1. Киришүү
The Mean Well SP-240-15 is a high-performance 240W single output power supply designed for various industrial and commercial applications. It features a universal AC input, built-in active Power Factor Correction (PFC) function, and forced air cooling by an integrated DC fan, ensuring reliable and efficient operation. This manual provides essential information for the safe installation, operation, and maintenance of your SP-240-15 power supply.
2. Коопсуздук нускамалары
Please read and understand all safety instructions before installing or operating the unit. Failure to comply with these instructions may result in electric shock, fire, or damage to the product.
- Кубатты өчүрүү: Always ensure the AC input power is disconnected before performing any installation, wiring, or maintenance procedures.
- Туура Жерге салуу: The unit must be properly grounded to prevent electric shock. Connect the FG (Frame Ground) terminal to earth ground.
- Квалификациялуу кадрларды: Орнотуу жана тейлөө квалификациялуу жана ыйгарым укуктуу персонал тарабынан гана аткарылышы керек.
- Вентиляция: Ensure adequate ventilation around the power supply. Do not block the fan or ventilation openings. Operating temperature range is -20°C to +70°C (refer to derating curve).
- Экологиялык шарттар: Do not operate the unit in environments with excessive moisture, dust, or corrosive gases.
- Чыгуу жүктөө: Do not exceed the rated output power or current. Overloading may cause damage or reduce the lifespan of the unit.
- Ички компоненттери: Электр жабдыгын ачпаңыз casinг. Ичинде колдонуучу тейлей турган бөлүктөр жок.
3. Продукт бүтүп калдыview
The Mean Well SP-240-15 power supply is designed for robust performance, featuring a durable metal enclosure and efficient cooling.

Негизги өзгөчөлүктөрү:
- Universal AC input / Full range (88 ~ 264VAC)
- Built-in active PFC function (PF>0.95 at 230VAC)
- Орнотулган DC желдеткич менен мажбурланган аба муздатуу
- Коргоо: кыска туташуу, ашыкча жүктөө, ашыкча томtage, Ашыкча температура
- 100% full load burn-in test for reliability
4. Орнотуу жана орнотуу
Proper installation is crucial for the safe and reliable operation of the SP-240-15 power supply.
4.1 Механикалык орнотуу
The unit should be mounted in a location that allows for adequate airflow around the fan and ventilation openings. Refer to the mechanical drawing for dimensions and mounting hole locations.

Өлчөмдөрү: 199mm (L) x 99mm (W) x 50mm (H) (7.83 x 3.9 x 1.97 inches).
4.2 Зымдарды туташтыруу
Connect the input and output wires to the terminal block as indicated on the unit's label and in the diagram below. Ensure all connections are secure and correct polarity is observed.
- AC киргизүү: Connect the Live (L), Neutral (N), and Frame Ground (FG) wires to the corresponding terminals. The unit accepts universal AC input from 88 to 264VAC.
- DC чыгаруу: Connect the positive (+V) and negative (-V) load wires to the DC OUTPUT terminals.
- Тtage Тууралоо: Output voltage can be adjusted using the '+V ADJ' potentiometer located near the output terminals. Use a small screwdriver for fine-tuning within the specified range (13.5V to 18V).
Терминал пин дайындоо:
- Pin 1: AC/L
- Pin 2: AC/N
- 3-түйүн: FG (Алкактык жер)
- 4-пин: DC OUTPUT -V
- 5-пин: DC OUTPUT -V
- 6-түйүн: DC OUTPUT +V
- 7-түйүн: DC OUTPUT +V
5. Иштөө нускамалары
Once properly installed and wired, the SP-240-15 power supply is ready for operation.
- Күйгүзүү: Apply AC input voltage to the unit. The internal fan will start operating, and the output voltage will be present at the DC output terminals.
- Output Voltage Текшерүү: Чыгуу көлөмүн текшериңизtage using a multimeter. Adjust the '+V ADJ' potentiometer if necessary to achieve the desired voltage 13.5Vден 18Vге чейинки диапазондо.
- Туташуу жүктөө: Connect your load to the DC output terminals. Ensure the load current does not exceed the rated 16A.
- PFC функциясы: The built-in active PFC function ensures high power factor and reduced harmonic distortion, optimizing energy efficiency.
6. Техникалык тейлөө
The Mean Well SP-240-15 is designed for long-term reliability with minimal maintenance. However, periodic checks can help ensure optimal performance.
- Тазалоо: Periodically inspect the unit for dust accumulation, especially on the fan and ventilation openings. Clean with a soft brush or compressed air to maintain proper cooling. Ensure power is disconnected before cleaning.
- Туташуу текшерүү: Regularly check all input and output wiring connections to ensure they are secure and free from corrosion.
- Экологиялык инспекция: Иштөө чөйрөсү белгиленген температура жана нымдуулук диапазондорунда калаарын текшериңиз.
7. Кыйынчылыктарды
If the power supply is not functioning as expected, refer to the following troubleshooting guide:
- No Output Voltage:
- Check if AC input power is present and connected correctly.
- Verify input fuse (if external) is intact.
- Ensure the unit is not in protection mode (e.g., due to overload or over-temperature). Disconnect power, wait a few minutes, and reapply.
- Output Voltage Өтө төмөн/Жогорку:
- Check the '+V ADJ' potentiometer setting.
- Ensure the load is not drawing excessive current, causing voltagд тамчы.
- Unit Shuts Down:
- Ашыкча жүктөн коргоо: If the load current exceeds 105-135% of the rated output power, the unit will enter hiccup mode and recover automatically once the fault condition is removed. Reduce the load.
- Voltage Коргоо: Эгерде чыгаша томtage exceeds 17.25-20.25V, the unit will shut down. Re-power the unit to recover.
- Температурадан ашыкча коргоо: If the internal temperature exceeds 80°C ±5°C, the unit will shut down. It will recover automatically once the temperature drops. Ensure proper ventilation.
- Желдеткич иштебейт:
- The fan operates based on temperature. It may not run at low loads or cool ambient temperatures.
- If the unit is hot and the fan is not running, check for obstructions or fan failure.
If problems persist after following these steps, contact qualified service personnel.
8. Техникалык шарттар
Detailed technical specifications for the Mean Well SP-240-15 power supply.

