Laserliner CoatingTest-Master 082.150A колдонуу боюнча колдонмо

1. Introduction and Overview

The Laserliner CoatingTest-Master 082.150A is a precision instrument designed for non-destructive measurement of coating thicknesses on various metal surfaces. It utilizes both magnetic induction and eddy current principles to accurately determine the thickness of non-metallic layers.

This device is capable of measuring non-magnetic coatings such as paint and zinc on steel, as well as insulating coatings like paint and anodized layers on non-ferrous metals. It features automatic identification of the base material (ferrous/ferromagnetic or non-ferrous/non-ferromagnetic), an internal memory for 400 measured values, and options for one-point and two-point calibration. Data transfer and evaluation are facilitated via a USB interface. The illuminated display provides Min/Max/Avg readings for comprehensive analysis.

Figure 1: Laserliner CoatingTest-Master 082.150A device.

2. Пакеттин мазмуну

Пакетти ачкандан кийин, төмөнкү нерселердин бардыгы камтылганын текшериңиз:

• Laserliner CoatingTest-Master 082.150A device
• Коргоочу капкак
• Маалыматтарды өткөрүү үчүн USB кабели
• Calibration foils/plates (for one-point and two-point calibration)
• Колдонмо (бул документ)
• Software CD (for data evaluation)
• Батареялар (эгер камтылган болсо)

Figure 2: Contents of the CoatingTest-Master package.

3. Орнотуу

3.1 Батареяны орнотуу

The CoatingTest-Master requires batteries for operation. Locate the battery compartment on the back of the device. Insert the specified battery type (e.g., AAA batteries) ensuring correct polarity as indicated inside the compartment. Close the battery cover securely.

3.2 Күйгүзүү/өчүрүү

басып, кармап туруңуз Күч button (usually marked with a power symbol ⏻) to turn the device on. The display will illuminate. To turn off the device, press and hold the Күч button again until the display shuts down.

4. Иштөө нускамалары

4.1 Негизги өлчөө

To perform a basic coating thickness measurement:

1. Түзмөк күйгүзүлгөнүн текшериңиз.
2. Place the small measuring head firmly and perpendicularly onto the surface to be measured. The device will automatically detect the base material (ferrous or non-ferrous).
3. The coating thickness reading will be displayed on the screen in micrometers (µm).
4. Lift the measuring head from the surface to prepare for the next measurement.

Figure 3: The device features a small measuring head for pinpoint accuracy.

4.2 Калибрлөө

For accurate measurements, especially when measuring different types of coatings or base materials, calibration is essential. The CoatingTest-Master supports one-point and two-point calibration.

4.2.1 Бир чекиттүү калибрлөө

This method uses a single known thickness to adjust the device. Refer to the on-screen prompts or specific manual section for detailed steps on using the provided calibration foils.

4.2.2 Эки чекиттүү калибрлөө

This method uses two known thicknesses (e.g., zero and a specific thickness) for more precise calibration across a range. Follow the device's on-screen instructions for this procedure.

4.3 Маалыматтарды башкаруу

The device has an internal memory for up to 400 measured values. Use the navigation buttons to review stored data. To transfer data to a computer, connect the device via the provided USB cable and use the accompanying software for evaluation.

4.4 Дисплей функциялары

The illuminated display shows the current measurement, and can also cycle through Minimum (Min), Maximum (Max), and Average (Avg) values of a series of measurements. Consult the device's on-screen menu for accessing these display modes.

5. Техникалык тейлөө

Proper maintenance ensures the longevity and accuracy of your CoatingTest-Master.

• Тазалоо: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the measuring head is kept clean and free of debris.
• Сактагыч: When not in use, store the device in its protective carrying case in a dry, dust-free environment, away from extreme temperatures and direct sunlight.
• Батареяны алмаштыруу: Replace batteries promptly when the low battery indicator appears on the display to avoid interruption of measurements and potential data loss.

6. Кыйынчылыктарды

7. Техникалык шарттар

8. Кепилдик жана колдоо

Laserliner products are manufactured with high quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Laserliner webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

For further assistance, you may contact Laserliner customer service through their official channels. Contact details are typically available on the manufacturer's webсайтында же продуктунун таңгагында.