Audio-Technica AT-LP60XUSB Turntable Instruction Manual

Introduction

The Audio-Technica AT-LP60XUSB is a fully automatic belt-drive stereo turntable designed for high-fidelity vinyl audio playback and digital conversion. It supports both 33-1/3 and 45 RPM records and features a USB output for direct connection to a computer, allowing users to convert vinyl to digital audio files. The turntable includes a built-in switchable phono preamp, enabling direct connection to home stereo systems, powered speakers, or other components, regardless of whether they have a dedicated phono input. Its redesigned tonearm base and headshell improve tracking and reduce resonance, while an external AC adapter minimizes noise in the signal chain.

1-сүрөт: Жогорку view of the Audio-Technica AT-LP60XUSB Turntable with dust cover closed.

Кутуда эмне бар

• Turntable chassis with preinstalled cartridge
• Platter with drive belt
• Кийиз килем
• Dust cover and hinges
• AC кубат адаптери
• USB кабели
• Ажыратылуучу RCA чыгаруу кабели (3.5 мм эркектен кош RCA эркекке)
• 45 RPM адаптери

Жайгашуу

Before operating your turntable, ensure all components are carefully unpacked and assembled as described below. For a visual guide, please refer to the official setup video.

2-сүрөт: жогорудан ылдыйга view of the Audio-Technica AT-LP60XUSB Turntable, showing the platter and tonearm assembly.

1. Табакты жана Drive Белди орнотуу

1. Carefully place the platter onto the spindle, ensuring it is fully seated.
2. Locate the red ribbon on the platter. This ribbon is used to guide the drive belt.
3. Rotate the platter by hand until the rectangular opening with the red ribbon exposes the brass motor pulley, located in the upper left-hand corner opposite the tonearm. Do not confuse it with the white plastic post near the tonearm.
4. While holding the platter steady, remove the tape securing the red ribbon.
5. Holding both ends of the red ribbon, carefully place the drive belt over the brass motor pulley.
6. Once the belt is seated in the pulley's groove, carefully remove the ribbon and verify that the belt is not twisted.
7. Табактын үстүнө кийиз килемчесин коюңуз.
8. With the tonearm still fastened to its rest, carefully rotate the platter by hand 10 times in a clockwise direction. This ensures the automatic mechanism is fully cycled.

2. Stylus Guard Removal

• Carefully remove and discard the twist-tie securing the tonearm to its rest.
• While holding the tonearm, carefully remove the plastic stylus guard by slowly pulling it forward. Be cautious not to damage the exposed stylus.

3. Айлануучу табакты жайгаштыруу

For optimal operation, the turntable should be placed on a solid, level surface to prevent vibrations and ensure stable playback.

4. Power Connection

• Connect the power adapter cable to the DC IN 12V port on the rear of the turntable.
• Plug the AC power adapter into a convenient wall outlet.

5. Аудио байланыштары

The AT-LP60XUSB offers both USB digital output and analog audio output for versatile connectivity.

• USB санарип чыгышы: Connect the included USB cable from the turntable's USB port to an open USB port on your Mac or PC computer. This allows for direct digital recording of your vinyl records using third-party recording software like Audacity, without the need for special drivers.
• Аналогдук аудио чыгаруу: The turntable features a built-in switchable phono preamp.
  • If your audio device (amplifier, receiver) has its own built-in RIAA preamp (phono inputs), set the PHONO-LINE selector switch on the rear of the turntable to the ТЕЛЕФОН position. This bypasses the turntable's internal phono preamp.
  • If connecting to an "AUX" or line-level input on powered speakers, soundbars, amplifiers, or other devices that do not have a dedicated phono input, set the PHONO-LINE selector switch to the LINE position. This utilizes the turntable's internal RIAA equalized phono preamp.
  • Use the included 3.5 mm male to dual RCA male cable to connect the turntable's analog output to the appropriate RCA-type phono or auxiliary inputs on your ampкөтөргүч же кабыл алгыч.

3-сүрөт: Арткы view of the turntable showing the USB, Analog Out, and PHONO-LINE selector switch.

Иштөө нускамалары

1. Жазууну ойнотуу

1. Place a record on the platter. If playing a 45 RPM single, place the 45 RPM adapter over the center spindle.
2. Select the appropriate speed (33-1/3 or 45 RPM) using the speed selector switch.
3. басыңыз START button. The tonearm will automatically move to the beginning of the record and begin playback.
4. To stop playback and return the tonearm to its rest, press the ТОКТОТ баскычы.
5. To manually lift the tonearm during playback, press the ТОНААРМ КӨТӨРҮҮ button. Press it again to lower the tonearm.

2. Dust Cover Usage

The turntable includes a plastic dust cover to protect it from dust and debris when not in use. For best audio results and to prevent potential resonance, it is recommended to remove or open the dust cover when playing records.

Техникалык тейлөө

• Стилусту тазалоо: Use a soft brush to gently clean the stylus in a back-to-front motion. Avoid side-to-side movements.
• Айланма табакчаны тазалоо: Wipe the turntable chassis and dust cover with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Жазуу кам көрүү: Жазууларыңызды таза жана чаңсыз кармаңыз. Аларды жеңдеринин ичинде тигинен салып, кыйшайып кетпеши үчүн сактаңыз.
• Белди алмаштыруу: The drive belt is a wear item and may need replacement over time if speed inconsistencies occur. Refer to Audio-Technica's support resources for replacement parts and instructions.

Проблемаларды чечүү

Техникалык шарттар

• Бренд: Audio-Technica
• Модель аты: AT-LP60XUSB
• Түрү: Fully Automatic Belt-Drive Stereo Turntable
• Мотор: DC серво башкарылат
• Айдоо ыкмасы: Ремень-диск
• Ылдамдыктар: 33-1 / 3 RPM, 45 RPM
• Бурулма табак: Алюминий
• Байланыш технологиясы: Wired (USB, Analog RCA)
• Кубат булагы: Электр зымдары (AC адаптер)
• Камтылган медиа: Turntable, Detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, Removable hinged dust cover
• Материал: Пластик
• Элемент Салмагы: 2.6 грамм

Кепилдик жана колдоо

The Audio-Technica AT-LP60XUSB turntable comes with a 3 жылдык кепилдик. For detailed warranty information, technical support, or to inquire about replacement parts, please visit the official Audio-Technica webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

кире аласыз Amazonдагы аудио-техникалык дүкөн көбүрөөк продукт маалымат жана колдоо ресурстар үчүн.