| Категория | Параметр | SP-240-15 |
|---|---|---|
| OUTPUT | DC VOLTAGE | 15V |
| БААЛГАН УЧУР | 16A | |
| УЧУРДАГЫ АРАКЕТ | 0 ~ 16А | |
| НИНАЛДУУ КҮЧ | 240 Вт | |
| RIPPLE ЖАНА ШУУ (макс.) | 150mVp-p | |
| ТОМTAGE ADJ. RANGE | 13.5 ~ 18V | |
| ТОМTAGE ТОлеранттуулук | ±1.0% | |
| САПТЫК ЖӨНГӨ салуу | ±0.5% | |
| ЖҮКТӨӨ ЖӨНҮНДӨ | ±1.0% | |
| ЖӨНДӨӨ, УБАКЫТТЫ КӨТӨР | 600ms, 50ms/230VAC; 1500ms, 50ms/115VAC толук жүктөөдө | |
| КҮТҮҮ УБАКЫТЫ (Тип.) | 20ms/230VAC; 20ms/115VAC толук жүктөөдө | |
| INPUT | ТОМTAGE RANGE | 88 ~ 264VAC; 124 ~ 370VDC |
| Жыштык диапазону | 47 ~ 63Hz | |
| КҮЧ ФАКТОРУ (Typ.) | PF>0.95/230VAC; PF>0.98/115VAC at full load | |
| НАТЫЙЖАЛУУ (Тип.) | 86% | |
| AC CURRENT (Тип.) | 3.6A/115VAC; 1.8A/230VAC | |
| INRUSH АГЫМЫ (тип.) | 25A/115VAC; 40A/230VAC | |
| АЧУУ АКЫ | <3.5mA/240VAC | |
| КОРГОО | АШЫК ЖҮКТӨӨ | 105 ~ 135% rated output power. Protection type: Hiccup mode, recovers automatically after fault condition is removed. |
| VOL VOLTAGE | 17.25 ~ 20.25V. Protection type: Shut down o/p voltagд, калыбына келтирүү үчүн кайра иштетүү. | |
| АШЫК ТЕМПЕРАТУРА | 80°C ±5°C (TSW1). Protection type: Shut down o/p voltage, recovers automatically after temperature goes down. | |
| ЧӨЙРӨ | ИШТЕГЕН ТЕМП. | -20 ~ +70°C (Refer to "Derating Curve") |
| ИШТЕГЕН НЫМДЫК | 20 ~ 90% RH конденсатсыз | |
| САКТОО ТЕМП., НЫМ | -40 ~ +85°C, 10 ~ 95% RH | |
| ТЕМП. КООФИЦИОНТ | ±0.03%/°C (0 ~ 50°C) | |
| ТИТИРҮҮ | 10 ~ 500Гц, 2G 10мин./1цикл, 60мин. ар бири X, Y, Z огу боюнча | |
| КООПСУЗДУК ЖАНА EMC | КООПСУЗДУК СТАНДАРТТАР | UL60950-1, TUV EN60950-1 approved |
| RESSTAND VOLTAGE | I/P-O/P:3KVAC; I/P-FG:1.5KVAC; O/P-FG:0.5KVAC | |
| ИЗОЛЯЦИЯГА КАРШЫЛЫК | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH | |
| EMC ЧЫГАРУУ | EN55022 (CISPR22) класс B, EN61000-3-2,-3 ылайык келүү | |
| EMC иммунитет | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A | |
| БАШКАЛАР | MTBF | 284.9 мин саат. MIL-HDBK-217F (25°C) |
| DIMENSION | 199*99*50мм (L*W*H) | |
| ПАКТОО | 0.8Kg; 16pcs / 13.8Kg / 0.04CUFT |
9. Кепилдик жана колдоо
The Mean Well SP-240-15 power supply comes with a 3 жылдык кепилдик сатып алынган күндөн тартып, нормалдуу пайдаланууда материалдардын жана жасалгалоонун кемчиликтерин жабуу.
For technical support, warranty claims, or service inquiries, please contact your authorized Mean Well distributor or reseller. Please have your product model number and purchase information available when contacting support.