Evotech Performance Fender Eliminator / Tail Tidy Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Evotech Performance Fender Eliminator / Tail Tidy. Designed specifically for the Suzuki Gladius (SFV650) models from 2009 to 2016, this product replaces the bulky factory fender with a sleek, lightweight unit, improving the aesthetic appeal of your motorcycle's rear end while maintaining functionality for license plate mounting and illumination.

Коопсуздук маалыматы

Always exercise caution when working on your motorcycle. Ensure the motorcycle is stable on a stand before beginning any work. Disconnect the battery's negative terminal before working with electrical components. Wear appropriate personal protective equipment, such as gloves and eye protection. If you are unsure about any step, consult a qualified motorcycle mechanic.

• Ensure the motorcycle is securely supported.
• Disconnect the battery before electrical work.
• Use correct tools for each fastener.
• Do not overtighten fasteners.
• Verify all connections are secure before riding.

Компоненттер бүттүview

Your Evotech Performance Fender Eliminator kit includes the following components:

1-сүрөт: Disassembled components including the main mounting bracket, license plate bracket, and LED light unit.

2-сүрөт: The main components assembled, showing the integrated LED license plate light and mounting points for turn signals.

• Main Mounting Bracket (Black aluminum)
• License Plate Bracket (Black aluminum)
• Integrated LED License Plate Light
• Fasteners and Spacers (Various sizes)
• Wiring Harness (for LED light)

Орнотуу (Орнотуу)

This section outlines the steps required to install the Evotech Performance Fender Eliminator on your Suzuki Gladius (SFV650).

Керектүү куралдар:

• Розетка ачкычтарынын топтому
• Hex Key Set (Allen wrenches)
• Wire Strippers/Crimpers (for electrical connections)
• Zip Ties (optional, for cable management)
• Threadlocker (medium strength, recommended)

Орнотуу кадамдары:

1. 1. Prepare the Motorcycle:

   Park your Suzuki Gladius on a stable surface, preferably on a rear stand. Ensure the engine is cool. Disconnect the negative terminal of the battery to prevent accidental electrical shorts.

2. 2. Remove the Stock Fender:

   Locate and remove the bolts securing the stock rear fender assembly. Carefully disconnect any wiring for the stock license plate light and turn signals. Note the routing of these wires for re-connection. Gently pull the stock fender away from the motorcycle.

3. 3. Mount the Main Bracket:

   Position the Evotech Performance main mounting bracket onto the motorcycle's subframe, aligning it with the factory mounting points. Secure it using the provided fasteners. Apply a small amount of medium-strength threadlocker to the bolts before tightening them to the manufacturer's recommended torque specifications (if available, otherwise hand-tight plus a quarter turn).

   

   3-сүрөт: The main bracket assembly, ready for installation or showing its compact design.

4. 4. Install License Plate Bracket and LED Light:

   Attach the license plate bracket to the main mounting bracket using the supplied hardware. The integrated LED license plate light is typically pre-installed or easily attaches to the main bracket. Ensure it is securely fastened and oriented correctly for optimal illumination of the license plate.

   

   4-сүрөт: Side profile of the installed eliminator, highlighting the slim design and LED light placement.

5. 5. Wire the LED License Plate Light:

   Connect the wiring for the new LED license plate light to the motorcycle's existing license plate light wiring. This usually involves splicing the wires. Ensure correct polarity (positive to positive, negative to negative). Use appropriate electrical connectors (e.g., crimp connectors, solder and heat shrink) to ensure a secure and weather-resistant connection. Route the wires neatly and secure them with zip ties to prevent chafing or interference with moving parts.

6. 6. Reconnect Turn Signals (Optional/If Applicable):

   If your kit includes provisions for aftermarket turn signals or allows re-use of stock signals, mount them to the designated points on the new bracket. Connect their wiring to the motorcycle's turn signal harness. Test all lights before proceeding.

   

   5-сүрөт: Арткы view of the motorcycle with the fender eliminator installed, showing the compact appearance and turn signal integration.

   

   6-сүрөт: Side view of the motorcycle after installation, demonstrating the cleaner rear profile.

7. 7. Attach License Plate:

   Mount your license plate to the new bracket using appropriate hardware. Ensure it is securely fastened and clearly visible.

   

   7-сүрөт: Деталдаштырылган view of the installed unit, highlighting the license plate mounting area and LED light.

8. 8. Акыркы текшерүүлөр:

   Reconnect the battery's negative terminal. Test the license plate light, brake light (if integrated), and turn signals to ensure they function correctly. Double-check all fasteners for tightness. Ensure no wires are pinched or exposed. Take the motorcycle for a short, slow test ride to confirm stability and proper function.

Иштеп жатат

Once installed, the Evotech Performance Fender Eliminator operates passively as a mounting solution for your license plate and its illumination. Ensure your license plate is always clean and clearly visible. The integrated LED light is designed for long-term, maintenance-free operation, providing bright and efficient illumination for your license plate as required by law.

Техникалык тейлөө

The Evotech Performance Fender Eliminator is constructed from durable aluminum and requires minimal maintenance.

• үзгүлтүксүз тазалоо: Clean the unit periodically with a mild soap and water solution to remove dirt and road grime. Avoid abrasive cleaners or solvents that could damage the finish.
• Бекер текшерүүлөр: Periodically inspect all mounting bolts and fasteners for tightness, especially after the first few rides following installation. Vibrations from motorcycle operation can sometimes loosen fasteners. Re-tighten as necessary.
• Зымдарды текшерүү: Occasionally check the wiring connections for the LED light to ensure they remain secure and free from corrosion or damage.
• LED жарык функциясы: Regularly verify that the LED license plate light is functioning correctly.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

For warranty information or technical support regarding your Evotech Performance Fender Eliminator, please refer to the official Evotech Performance webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.

Evotech Performance Official Webсайт: www.evotech-performance.com