BLACK+DECKER 18V ​​Li-Ion зымсыз бургулоочу драйвердин колдонуу боюнча колдонмосу

Introduction

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your BLACK+DECKER 18V Li-Ion Cordless Drill Driver (Model: BDCDC18BAST-QW). Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.

The BLACK+DECKER BDCDC18 cordless drill driver features a 10 mm chuck, designed for various drilling and screwing tasks in wood and metal. It offers 10 torque positions for precise screwing and a variable speed trigger (0 to 650 rpm) for optimal control. With a maximum torque of 30 Nm, it can drill up to 25 mm in wood and 10 mm in metal. Powered by a lithium-ion battery, it offers fade-free power and minimal self-discharge.

Кутуда эмне бар

Your BLACK+DECKER 18V Li-Ion Cordless Drill Driver package includes the following components:

• BLACK+DECKER 18V Cordless Drill Driver
• 2 x 18V 1.5Ah литий-иондук батарейкалар
• Батарея заряддагыч
• 160 Accessories (various drill bits, screwdriver bits, etc.)
• Сактоочу куту

Image: Contents of the BLACK+DECKER 18V Li-Ion Cordless Drill Driver kit, including the drill, two batteries, charger, and a wide array of 160 accessories, all neatly organized within the storage case.

Жайгашуу

1. Батареяны заряддоо

Before first use, fully charge the battery. Connect the charger to a standard power outlet. Slide the battery pack onto the charger until it clicks into place. The charging indicator light will show the charging status. A full charge typically takes approximately 3-5 hours. Always use the BLACK+DECKER charger supplied with your tool.

2. Батареяны орнотуу/чыгаруу

To install the battery, align the battery pack with the receptacle on the tool and slide it in until it locks securely. To remove, press the battery release button (usually located on the front or sides of the battery) and slide the battery pack out.

3. Installing/Removing Drill Bits or Screwdriver Bits

1. Куралдын өчүрүлгөнүн жана коопсуздук үчүн батарейканын алынып салынганын текшериңиз.
2. Патрондун жакаларын ачуу үчүн, патрондун жакасын сааттын жебесине каршы айландырыңыз.
3. Каалаган бургу учун же отвертка учун патронго салып, анын борборлоштурулганын текшериңиз.
4. Жаактарды биттин айланасына бекем бекемдөө үчүн патрондун жакасын сааттын жебеси боюнча айлантыңыз. Кол менен гана бекемдөө; ачкычты колдонбоңуз.
5. To remove, rotate the chuck collar counter-clockwise and pull the bit out.

Иштөө нускамалары

1. Күйгүзүү/өчүрүү жана өзгөрүлмө ылдамдыкты башкаруу

The tool is activated by pressing the trigger switch. The speed is variable; the further the trigger is pressed, the faster the tool operates. Release the trigger to turn the tool off. The integrated LED light illuminates the work area when the trigger is pressed.

2. Алга/Артка тандоо

A slide switch located above the trigger controls the direction of rotation. Push the switch to the left for forward rotation (for drilling and screwing in). Push it to the right for reverse rotation (for unscrewing). Position the switch in the center to lock the trigger and prevent accidental starting.

3. Моментти тууралоо

The torque collar, located behind the chuck, allows you to select from 10 torque settings plus a drilling mode. Rotate the collar to align the desired setting with the indicator arrow. Lower numbers are for driving small screws or working with soft materials, while higher numbers and the drill symbol are for drilling or driving large screws into harder materials.

• Бурама: Select a lower torque setting to prevent over-tightening or damaging the screw head/material. Increase the setting if the screw is not driven deep enough.
• Бургулоо: Always select the drill symbol setting for drilling operations to achieve maximum power.

Image: A woman wearing safety glasses demonstrates the use of the BLACK+DECKER cordless drill driver for screwing into a wooden fence post, highlighting its ergonomic design and ease of use for outdoor tasks.

Image: A man uses the BLACK+DECKER cordless drill driver to drill into wooden stairs, showcasing its versatility for various home improvement projects.

Сүрөт: жакын план view of a hand operating the BLACK+DECKER cordless drill driver to install a cabinet hinge, illustrating its precision for detailed work.

Техникалык тейлөө

1. Жалпы тазалоо

Ашыкча ысып кетүүнүн алдын алуу үчүн аспаптын желдетүү тешиктерин таза кармаңыз. жумшак колдонуу, damp cloth to wipe down the exterior. Do not use abrasive cleaners or solvents. Regularly remove dust and debris from the chuck and motor housing.

2. Батареяга кам көрүү жана сактоо

• Батареяларды күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
• Батареяларды көпкө чейин заряды түгөнгөн абалда сактабаңыз. Колдонулбаса, аларды мезгил-мезгили менен кубаттап туруңуз.
• Батарея терминалдарын кыска туташуудан коргоңуз.
• Эски батареяларды жергиликтүү эрежелерге ылайык таштаңыз.

3. Accessory Maintenance

Keep drill bits and screwdriver bits clean and sharp for optimal performance. Replace worn or damaged accessories promptly.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

BLACK+DECKER products are manufactured to high quality standards and are guaranteed for professional and home use. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official BLACK+DECKER webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.

Көбүрөөк жардам алуу үчүн, сиз BLACK+DECKER кардарларды тейлөө кызматына алардын расмий каналдары аркылуу кайрылсаңыз болот.