык тейлөө

4.1 Чаң чыпкасын тазалоо

• The SIISBE 3.0 case is equipped with dust filters to prevent dust buildup inside. Regularly check and clean these filters.
• Gently remove the dust filters (typically located on the top, front, and/or bottom) and clean them with compressed air or by rinsing them with water. Ensure they are completely dry before re-installing.

4.2 Жалпы тазалоо

• жумшак колдонуу, damp cloth to wipe down the exterior surfaces of the case, including the tempered glass panel. Avoid abrasive cleaners.
• For internal cleaning, use compressed air to remove dust from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.

5. Кыйынчылыктарды

This section provides general troubleshooting tips for common issues. For more specific problems, consult the manuals for your individual PC components (motherboard, PSU, GPU, etc.) or contact Itek support.

5.1 Система күйбөйт

• Электр байланыштарын текшерүү: Ensure the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position. Verify all internal power cables (24-pin ATX, 8-pin CPU, PCIe, SATA) are securely connected to the motherboard and components.
• Алдыңкы панелдин туташтыргычтары: Confirm that the front panel power switch cable is correctly connected to the motherboard's front panel header.

5.2 Fans Not Spinning / ARGB Not Working

• Желдеткич туташуулары: Verify that the fan power cables are securely connected to the motherboard fan headers or the integrated fan controller.
• ARGB Connections: Ensure ARGB cables are correctly connected to the motherboard's ARGB header or the case's ARGB controller.
• Software/Button Control: If using the case's LED button, try pressing it to cycle modes. If using motherboard software, ensure it is installed and configured correctly.

5.3 Ашыкча ысып кетүү маселелери

• Аба агымы: Ensure fans are installed in the correct orientation for optimal airflow (front fans typically intake, rear/top fans exhaust).
• Чаңдын пайда болушу: Чаң чыпкаларын жана ички компоненттерди "Техникалык тейлөө" бөлүмүндө сүрөттөлгөндөй тазалаңыз.
• Кабелдик башкаруу: Improve cable routing to reduce obstructions to airflow.

6. Техникалык шарттар

7. Кепилдик маалыматы

Specific warranty details for the Itek SIISBE 3.0 PC Case may vary by region and retailer. Please refer to the warranty card included with your product or visit the official Itek webэң так жана актуалдуу кепилдик маалыматы үчүн сайт.

Сатып алганыңыздын далилин (дүмүрчөк же эсеп-дүмүрчөк) сактаңыз, анткени ал бардык кепилдик дооматтары үчүн талап кылынат.

8. Кардарларды колдоо кызматы

For technical assistance, product inquiries, or support regarding your Itek SIISBE 3.0 PC Case, please contact Itek customer support through their official channels.

• Официалдуу Webсайт: Visit the Itek official webколдоо булактары, көп берилүүчү суроолор жана байланыш маалыматы үчүн сайт.
• Электрондук почта колдоо: Look for a support email address on the Itek webсайт.
• Телефондук колдоо: Check the Itek webаймактык телефон колдоо номерлери үчүн сайт.

When contacting support, please have your product model (SIISBE 3.0) and item model number (ITGCASIB30) ready to help expedite the process.