TERRAMASTER TD2 Thunderbolt 3

TERRAMASTER TD2 Thunderbolt 3 2-Bay External Hard Drive Enclosure User Manual

Model: TD2 Thunderbolt 3

1. Киришүү

The TERRAMASTER TD2 Thunderbolt 3 is a professional-grade 2-bay external hard drive enclosure designed for high-speed data storage and management. It supports 3.5-inch and 2.5-inch SATA HDDs and 2.5-inch SATA SSDs, offering flexible RAID configurations (RAID 0, RAID 1, JBOD, SINGLE) to meet various performance and data protection needs. With two 40Gbps Thunderbolt 3 interfaces, it provides rapid data transfer speeds and supports daisy-chaining of up to six devices, as well as multi-screen display capabilities.

2. Пакеттин мазмуну

  • TERRAMASTER TD2 Thunderbolt 3 Enclosure
  • Кубаттуу адаптер
  • Thunderbolt 3 кабели
  • Accessory Kit (screws, screwdriver)
  • Ыкчам орнотуу колдонмосу

3. Продукт бүтүп калдыview

3.1 алдыңкы панели

Фронт view of TERRAMASTER TD2 Thunderbolt 3 enclosure

The front panel features two drive bays for hard drive installation. On the left side, there are LED indicators for HDD 1, HDD 2, and Power, providing status information for each drive and the device's operational state. A power button is located below the indicators.

3.2 Арткы панель

Арткы view of TERRAMASTER TD2 Thunderbolt 3 enclosure showing ports and RAID switch

The rear panel includes a fan for heat dispersion, a RAID mode switch with a reset button, a Mini DisplayPort 1.4, two Thunderbolt 3 (USB-C) interfaces (one for PC connection, one for daisy-chaining), and a DC 12V power input port.

4. Орнотуу

4.1 Дискти орнотуу

  1. Корпусу өчүрүлгөнүн жана компьютериңизден ажыратылганын текшериңиз.
  2. Gently pull the drive trays out from the front of the enclosure.
  3. For 3.5-inch HDDs, align the screw holes on the drive with those on the tray and secure with the provided screws. For 2.5-inch HDDs/SSDs, use the appropriate mounting holes and screws.
  4. Slide the populated drive trays back into the enclosure until they click into place.

4.2 RAID конфигурациясы

Diagram illustrating RAID 0 and RAID 1 configurations

The TD2 Thunderbolt 3 supports hardware RAID modes: RAID 0, RAID 1, JBOD, and SINGLE. Always back up your data before changing RAID modes, as this will erase all data on the drives.

  • RAID 0 (Striping): Combines drives for maximum performance and capacity, but offers no data redundancy.
  • RAID 1 (көзгө түшүрүү): Duplicates data across drives for data redundancy. Capacity is limited to the smallest drive.
  • JBOD (Just a Bunch Of Disks): Treats drives as independent volumes.
  • БИР: Each drive is recognized as a separate volume.

To configure RAID:

  1. With the enclosure powered off, use a small tool (like a paperclip) to rotate the RAID mode switch on the rear panel to your desired setting.
  2. Press and hold the reset button next to the RAID switch for approximately 5 seconds until the device restarts.
  3. Connect the enclosure to your computer and initialize/format the drives as required by your operating system.

4.3 Компьютериңизге туташуу

Use the provided Thunderbolt 3 cable to connect one of the Thunderbolt 3 ports on the enclosure (labeled 'PC') to a Thunderbolt 3 port on your computer. Ensure your computer's operating system (Linux, Mac, Windows) has the necessary Thunderbolt 3 drivers installed.

5. Иштөө

5.1 Күйгүзүү/өчүрүү

Press the power button on the front panel to turn the device on. The power LED will illuminate. To power off, press and hold the power button until the device shuts down.

5.2 Маалыматтарды өткөрүү

Speedometer indicating 760 MB/s data transfer speed

The TD2 Thunderbolt 3 offers reading speeds up to 760MB/s (with SSHD in RAID 0). Once connected and configured, the enclosure will appear as a storage device on your computer, allowing you to drag and drop files or use it with your preferred applications.

5.3 Көп экрандуу дисплей

Diagram showing a laptop connected to the TD2, which then connects to two 4K monitors

Capitalizing on the Thunderbolt 3 and Mini DisplayPort interfaces, the TD2 Thunderbolt 3 supports multi-screen display with up to three screens. Connect your primary display to your computer, and then connect additional monitors to the Mini DisplayPort and the secondary Thunderbolt 3 port on the TD2 enclosure.

5.4 Daisy-Chaining

Diagram illustrating daisy-chaining of multiple TD2 enclosures from a laptop

The TD2 Thunderbolt 3 allows you to daisy-chain up to six devices. Connect the first TD2 to your computer, then connect the second TD2 to the available Thunderbolt 3 port on the first TD2, and so on. This expands your storage and connectivity options.

5.5 Электр энергиясын жеткирүү

The Thunderbolt 3 connection provides up to 15W of power delivery to recharge compatible laptops (Mac only, Windows not supported).

6. Техникалык тейлөө

6.1 Жылуулукту башкаруу

The aluminum-alloy shell and 80mm fan ensure efficient heat dispersion, maintaining optimal operating temperatures for your drives. Ensure the fan vents on the rear panel are not obstructed to allow for proper airflow.

6.2 Drive Replacement

In RAID 1, JBOD, or SINGLE modes, individual drives can be replaced. For RAID 1, if a drive fails, replace it with a new drive of equal or greater capacity. The system should automatically begin rebuilding the array. Consult the TERRAMASTER support website for detailed instructions on drive replacement and RAID rebuilding procedures.

7. Кыйынчылыктарды

  • Түзмөк таанылган жок: Ensure the Thunderbolt 3 cable is securely connected to both the enclosure and your computer. Verify that your computer has the latest Thunderbolt 3 drivers installed. Try connecting to a different Thunderbolt 3 port or using a different cable.
  • Drives not appearing: After initial setup or changing RAID modes, drives may need to be initialized and formatted through your operating system's Disk Management utility (Windows) or Disk Utility (macOS).
  • Жай которуу ылдамдыктары: Ensure you are using a certified Thunderbolt 3 cable. Check your RAID configuration; RAID 0 offers the highest speeds, while RAID 1 prioritizes data redundancy. The performance of your drives (HDD vs. SSD) also impacts speed.
  • RAID rebuild issues: If a drive in a RAID 1 array fails and is replaced, ensure the new drive is healthy and of sufficient capacity. If the rebuild does not start automatically, consult the TERRAMASTER support documentation for manual rebuild procedures.
  • Ашыкча ысып кетүү: Ensure the enclosure's fan vents are clear of obstructions. Operate the device in a well-ventilated area.

8. Техникалык шарттар

ӨзгөчөлүкДеталь
МоделTD2 Thunderbolt 3
МатериалАлюминий
Drive Bays2
Шайкеш келген дисктер3.5" and 2.5" SATA HDD, 2.5" SATA SSD
RAID режимдериRAID 0, RAID 1, JBOD, SINGLE
Интерфейс2 x Thunderbolt 3 (40Gbps), 1 x Mini DisplayPort 1.4
Макс сактоо сыйымдуулугуUp to 40TB (20TB x 2, in RAID 0)
Маалыматтарды өткөрүү ылдамдыгыUp to 760MB/s (with SSHD in RAID 0)
Power DeliveryUp to 15W (Mac only)
Муздатуу80мм желдеткич
Шайкеш OSLinux, Mac, Windows
Продукциянын өлчөмдөрү (LxWxH)8.94 x 5.24 x 4.79 дюйм
Элемент Салмагы3.08 фунт

9. Кепилдик жана колдоо

TERRAMASTER products are covered by a limited warranty. For detailed warranty information, technical support, and additional resources, please visit the official TERRAMASTER webсайт же алардын Amazon дүкөнүнүн баракчасы.

Official TERRAMASTER Store: Visit TERRAMASTER Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.